Skip to main content Skip to search Skip to main navigation Skip to B2B platform navigation
Filter products
Variants

With the help of our variant list you can find your article faster and easier.

Product Nr.
Product
barrel
Price
Action
52BMC
Betontrennmittel VIBA-Trenn RAPID
Container
52BMF
Betontrennmittel VIBA-Trenn RAPID
Faß
52BMK
Betontrennmittel VIBA-Trenn RAPID
Kanister
Skip product gallery

Zubehör

High-power injector 10 lt. oil-resistant

for fast coating of surfaces (formwork boards, etc.) metal housing

Skip product gallery

Ähnliche Artikel

Formwork oil Prägnit ST300

Tested formwork oil suitable for all formworks. Good degradable with certificate Mixture of mineral oil and plant-based oil Apply a thin layer for best effect with protection of the formwork. No cleaning of the formwork neccessary.  Degredable for 81% within 21 days.

Skip product gallery

Customers also viewed

KG-tube implementation

MPA geprüft! Die KG-Rohrdurchführungen werden in den Durchmessern DN 100 bis DN 200 gefertigt. Alle gängigen Wandstärken von 200 bis 400 mm sind einbaufertig als Doppelmuffenrohr sofort aus Lagervorrat lieferbar. Die Rohrdurchführung ist werkseitig mittig mit einem Mauerkragen versehen, der verhindert, dass Feuchtigkeit ins Bauwerk eindringen kann. Die Rohrdurchführungen eignen sich für den Beton- und Mauerwerksbau. Die druckwasserdichten Hauseinführungen haben eine hohe Witterungs- und Ozonbeständigkeit, sowie eine gute Säure- und Laugenbeständigkeit. Sie können in Bereichen von -30°C bis +100° C eingesetzt werden. Lieferung:Die KG-Rohrdurchführung wird auf Wandstärke gefertigt geliefert.Pro Rohrdurchführung sind zwei Dichtungen und zwei Schalungs- bzw. Verschlussdeckel im Lieferumfang enthalten.Montage KG-Muffenstopfen an die Wandschalung nageln Dichtung in die Rohrdurchführung einlegen. Rohrdurchführung auf den Muffenstopfen schieben. Die zweite Seite der Rohrdurchführung mit dem Stopfen verschließen und mit einem von aussen durch die Schalung geschlagenen Nagel fixieren

Kreuzklemmen für Erdungsband / - draht Kombination verzinkt

Cross clamps in different designs for grounding strap / wire combination

Sylomer-Polyurethanlager SR 450

Sylomer impact sound bearing SR 450 Area of application Pressure load Deformation Form factor dependent, the specified values apply to form factor q = 3 Static area of application(static loads) up to 0,45 N/mm² approx. 10 % Dynamic area of application(static and dynamic loads) up to 0,70 N/mm² approx. 20% Peak loads(rare, short-term loads) up to 5,0 N/mm² approx. 60%          

Kunststoff-Futterrohr WELLO mit Quellband

WELLO, the lining tube made of PE with an all-round swelling coating. The tube is smooth inside. The undulating outside clings to the concrete. Two swelling tapes applied around the center also prevent water from entering the structure Wello casing, double security through corrugation and swelling tape, sealing by means of an annular seal. Tested up to 30m water column.

KG-tube implementation

MPA geprüft! Die KG-Rohrdurchführungen werden in den Durchmessern DN 100 bis DN 200 gefertigt. Alle gängigen Wandstärken von 200 bis 400 mm sind einbaufertig als Doppelmuffenrohr sofort aus Lagervorrat lieferbar. Die Rohrdurchführung ist werkseitig mittig mit einem Mauerkragen versehen, der verhindert, dass Feuchtigkeit ins Bauwerk eindringen kann. Die Rohrdurchführungen eignen sich für den Beton- und Mauerwerksbau. Die druckwasserdichten Hauseinführungen haben eine hohe Witterungs- und Ozonbeständigkeit, sowie eine gute Säure- und Laugenbeständigkeit. Sie können in Bereichen von -30°C bis +100° C eingesetzt werden. Lieferung:Die KG-Rohrdurchführung wird auf Wandstärke gefertigt geliefert.Pro Rohrdurchführung sind zwei Dichtungen und zwei Schalungs- bzw. Verschlussdeckel im Lieferumfang enthalten.Montage KG-Muffenstopfen an die Wandschalung nageln Dichtung in die Rohrdurchführung einlegen. Rohrdurchführung auf den Muffenstopfen schieben. Die zweite Seite der Rohrdurchführung mit dem Stopfen verschließen und mit einem von aussen durch die Schalung geschlagenen Nagel fixieren

Exposed concrete plugs for pressure cone

The high-quality exposed concrete cones are bonded, with contact adhesive X1, in the remaining opening after removing the pressure cones. Apply the contact adhesive on the backside to obtain a clean visible area.  

Kunststoff-Futterrohr WELLO mit Quellband

WELLO, the lining tube made of PE with an all-round swelling coating. The tube is smooth inside. The undulating outside clings to the concrete. Two swelling tapes applied around the center also prevent water from entering the structure Wello casing, double security through corrugation and swelling tape, sealing by means of an annular seal. Tested up to 30m water column.

Trapezoidal strip wood

Trapezoidal strip made of wood. Other dimensions on request.

Kunststoff-Futterrohr WELLO mit Quellband

WELLO, the lining tube made of PE with an all-round swelling coating. The tube is smooth inside. The undulating outside clings to the concrete. Two swelling tapes applied around the center also prevent water from entering the structure Wello casing, double security through corrugation and swelling tape, sealing by means of an annular seal. Tested up to 30m water column.

Sylomer-Polyurethanlager SR 450

Sylomer impact sound bearing SR 450 Area of application Pressure load Deformation Form factor dependent, the specified values apply to form factor q = 3 Static area of application(static loads) up to 0,45 N/mm² approx. 10 % Dynamic area of application(static and dynamic loads) up to 0,70 N/mm² approx. 20% Peak loads(rare, short-term loads) up to 5,0 N/mm² approx. 60%