Universal-scrapers 150 mm

Breite in mm:	150 mm

Breite in mm:	150 mm

Product Nr.	Product	Breite in mm
51A300	Universal-scrapers 300 mm	300 mm
51A500	Universal-scrapers 500 mm	500 mm
51A150	Universal-scrapers 150 mm	150 mm

Universal-scrapers 300 mm

Width: 300 mm Height: 160 mm with shaft

Universal-scrapers 500 mm

Width: 500 mm Height: 160 mm with shaft made of beechwood

Deckenrandschalung XPS 50 FZ ISO

Slab edge shuttering and insulation in one. 50 mm extruded polystyrene. Foot is made of 4mm fibre cement (Width 10 cm) Elements with tongue and groove. Standard in 1 or 2 metre elements, other lengths on request.

ZZ-batten

Skidproofed and tilt secured spacer for the bottom reinforcement. There will be no shrinking as the concrete encloses the batten completly. Due to the special form a linear interruption can be avoided. Mill lenghts 200 cm. Other lenghts available.

Deckenrandschalung XPS 50 FZ ISO

Slab edge shuttering and insulation in one. 50 mm extruded polystyrene. Foot is made of 4mm fibre cement (Width 10 cm) Elements with tongue and groove. Standard in 1 or 2 metre elements, other lengths on request.

Baustütze - Mini (DC)

With covered thread (DC). Headplate: 120 x 120 x 5 mm, with borehol ø 40 mm G-hook: Ø 12 mm (no loosing) with bearing ring (loose) Failure loads tested at concentric load, pay attention to security factor!

ZZ-batten

Skidproofed and tilt secured spacer for the bottom reinforcement. There will be no shrinking as the concrete encloses the batten completly. Due to the special form a linear interruption can be avoided. Mill lenghts 200 cm. Other lenghts available.

Formwork oil Prägnit ST300

Tested formwork oil suitable for all formworks. Good degradable with certificate Mixture of mineral oil and plant-based oil Apply a thin layer for best effect with protection of the formwork. No cleaning of the formwork neccessary. Degredable for 81% within 21 days.

Schrägstütze 2,30 - 4,10 m DC

All versions with failure protection, accident proof. Universally usable as pressure- and traction props to support and adjust prefabricated concrete elements and formwoks. Flexible head- and baseplate Headplate: 140 x 100 x 6 mm, with hole ø 20 mm G-hook: Ø 14 mm (no loosing)

Schrägstütze 2,10 - 3,60 m DC

All versions with failure protection, accident proof. Universally usable as pressure- and traction props to support and adjust prefabricated concrete elements and formwoks. Flexible head- and baseplate Headplate: 140 x 100 x 6 mm, with hole ø 20 mm G-hook: Ø 14 mm (no loosing)

Properties

Description

Properties