Go to homepage
Catalogue
Wishlist
Request Basket
Categories
Skip image gallery
Mauerkragen aus TPE - Themoplastischem Elastomer
Mauerkragen aus TPE - Themoplastischem Elastomer
Mauerkragen aus TPE - Themoplastischem Elastomer

Properties

ø in mm: 400 mm

Mauerkragen aus TPE - Themoplastischem Elastomer

Product number: 61LXMK400

Available, delivery time: 1-3 days

ø in mm

Price on request

Stk

Description

MPA certificated!

Masonry collars from TPE-Themoplastic Elastomer

Application area:
The sealing collar is used whenever a water-tight lead-through of pipe lines through foundation slabs, walls, and masonry is required.

The sealing collar, which has passed the pressure test at 5 bar, prevents moisture from getting into the building along the outer pipe walls.

Tested for impermeability up to 50 m water column.

Properties:
The sealing collar is supplied in pre-assembled condition with 2 stainless steel straps.

The circular, 4 cm wide collar, which is equipped with additional waterstops, prevents liquids from getting into the building.

Small waterstops inside the collar ensure water-tightness up to a water column of 50 m after tightening of the stainless steel fastening straps.
Assembly

  • clean pipe surface if necessary
  • slide on the sealing collar and fix it in the centre of the concrete/wall
  • tighten the fastening straps

Properties

ø in mm: 400 mm
Downloads "Mauerkragen aus TPE - Themoplastischem Elastomer"
Filter products
Variants

With the help of our variant list you can find your article faster and easier.

Product Nr.
Product
ø in mm
Price
Action
61LXMK025
 Mauerkragen aus TPE - Themoplastischem Elastomer
25 mm
61LXMK032
 Mauerkragen aus TPE - Themoplastischem Elastomer
32 mm
61LXMK063
 Mauerkragen aus TPE - Themoplastischem Elastomer
63 mm
61LXMK075
 Mauerkragen aus TPE - Themoplastischem Elastomer
75 mm
61LXMK090
 Mauerkragen aus TPE - Themoplastischem Elastomer
90 mm
61LXMK125
 Mauerkragen aus TPE - Themoplastischem Elastomer
125 mm
61LXMK140
 Mauerkragen aus TPE - Themoplastischem Elastomer
140 mm
61LXMK170
 Mauerkragen aus TPE - Themoplastischem Elastomer
170 mm
61LXMK180
 Mauerkragen aus TPE - Themoplastischem Elastomer
180 mm
61LXMK225
 Mauerkragen aus TPE - Themoplastischem Elastomer
225 mm
61LXMK250
 Mauerkragen aus TPE - Themoplastischem Elastomer
250 mm
61LXMK315
 Mauerkragen aus TPE - Themoplastischem Elastomer
315 mm
61LXMK400
 Mauerkragen aus TPE - Themoplastischem Elastomer
400 mm
61LXMK500
 Mauerkragen aus TPE - Themoplastischem Elastomer
500 mm
61LXMK200
 Mauerkragen aus TPE - Themoplastischem Elastomer
200 mm
61LXMK160
 Mauerkragen aus TPE - Themoplastischem Elastomer
160 mm
61LXMK040
 Mauerkragen aus TPE - Themoplastischem Elastomer
40 mm
61LXMK050
 Mauerkragen aus TPE - Themoplastischem Elastomer
50 mm
61LXMK110
 Mauerkragen aus TPE - Themoplastischem Elastomer
110 mm
Skip product gallery

Customers also viewed

Mauerkragen aus TPE - Themoplastischem Elastomer

MPA certificated! Masonry collars from TPE-Themoplastic Elastomer Application area:The sealing collar is used whenever a water-tight lead-through of pipe lines through foundation slabs, walls, and masonry is required. The sealing collar, which has passed the pressure test at 5 bar, prevents moisture from getting into the building along the outer pipe walls. Tested for impermeability up to 50 m water column. Properties:The sealing collar is supplied in pre-assembled condition with 2 stainless steel straps. The circular, 4 cm wide collar, which is equipped with additional waterstops, prevents liquids from getting into the building. Small waterstops inside the collar ensure water-tightness up to a water column of 50 m after tightening of the stainless steel fastening straps.Assembly clean pipe surface if necessary slide on the sealing collar and fix it in the centre of the concrete/wall tighten the fastening straps

Spacer Speedies floor

Application: For concreting floors or concrete slabs as spacers of the lower preservation. Furthermore, the Speedies surface spacers can also be used very well in the concrete precast plant due to the pointed feet. Your advantage: Material polypropylene PP Pressure resistant / Very high stability Ergonomic Transport optimized (europallet) Consumption approx. 1-1,5 pcs./m² Product is patent pending MPA-tested

Kunststoffverschlussdeckel für Futterrohr

Sealing cap + formwork aid for WELLO and FASO lining tube reusable

Formwork oil Prägnit ST300

Tested formwork oil suitable for all formworks. Good degradable with certificate Mixture of mineral oil and plant-based oil Apply a thin layer for best effect with protection of the formwork. No cleaning of the formwork neccessary.  Degredable for 81% within 21 days.

De-icing chemical SNO-N-ICE

De-icing agent: Sno N Ice is an alternative to conventional road salt for use on concrete surfaces. An additive reliably prevents concrete from spalling and surface scaling (dusting).

Steel-Duofix

Robust mash connector made of steel of 5 mm diameter including two sputtered plastic clamps. Keeps the distance between the mashes as well as the distance between the meshes and the formwork. Other concrete cover on request!

Ringraumdichtung P-Cable Basic HRD 80

The P-Cable Basic HRD annular seal is available in various designs.The following product identification is used: SG x (number of holes) / y-z (area in which the hole can be adjusted)

KG-tube implementation

MPA geprüft! Die KG-Rohrdurchführungen werden in den Durchmessern DN 100 bis DN 200 gefertigt. Alle gängigen Wandstärken von 200 bis 400 mm sind einbaufertig als Doppelmuffenrohr sofort aus Lagervorrat lieferbar. Die Rohrdurchführung ist werkseitig mittig mit einem Mauerkragen versehen, der verhindert, dass Feuchtigkeit ins Bauwerk eindringen kann. Die Rohrdurchführungen eignen sich für den Beton- und Mauerwerksbau. Die druckwasserdichten Hauseinführungen haben eine hohe Witterungs- und Ozonbeständigkeit, sowie eine gute Säure- und Laugenbeständigkeit. Sie können in Bereichen von -30°C bis +100° C eingesetzt werden. Lieferung:Die KG-Rohrdurchführung wird auf Wandstärke gefertigt geliefert.Pro Rohrdurchführung sind zwei Dichtungen und zwei Schalungs- bzw. Verschlussdeckel im Lieferumfang enthalten.Montage KG-Muffenstopfen an die Wandschalung nageln Dichtung in die Rohrdurchführung einlegen. Rohrdurchführung auf den Muffenstopfen schieben. Die zweite Seite der Rohrdurchführung mit dem Stopfen verschließen und mit einem von aussen durch die Schalung geschlagenen Nagel fixieren

Ringraumdichtung P-Cable Basic HRD Ø100

The P-Cable Basic HRD annular seal is available in various designs.The following product identification is used: SG x (number of holes) / y-z (area in which the hole can be adjusted)

Construction-compensated foil

Compensated foil for window. The compensated foil can bear more burden through the grid-construction as standard foils. Features: Transparent, UV-stabilized  

This website uses cookies to ensure the best experience possible. More information...