Go to homepage
Catalogue
Wishlist
Request Basket
Skip image gallery

Properties

ø in mm: 170 mm

Mauerkragen aus TPE - Themoplastischem Elastomer

Product number: 61LXMK170

Available on request

ø in mm

Price on request

Stk

Description

MPA certificated!

Masonry collars from TPE-Themoplastic Elastomer

Application area:
The sealing collar is used whenever a water-tight lead-through of pipe lines through foundation slabs, walls, and masonry is required.

The sealing collar, which has passed the pressure test at 5 bar, prevents moisture from getting into the building along the outer pipe walls.

Tested for impermeability up to 50 m water column.

Properties:
The sealing collar is supplied in pre-assembled condition with 2 stainless steel straps.

The circular, 4 cm wide collar, which is equipped with additional waterstops, prevents liquids from getting into the building.

Small waterstops inside the collar ensure water-tightness up to a water column of 50 m after tightening of the stainless steel fastening straps.
Assembly

  • clean pipe surface if necessary
  • slide on the sealing collar and fix it in the centre of the concrete/wall
  • tighten the fastening straps

Properties

ø in mm: 170 mm
Downloads "Mauerkragen aus TPE - Themoplastischem Elastomer"
Filter products
Variants

With the help of our variant list you can find your article faster and easier.

Product Nr.
Product
ø in mm
Price
Action
61LXMK025
 Mauerkragen aus TPE - Themoplastischem Elastomer
25 mm
61LXMK032
 Mauerkragen aus TPE - Themoplastischem Elastomer
32 mm
61LXMK063
 Mauerkragen aus TPE - Themoplastischem Elastomer
63 mm
61LXMK075
 Mauerkragen aus TPE - Themoplastischem Elastomer
75 mm
61LXMK090
 Mauerkragen aus TPE - Themoplastischem Elastomer
90 mm
61LXMK125
 Mauerkragen aus TPE - Themoplastischem Elastomer
125 mm
61LXMK140
 Mauerkragen aus TPE - Themoplastischem Elastomer
140 mm
61LXMK170
 Mauerkragen aus TPE - Themoplastischem Elastomer
170 mm
61LXMK180
 Mauerkragen aus TPE - Themoplastischem Elastomer
180 mm
61LXMK225
 Mauerkragen aus TPE - Themoplastischem Elastomer
225 mm
Skip product gallery

Customers also viewed

Mauerkragen aus TPE - Themoplastischem Elastomer
Mauerkragen aus TPE - Themoplastischem Elastomer
MPA certificated! Masonry collars from TPE-Themoplastic Elastomer Application area:The sealing collar is used whenever a water-tight lead-through of pipe lines through foundation slabs, walls, and masonry is required. The sealing collar, which has passed the pressure test at 5 bar, prevents moisture from getting into the building along the outer pipe walls. Tested for impermeability up to 50 m water column. Properties:The sealing collar is supplied in pre-assembled condition with 2 stainless steel straps. The circular, 4 cm wide collar, which is equipped with additional waterstops, prevents liquids from getting into the building. Small waterstops inside the collar ensure water-tightness up to a water column of 50 m after tightening of the stainless steel fastening straps.Assembly clean pipe surface if necessary slide on the sealing collar and fix it in the centre of the concrete/wall tighten the fastening straps
Mauerkragen aus TPE - Themoplastischem Elastomer
Mauerkragen aus TPE - Themoplastischem Elastomer
MPA certificated! Masonry collars from TPE-Themoplastic Elastomer Application area:The sealing collar is used whenever a water-tight lead-through of pipe lines through foundation slabs, walls, and masonry is required. The sealing collar, which has passed the pressure test at 5 bar, prevents moisture from getting into the building along the outer pipe walls. Tested for impermeability up to 50 m water column. Properties:The sealing collar is supplied in pre-assembled condition with 2 stainless steel straps. The circular, 4 cm wide collar, which is equipped with additional waterstops, prevents liquids from getting into the building. Small waterstops inside the collar ensure water-tightness up to a water column of 50 m after tightening of the stainless steel fastening straps.Assembly clean pipe surface if necessary slide on the sealing collar and fix it in the centre of the concrete/wall tighten the fastening straps
Mauerkragen aus TPE - Themoplastischem Elastomer
Mauerkragen aus TPE - Themoplastischem Elastomer
MPA certificated! Masonry collars from TPE-Themoplastic Elastomer Application area:The sealing collar is used whenever a water-tight lead-through of pipe lines through foundation slabs, walls, and masonry is required. The sealing collar, which has passed the pressure test at 5 bar, prevents moisture from getting into the building along the outer pipe walls. Tested for impermeability up to 50 m water column. Properties:The sealing collar is supplied in pre-assembled condition with 2 stainless steel straps. The circular, 4 cm wide collar, which is equipped with additional waterstops, prevents liquids from getting into the building. Small waterstops inside the collar ensure water-tightness up to a water column of 50 m after tightening of the stainless steel fastening straps.Assembly clean pipe surface if necessary slide on the sealing collar and fix it in the centre of the concrete/wall tighten the fastening straps
Abstandrohre mit aufgerauter Oberfläche von Ø 20mm bis Ø 40mm in Bunden. Standardlänge ist 2,0 Meter.
Spacer tubes with a roughened surface
Spacer tubes with a roughened surface from Ø 20mm to Ø 40 mm in bundlesØ 20mm to Ø 22mm 100 running meters per bundleØ 26mm to Ø 32mm 50 running meters per bundleØ 40mm 30 running meters per bundle
Vitzthum - concrete form TUBE PLUS
Vitzthum - concrete form TUBE PLUS
Concrete form Tube Plus guarantees smooth surface. Other lengths on request!
Universal-scrapers 300 mm
Universal-scrapers 300 mm
Width: 300 mm Height: 160 mm with shaft
KG 2000 - Rohrdurchführung
KG 2000 - Rohrdurchführung
KG 2000 double socket pipes with water stop Other wall thicknesses 300 - 500 mm available on request.The pipe diameters 100, 125, 150 and 200 mm are delivered with 2 covers.Pipe diameters of 200 and 300 mm are delivered without a cover.
Mauerkragen aus TPE - Themoplastischem Elastomer
Mauerkragen aus TPE - Themoplastischem Elastomer
MPA certificated! Masonry collars from TPE-Themoplastic Elastomer Application area:The sealing collar is used whenever a water-tight lead-through of pipe lines through foundation slabs, walls, and masonry is required. The sealing collar, which has passed the pressure test at 5 bar, prevents moisture from getting into the building along the outer pipe walls. Tested for impermeability up to 50 m water column. Properties:The sealing collar is supplied in pre-assembled condition with 2 stainless steel straps. The circular, 4 cm wide collar, which is equipped with additional waterstops, prevents liquids from getting into the building. Small waterstops inside the collar ensure water-tightness up to a water column of 50 m after tightening of the stainless steel fastening straps.Assembly clean pipe surface if necessary slide on the sealing collar and fix it in the centre of the concrete/wall tighten the fastening straps
Knock-in anchor D&W Ø 15mm
Knock-in anchor D&W Ø 15mm
With internal thread for Ø 15 mm Dywidag tension rod Borehole Ø 22 mm borehole depth 95 mm Permissible load capacity min. 17.0 kN with a minimum concrete strength of 15N / mm²
KG-tube implementation
KG-tube implementation
MPA geprüft! Die KG-Rohrdurchführungen werden in den Durchmessern DN 100 bis DN 200 gefertigt. Alle gängigen Wandstärken von 200 bis 400 mm sind einbaufertig als Doppelmuffenrohr sofort aus Lagervorrat lieferbar. Die Rohrdurchführung ist werkseitig mittig mit einem Mauerkragen versehen, der verhindert, dass Feuchtigkeit ins Bauwerk eindringen kann. Die Rohrdurchführungen eignen sich für den Beton- und Mauerwerksbau. Die druckwasserdichten Hauseinführungen haben eine hohe Witterungs- und Ozonbeständigkeit, sowie eine gute Säure- und Laugenbeständigkeit. Sie können in Bereichen von -30°C bis +100° C eingesetzt werden. Lieferung:Die KG-Rohrdurchführung wird auf Wandstärke gefertigt geliefert.Pro Rohrdurchführung sind zwei Dichtungen und zwei Schalungs- bzw. Verschlussdeckel im Lieferumfang enthalten.Montage KG-Muffenstopfen an die Wandschalung nageln Dichtung in die Rohrdurchführung einlegen. Rohrdurchführung auf den Muffenstopfen schieben. Die zweite Seite der Rohrdurchführung mit dem Stopfen verschließen und mit einem von aussen durch die Schalung geschlagenen Nagel fixieren
This website uses cookies to ensure the best experience possible. More information...