Go to homepage
Catalogue
Wishlist
Request Basket
Categories
Skip image gallery
Shuttering element ABS - profiled for joint seal

Properties

Länge in m: 2,4 m
Wall strength in cm: 25 cm

Shuttering element ABS - profiled for joint seal

Product number: 61HSABS150
Wall strength in cm
m
m

Description

Shuttering element for joint seal sheet (VIBAFlex, VIBA Sinterflex, etc.), suitable for construction joints in walls in accordance with DIN EN 1992-1-1/NA.

The sealing is made by the waterstop seal sheet. The formwork consists of a stable, fine-meshed expanded metal, which, in the keyed version, is profiled in accordance with DIN EN 1992-1-1/NA. The elements feature a slot for accommodating the waterstop sheet to be installed on site.

Properties

Länge in m: 2,4 m
Wall strength in cm: 25 cm
Filter products
Variants

With the help of our variant list you can find your article faster and easier.

Product Nr.
Product
Wall strength in cm
61HSABS150
 Shuttering element ABS - profiled for joint seal
25 cm
61HSABS200
 Shuttering element ABS - profiled for joint seal
30 cm
61HSABS300
 Shuttering element ABS - profiled for joint seal
40 cm
61HSABS400
 Shuttering element ABS - profiled for joint seal
50 cm
Skip product gallery

Zubehör

VIBA-Flex Joint sheet without feet

Joint tape for more stability light angle.The sealing plate is made of galvanised steel and has polymer bitumen coating on both sides (Adhesive coating).  

Details
VIBA-Proofflex – Premium Steel Waterstop 150 mm with Double-Sided Bonding Coating

Double-sided, fully coated, pressure-resistant waterstop element for construction joint sealing. The pressure-sensitive fresh concrete bonding coating with an enlarged surface area creates an exceptionally strong bond with the concrete and remains permanently active throughout the service life. A bentonite sealing strip is integrated at the joint overlap. Applications: VIBA-Proofflex Premium is designed for the internal sealing of construction joints (maximum joint opening up to 0.25 mm) and controlled crack joints (maximum joint opening up to 1.0 mm) in concrete structures with high resistance to water penetration against: Ground moisture and non-pressurized water Pressurized water Areas with fluctuating water levels. The sealing system complies with the requirements of Utilization Class A for Exposure Classes 1 and 2 in accordance with the German WU Guideline for Waterproof Concrete Structures.

VIBA Sinterflex waterstop sheet

Our VIBA Sinterflex waterstop sheet is coated on both sides with a patented “active” special coating. This coating is non-sticky and does not require any protective film to be removed before concreting. The coating bonds with the concrete through a natural reaction with the surrounding concrete, thereby actively sealing the joint to be waterproofed. The joint is actively sintered by the special coating and therefore becomes increasingly dense over time. This process is referred to as active sintering or active mineralizing deep sealing. The unique bond between the active VIBA Sinterflex special coating and fresh concrete reliably prevents water from migrating around the VIBA Sinterflex waterstop system. For secure sealing, a concrete embedment of only 3 cm is sufficient. VIBA Sinterflex is water-reactive and therefore actively seals construction joints and designed crack joints through a natural concrete-technology process. Water pressures up to and including 5 bar = 50 m water column can be safely sealed.

Skip product gallery

Ähnliche Artikel

Abschalelement mit Fugenbandhalter Typ E 93 für Boden oder Wand

Stop end panel made of a wave-profiled perforated metal plate in order to set a stop end in the wall or in the bottom plate.

Details
Skip product gallery

Customers also viewed

Shuttering element ABS - profiled for joint seal

Shuttering element for joint seal sheet (VIBAFlex, VIBA Sinterflex, etc.), suitable for construction joints in walls in accordance with DIN EN 1992-1-1/NA. The sealing is made by the waterstop seal sheet. The formwork consists of a stable, fine-meshed expanded metal, which, in the keyed version, is profiled in accordance with DIN EN 1992-1-1/NA. The elements feature a slot for accommodating the waterstop sheet to be installed on site.

Stop end panel with water bar holder wall/wall - plate/plate

Stop end panel made of a wave-profiled perforated metal plate in order to set a stop end in the wall or in the bottom plate.

Shuttering element ABS - profiled for joint seal

Shuttering element for joint seal sheet (VIBAFlex, VIBA Sinterflex, etc.), suitable for construction joints in walls in accordance with DIN EN 1992-1-1/NA. The sealing is made by the waterstop seal sheet. The formwork consists of a stable, fine-meshed expanded metal, which, in the keyed version, is profiled in accordance with DIN EN 1992-1-1/NA. The elements feature a slot for accommodating the waterstop sheet to be installed on site.

Ribbed drawn metal Superrip

Used as shuttering formwork in concrete and reinforced concrete construction. Longitudinal ribs ensure high load-bearing capacity. Strong composite effect becauce of the strong surface profiling. Particularly high stability thanks to 21 mm high ribs and bead reinforcement as well as a higher material thickness of 0.4 or 0.6 mm. Very cost-effective, as there is no need to remove or clean the formwork Element size 200 x 44.5 cm

Stop end panel with water bar holder wall/wall - plate/plate

Stop end panel made of a wave-profiled perforated metal plate in order to set a stop end in the wall or in the bottom plate.

Storagecontainer

The container is equipped with a double door with handle and lock at the front side. Whole container can be disassembled  and be easíly transported. The assembled container can be easily transported with crane and lift trucks. For the purpose of crane transportation the container has crane holders at the edges.

MAX Rebar Cutter WMC 80, 3 to 8 mm

The rebar mesh cutter for easy cutting of Ø 3–8 mm. Double cutting capacity: 3 × 3 to 6 × 6 mm. Scope of delivery: Robust plastic carrying case, without battery and without charger.

Diboflex pipe transit with flange

Die Diboflex Rohrdurchführung zum Anschluss von Bitumen Dichtbahnen ist eine einbetonierbare Rohrdurchführung für den Generaleinsatz im Hoch- und TiefBau. Durch den integrierten und fest verbundenen Bitumenflansch können die Bitumenbahnen direkt verschweißt werden. Geeignet im Hochbau für Bodenplatte, Keller, Außenwand und Dach. Diese Vereinheitlichung erlaubt Teilereduktion und Fehlerminimierung beim Einbau bzw. bei der Abdichtung.<?xml:namespace prefix="o" /> Vorteile die überzeugen: Universell einsetzbare Rohrdurchführung mit integriertem Bitumen-Ring Standardisierung: eine einzige Lösung für Bodenplatte/Keller-Außenwand/Dach Flexibilität, Teile-Reduktion & Vereinfachung des Montage-Ablaufs Spacer aus Polystyrol (EPS) als Platzhalter beim Einbetonieren für Anschlussrohre Integration von handelsüblichen Dichtelementen/RDS-Systemen möglich Einsetzbar als Dampfsperre im Dachbereich Kostengünstige Gesamtlösung DRUCK-geprüft (1 bar) RADON-geprüft Die Rohrdurchführung bietet höchste Dichtheit, weil Sie einbetoniert wird und direkt mit den Bitumenbahnen verschweißbar ist. Bei Keller-Außenwänden sind auch verschiedene Bitumen-Dickanstriche (1K / 2K) verwendbar. Im Einbauprozess einer herkömmlichen Rohrdurchführung ergeben sich erhebliche Kosteneinsparungen durch die Diboflex.

Diboflex pipe transit with flange

Die Diboflex Rohrdurchführung zum Anschluss von Bitumen Dichtbahnen ist eine einbetonierbare Rohrdurchführung für den Generaleinsatz im Hoch- und TiefBau. Durch den integrierten und fest verbundenen Bitumenflansch können die Bitumenbahnen direkt verschweißt werden. Geeignet im Hochbau für Bodenplatte, Keller, Außenwand und Dach. Diese Vereinheitlichung erlaubt Teilereduktion und Fehlerminimierung beim Einbau bzw. bei der Abdichtung.<?xml:namespace prefix="o" /> Vorteile die überzeugen: Universell einsetzbare Rohrdurchführung mit integriertem Bitumen-Ring Standardisierung: eine einzige Lösung für Bodenplatte/Keller-Außenwand/Dach Flexibilität, Teile-Reduktion & Vereinfachung des Montage-Ablaufs Spacer aus Polystyrol (EPS) als Platzhalter beim Einbetonieren für Anschlussrohre Integration von handelsüblichen Dichtelementen/RDS-Systemen möglich Einsetzbar als Dampfsperre im Dachbereich Kostengünstige Gesamtlösung DRUCK-geprüft (1 bar) RADON-geprüft Die Rohrdurchführung bietet höchste Dichtheit, weil Sie einbetoniert wird und direkt mit den Bitumenbahnen verschweißbar ist. Bei Keller-Außenwänden sind auch verschiedene Bitumen-Dickanstriche (1K / 2K) verwendbar. Im Einbauprozess einer herkömmlichen Rohrdurchführung ergeben sich erhebliche Kosteneinsparungen durch die Diboflex.

Shuttering element ABS - profiled for joint seal

Shuttering element for joint seal sheet (VIBAFlex, VIBA Sinterflex, etc.), suitable for construction joints in walls in accordance with DIN EN 1992-1-1/NA. The sealing is made by the waterstop seal sheet. The formwork consists of a stable, fine-meshed expanded metal, which, in the keyed version, is profiled in accordance with DIN EN 1992-1-1/NA. The elements feature a slot for accommodating the waterstop sheet to be installed on site.

This website uses cookies to ensure the best experience possible. More information...