Go to homepage
Catalogue
Wishlist
Request Basket
Skip image gallery

Properties

ø in mm: 110 mm

Mauerkragen aus TPE - Themoplastischem Elastomer

Product number: 61LXMK110
ø in mm

Price on request

Stk

Description

MPA certificated!

Masonry collars from TPE-Themoplastic Elastomer

Application area:
The sealing collar is used whenever a water-tight lead-through of pipe lines through foundation slabs, walls, and masonry is required.

The sealing collar, which has passed the pressure test at 5 bar, prevents moisture from getting into the building along the outer pipe walls.

Tested for impermeability up to 50 m water column.

Properties:
The sealing collar is supplied in pre-assembled condition with 2 stainless steel straps.

The circular, 4 cm wide collar, which is equipped with additional waterstops, prevents liquids from getting into the building.

Small waterstops inside the collar ensure water-tightness up to a water column of 50 m after tightening of the stainless steel fastening straps.
Assembly

  • clean pipe surface if necessary
  • slide on the sealing collar and fix it in the centre of the concrete/wall
  • tighten the fastening straps

Properties

ø in mm: 110 mm
Filter products
Variants

With the help of our variant list you can find your article faster and easier.

Product Nr.
Product
ø in mm
Price
Action
61LXMK025
 Mauerkragen aus TPE - Themoplastischem Elastomer
25 mm
61LXMK032
 Mauerkragen aus TPE - Themoplastischem Elastomer
32 mm
61LXMK040
 Mauerkragen aus TPE - Themoplastischem Elastomer
40 mm
61LXMK050
 Mauerkragen aus TPE - Themoplastischem Elastomer
50 mm
61LXMK063
 Mauerkragen aus TPE - Themoplastischem Elastomer
63 mm
61LXMK075
 Mauerkragen aus TPE - Themoplastischem Elastomer
75 mm
61LXMK090
 Mauerkragen aus TPE - Themoplastischem Elastomer
90 mm
61LXMK110
 Mauerkragen aus TPE - Themoplastischem Elastomer
110 mm
61LXMK125
 Mauerkragen aus TPE - Themoplastischem Elastomer
125 mm
61LXMK140
 Mauerkragen aus TPE - Themoplastischem Elastomer
140 mm
Skip product gallery

Customers also viewed

Abstandrohre mit aufgerauter Oberfläche von Ø 20mm bis Ø 40mm in Bunden. Standardlänge ist 2,0 Meter.
Spacer tubes with a roughened surface
Spacer tubes with a roughened surface from Ø 20mm to Ø 40 mm in bundlesØ 20mm to Ø 22mm 100 running meters per bundleØ 26mm to Ø 32mm 50 running meters per bundleØ 40mm 30 running meters per bundle
Wassernase
Wassernase
Rainfall drips off at the drip edge without hitting the underside of the surface or the vertical wall.
Formwork oil Prägnit ST300
Formwork oil Prägnit ST300
Tested formwork oil suitable for all formworks. Good degradable with certificate Mixture of mineral oil and plant-based oil Apply a thin layer for best effect with protection of the formwork. No cleaning of the formwork neccessary.  Degredable for 81% within 21 days.
Noppenfolie T8
Noppenfolie T8
Sturdy and durable protection against mechanical damage. Creates an air layer in front of the existing masonry with pimples (10 mm). The basemant walls can breath and moisture isn'T stuck within the construction. Material: HDPE, Fire behavior: B2 DIN 4102.
Abstandrohre mit aufgerauter Oberfläche von Ø 20mm bis Ø 40mm in Bunden. Standardlänge ist 2,0 Meter.
Spacer tubes with a roughened surface
Spacer tubes with a roughened surface from Ø 20mm to Ø 40 mm in bundlesØ 20mm to Ø 22mm 100 running meters per bundleØ 26mm to Ø 32mm 50 running meters per bundleØ 40mm 30 running meters per bundle
Speedies Bar Spacer 20 mm
Speedies Bar Spacer 20 mm
Application: For concreting floors or concrete slabs as spacers of the lower preservation. Furthermore, the Speedies surface spacers can also be used very well in the concrete precast plant due to the pointed feet. Your advantage: Material polypropylene PP Pressure resistant / Very high stability Ergonomic Transport optimized (europallet) Consumption approx. 1-1,5 pcs./m² Product is patent pending MPA-tested
Noppenfolie T8
Noppenfolie T8
Sturdy and durable protection against mechanical damage. Creates an air layer in front of the existing masonry with pimples (10 mm). The basemant walls can breath and moisture isn'T stuck within the construction. Material: HDPE, Fire behavior: B2 DIN 4102.
Mauerkragen aus TPE - Themoplastischem Elastomer
Mauerkragen aus TPE - Themoplastischem Elastomer
MPA certificated! Masonry collars from TPE-Themoplastic Elastomer Application area:The sealing collar is used whenever a water-tight lead-through of pipe lines through foundation slabs, walls, and masonry is required. The sealing collar, which has passed the pressure test at 5 bar, prevents moisture from getting into the building along the outer pipe walls. Tested for impermeability up to 50 m water column. Properties:The sealing collar is supplied in pre-assembled condition with 2 stainless steel straps. The circular, 4 cm wide collar, which is equipped with additional waterstops, prevents liquids from getting into the building. Small waterstops inside the collar ensure water-tightness up to a water column of 50 m after tightening of the stainless steel fastening straps.Assembly clean pipe surface if necessary slide on the sealing collar and fix it in the centre of the concrete/wall tighten the fastening straps
Wassernase
Wassernase
Rainfall drips off at the drip edge without hitting the underside of the surface or the vertical wall.
Exposed concrete plugs for pressure cone
Exposed concrete plugs for pressure cone
The high-quality exposed concrete cones are bonded, with contact adhesive X1, in the remaining opening after removing the pressure cones. Apply the contact adhesive on the backside to obtain a clean visible area.  
This website uses cookies to ensure the best experience possible. More information...