Properties
| Breite in mm: | 150 mm |
|---|---|
| Länge in mm: | 2000 mm |
VIBA-Proofflex – Premium Steel Waterstop 150 mm with Double-Sided Bonding Coating
Available, delivery time: 1-3 days
Price on request
Properties
| Breite in mm: | 150 mm |
|---|---|
| Länge in mm: | 2000 mm |
Ähnliche Artikel
Our VIBA Sinterflex waterstop sheet is coated on both sides with a patented “active” special coating. This coating is non-sticky and does not require any protective film to be removed before concreting. The coating bonds with the concrete through a natural reaction with the surrounding concrete, thereby actively sealing the joint to be waterproofed. The joint is actively sintered by the special coating and therefore becomes increasingly dense over time. This process is referred to as active sintering or active mineralizing deep sealing. The unique bond between the active VIBA Sinterflex special coating and fresh concrete reliably prevents water from migrating around the VIBA Sinterflex waterstop system. For secure sealing, a concrete embedment of only 3 cm is sufficient. VIBA Sinterflex is water-reactive and therefore actively seals construction joints and designed crack joints through a natural concrete-technology process. Water pressures up to and including 5 bar = 50 m water column can be safely sealed.
Customers also viewed
Chamfer strip made of impact-resistant material to breack edges and also as decoration by extensive exposed-concrete parts. Fixing at an interval of 10-15 cm with nail holes.
Shuttering element for joint seal sheet (VIBAFlex, VIBA Sinterflex, etc.), suitable for construction joints in walls in accordance with DIN EN 1992-1-1/NA. The sealing is made by the waterstop seal sheet. The formwork consists of a stable, fine-meshed expanded metal, which, in the keyed version, is profiled in accordance with DIN EN 1992-1-1/NA. The elements feature a slot for accommodating the waterstop sheet to be installed on site.
WELLO, the lining tube made of PE with an all-round swelling coating. The tube is smooth inside. The undulating outside clings to the concrete. Two swelling tapes applied around the center also prevent water from entering the structure Wello casing, double security through corrugation and swelling tape, sealing by means of an annular seal. Tested up to 30m water column.
Upturn beam element made of wave-profiled perforated metal plate in order to set on edge in the area of the bottom plate. Including a integrated water bar or joint plate holder.Element length: 2500 mm (standard)
Our VIBA Sinterflex waterstop sheet is coated on both sides with a patented “active” special coating. This coating is non-sticky and does not require any protective film to be removed before concreting. The coating bonds with the concrete through a natural reaction with the surrounding concrete, thereby actively sealing the joint to be waterproofed. The joint is actively sintered by the special coating and therefore becomes increasingly dense over time. This process is referred to as active sintering or active mineralizing deep sealing. The unique bond between the active VIBA Sinterflex special coating and fresh concrete reliably prevents water from migrating around the VIBA Sinterflex waterstop system. For secure sealing, a concrete embedment of only 3 cm is sufficient. VIBA Sinterflex is water-reactive and therefore actively seals construction joints and designed crack joints through a natural concrete-technology process. Water pressures up to and including 5 bar = 50 m water column can be safely sealed.
Stop end panel made of a wave-profiled perforated metal plate in order to set a stop end in the wall or in the bottom plate.
Stop end panel made of a wave-profiled perforated metal plate in order to set a stop end in the wall or in the bottom plate.
• Can be set up individually or in a group at any angle. • Since no concrete feet are required, the barrier can be used without any problems. • Particularly suitable for short-term barriers in civil engineering. • Ideal for events etc.
Easy storage of 25 or 30 fields and feet Ideal for rental at events and on construction sites Can be transported by forklift or crane
More Safety through EN 1870-1 Saw incl. 1 HM saw blade (nailed down) Standard equipment: Safety hood – table extansion adjustable angle cutting device undertable guideway, securely protected Parallel stop with measuring scale high quality TCT sawblade machine frame completely galvanized, torsion - resistant powerful motors with extensive reserves of safety, with magnetic brake 4 loading – unloading devices Technical Data: Motor power output P2** KW 3 Three – phase current Volt 400 Frequency Hz 50 Sawblade dia. / bor hole mm 450/30 Cuttung height mm 135 Table size L x W mm 1079 x 750 Table height mm 850 Weight kg 113