Properties

Eisen ø:	3 - 8 mm
Gewicht / Stk:	2,8 kg
package:	Hartschalenkoffer

MAX Rebar Cutter WMC 80, 3 to 8 mm

Product number: 56BMWMC80

Stk

Description

The rebar mesh cutter for easy cutting of Ø 3–8 mm. Double cutting capacity: 3 × 3 to 6 × 6 mm.

Scope of delivery: Robust plastic carrying case, without battery and without charger.

Properties

Eisen ø:	3 - 8 mm
Gewicht / Stk:	2,8 kg
package:	Hartschalenkoffer

Downloads "MAX Rebar Cutter WMC 80, 3 to 8 mm"

Download Datenblatt_56BMWMC8_MAXSchneider-6892

Customers also viewed

MAX Wire tying machine battery - RB 611T Ø 20 - 61 mm

Scope of delivery: Robust plastic case, charger, 2 pcs. Lithium-ion batteries and 2 rolls of TJEP wire. 5000 ties per charge. 10-step adjustment of the binding strength. 2 rotating motor without carbon brushes 240 ties per roll of wire 1.00 mm Ergonomic handle Double wire windings Higher strength, stronger stable bonds Easy insertion of the wire

Kantenreiniger für Schalungsplatten

Handgerät für die einfache Reinigung von Kanten von Schaltafel von 12 - 27 mm.

MAX Rebar Tying Tool - RB 443T Ø 20mm - 44 mm

MAX Rebar Trying Tool - RB 443T Ø 20 - 44 mm. The new generation of Re-Bar tying machine up to 20mm x 25mm with 1.0 mm wire. Advantages: 0.5 sec/tie which is 30% faster than RB441T. 5000 ties per charge 65 minutes full charge (50 minutes 80%) Scope of delivery: Battery JPL91450A ( 2 pcs.) Charging station JC925A Plastic case Applications: Precast Plants Foundations Road and Bridge Floor decking Floor heating Building floor

ZZ Reinforcement Spacer – Impact Resistant

Impact-resistant, step- and tip-proof spacer for lower reinforcement. Prevents void formation and is fully encapsulated by concrete during pouring. Thanks to its special geometry, linear interruption of the concrete structure is avoided, ensuring structural continuity. Standard length: 200 cm

ZZ-batten

Skidproofed and tilt secured spacer for the bottom reinforcement. There will be no shrinking as the concrete encloses the batten completly. Due to the special form a linear interruption can be avoided. Mill lenghts 200 cm. Other lenghts available.

Innenrüttler Ø 38 mm Profi IR

Heavy-duty work on construction sides requires top quality reliable Concrete-vibrators. Thy have to be resistant against water and dirt and should be maintenance-free. Our vibrators IR-36T - IR-65T fulfils this demand. They can be connected to all standard high-frequency cnverters. Three bearings, a hardened needle-head and tube as well as thermic protection of the motor guarantees best performance and powerful vibration for many years. Article-Nr. Type Ømm Tube-length Connection-cable SphereØ cm Compression 3/h Power-consumption kg 59AV49 IR 36T 36 5 m 15 m 40 up to 16 6 A 11,0 59AV50 IR 50T 50 5 m 15 m 70 up to 25 11 A 15,0 59AV58 IR 60T 60 5 m 15 m 95 up to 30 18 A 17,0 59AV65 IR 65T 65 5 m 15 m 110 up to 35 23 A 19,0

PAE-Construction foil

Other widths and strengths on request. Rated strength less usual tolerance.

Formwork stop GFK conrete grey

Formwork stop made of fibreglass. Pins Ø: 10 mm; Length: 100 mm ADVANTAGES: Non-corrosive High strength and stable Chemical resistance Fast and easy installation INSTALLATION: Mark the position of the formwork with a snap line. Drill periodically holes with a diameter of 10mm along the marking. ATTENTION: Please consider the length of the pins.

Rundfix S 4-12/40 mm

PVC-freier Abstandhalter Rundfix in schwerer Ausführung für senkrechte Bewehrung.

Iron cutter MU 16 battery 18V / 5.0 Ah

Iron cutter Procut 12 Elektric Code 1298 cutting power max. ø 16 mm weight 9,0 kg hydraulic power 14t / 560 bar capacity 2,6 AH voltage 18 V dimensions 490x395x135 mm