Skip to main content Skip to search Skip to main navigation Skip to B2B platform navigation
Skip product gallery

Customers also viewed

Spacer tubes with a roughened surface

Spacer tubes with a roughened surface from Ø 20mm to Ø 40 mm in bundlesØ 20mm to Ø 22mm 100 running meters per bundleØ 26mm to Ø 32mm 50 running meters per bundleØ 40mm 30 running meters per bundle

Pressure cone standard (PVC-free)

The pressure cones are attached to the spacer tube. After concreting, the pressure cones are removed from the concrete and can be reused.

Mobile fence gz. heigth 120 cm

Mobile fences are robust,  versatile fence-system for short run and effective hedge for building sites and events.  The elements with circumferential frame can be connected with the hooks - loops system. The length of the Standard elements = 342 cm.

Kunststoff - Fenster ohne Schalung DKI

Plastic basement windows Sash and frame made of high quality plastic Color white circumferential rubber seal Turn / tilt fitting Double glazing

Universal-scrapers 300 mm

Width: 300 mm Height: 160 mm with shaft

Shuttering element ABS - profiled for joint seal

Shuttering element for joint seal sheet (VIBAFlex, VIBA Sinterflex, etc.), suitable for construction joints in walls in accordance with DIN EN 1992-1-1/NA. The sealing is made by the waterstop seal sheet. The formwork consists of a stable, fine-meshed expanded metal, which, in the keyed version, is profiled in accordance with DIN EN 1992-1-1/NA. The elements feature a slot for accommodating the waterstop sheet to be installed on site.

Exposed conrete release agent VIBA-Saubär BIO

VIBA - Saubär is an environmentally friendly release agent emulsion based on renewable raw materials. It has been specially developed for producing high-quality exposed concrete surfaces in both precast and cast-in-place concrete construction. The special formulation ensures very bright, high-quality concrete surfaces. Application VIBA - Saubär is applied evenly, thinly and sparingly using a standard commercially available spray device. Puddles and accumulations of material should be avoided, as these can lead to a reduction in the quality of the concrete surface, particularly in recesses and along edges. After application, the emulsion forms a milky-white film, which disappears once the water component has evaporated. Concreting can then begin. The evaporation time depends on weather conditions (approx. 10–30 minutes at 20 °C and 60% relative humidity). Properties Based on renewable raw materials Excellent release properties Suitable for visually high-quality and bright concrete surfaces Environmentally friendly: FREE FROM solvents and mineral oils Low odour Ready to use Easy to spray

Druckkonus lang PVC frei

Cones made of plastic, suitable for tube struts with a inner diameter of 22 mm respectively 26 mm. The remaining conical openings, after removing the pressure cones, are sealed with conrecte cones 40/5 and sealing adhesive. Pressure cones are reuseable.

Shuttering element ABS - profiled for joint seal

Shuttering element for joint seal sheet (VIBAFlex, VIBA Sinterflex, etc.), suitable for construction joints in walls in accordance with DIN EN 1992-1-1/NA. The sealing is made by the waterstop seal sheet. The formwork consists of a stable, fine-meshed expanded metal, which, in the keyed version, is profiled in accordance with DIN EN 1992-1-1/NA. The elements feature a slot for accommodating the waterstop sheet to be installed on site.

Console 65 cm lacquered

To the adaptation of the stand to every arbitrary facade form. To the widening of the work surface.