Go to homepage
Catalogue
Wishlist
Request Basket
Categories
Skip image gallery
Mauerkragen aus TPE - Themoplastischem Elastomer
Mauerkragen aus TPE - Themoplastischem Elastomer
Mauerkragen aus TPE - Themoplastischem Elastomer

Properties

ø in mm: 315 mm

Mauerkragen aus TPE - Themoplastischem Elastomer

Product number: 61LXMK315

Available, delivery time: 1-3 days

ø in mm

Price on request

Stk

Description

MPA certificated!

Masonry collars from TPE-Themoplastic Elastomer

Application area:
The sealing collar is used whenever a water-tight lead-through of pipe lines through foundation slabs, walls, and masonry is required.

The sealing collar, which has passed the pressure test at 5 bar, prevents moisture from getting into the building along the outer pipe walls.

Tested for impermeability up to 50 m water column.

Properties:
The sealing collar is supplied in pre-assembled condition with 2 stainless steel straps.

The circular, 4 cm wide collar, which is equipped with additional waterstops, prevents liquids from getting into the building.

Small waterstops inside the collar ensure water-tightness up to a water column of 50 m after tightening of the stainless steel fastening straps.
Assembly

  • clean pipe surface if necessary
  • slide on the sealing collar and fix it in the centre of the concrete/wall
  • tighten the fastening straps

Properties

ø in mm: 315 mm
Downloads "Mauerkragen aus TPE - Themoplastischem Elastomer"
Filter products
Variants

With the help of our variant list you can find your article faster and easier.

Product Nr.
Product
ø in mm
Price
Action
61LXMK025
 Mauerkragen aus TPE - Themoplastischem Elastomer
25 mm
61LXMK032
 Mauerkragen aus TPE - Themoplastischem Elastomer
32 mm
61LXMK063
 Mauerkragen aus TPE - Themoplastischem Elastomer
63 mm
61LXMK075
 Mauerkragen aus TPE - Themoplastischem Elastomer
75 mm
61LXMK090
 Mauerkragen aus TPE - Themoplastischem Elastomer
90 mm
61LXMK125
 Mauerkragen aus TPE - Themoplastischem Elastomer
125 mm
61LXMK140
 Mauerkragen aus TPE - Themoplastischem Elastomer
140 mm
61LXMK170
 Mauerkragen aus TPE - Themoplastischem Elastomer
170 mm
61LXMK180
 Mauerkragen aus TPE - Themoplastischem Elastomer
180 mm
61LXMK225
 Mauerkragen aus TPE - Themoplastischem Elastomer
225 mm
61LXMK250
 Mauerkragen aus TPE - Themoplastischem Elastomer
250 mm
61LXMK315
 Mauerkragen aus TPE - Themoplastischem Elastomer
315 mm
61LXMK400
 Mauerkragen aus TPE - Themoplastischem Elastomer
400 mm
61LXMK500
 Mauerkragen aus TPE - Themoplastischem Elastomer
500 mm
61LXMK200
 Mauerkragen aus TPE - Themoplastischem Elastomer
200 mm
61LXMK160
 Mauerkragen aus TPE - Themoplastischem Elastomer
160 mm
61LXMK040
 Mauerkragen aus TPE - Themoplastischem Elastomer
40 mm
61LXMK050
 Mauerkragen aus TPE - Themoplastischem Elastomer
50 mm
61LXMK110
 Mauerkragen aus TPE - Themoplastischem Elastomer
110 mm
Skip product gallery

Customers also viewed

Rundfix (PVC-free)

PVC- free spacers for vertical reinforcement.  

Formwork oil Prägnit ST300

Tested formwork oil suitable for all formworks. Good degradable with certificate Mixture of mineral oil and plant-based oil Apply a thin layer for best effect with protection of the formwork. No cleaning of the formwork neccessary.  Degredable for 81% within 21 days.

De-icing chemical SNO-N-ICE

De-icing agent: Sno N Ice is an alternative to conventional road salt for use on concrete surfaces. An additive reliably prevents concrete from spalling and surface scaling (dusting).

Ringraumdichtung P-Cable Basic HRD 80

The P-Cable Basic HRD annular seal is available in various designs.The following product identification is used: SG x (number of holes) / y-z (area in which the hole can be adjusted)

Mauerkragen aus TPE - Themoplastischem Elastomer

MPA certificated! Masonry collars from TPE-Themoplastic Elastomer Application area:The sealing collar is used whenever a water-tight lead-through of pipe lines through foundation slabs, walls, and masonry is required. The sealing collar, which has passed the pressure test at 5 bar, prevents moisture from getting into the building along the outer pipe walls. Tested for impermeability up to 50 m water column. Properties:The sealing collar is supplied in pre-assembled condition with 2 stainless steel straps. The circular, 4 cm wide collar, which is equipped with additional waterstops, prevents liquids from getting into the building. Small waterstops inside the collar ensure water-tightness up to a water column of 50 m after tightening of the stainless steel fastening straps.Assembly clean pipe surface if necessary slide on the sealing collar and fix it in the centre of the concrete/wall tighten the fastening straps

Ringraumdichtung Basic 1 - Dichtungsbreite 20 mm

Annular seal Basic 1 made of stainless steel, V2A (material no.1.4301) Seal width 20 mm for non-pressing water up to 1.5 bar completely gastight and watertight built-in torque control EPDM rubber insert DIVIDING THE RING SEAL BASIC 1 To divide the press seal Basic 1, loosen and remove a screw. Unfold the front and rear press segment and cut the rubber press ring radially about 10 mm to the left or right of the screw hole with a sharp knife.

Ringraumdichtung Basic 1 - Dichtungsbreite 20 mm

Annular seal Basic 1 made of stainless steel, V2A (material no.1.4301) Seal width 20 mm for non-pressing water up to 1.5 bar completely gastight and watertight built-in torque control EPDM rubber insert DIVIDING THE RING SEAL BASIC 1 To divide the press seal Basic 1, loosen and remove a screw. Unfold the front and rear press segment and cut the rubber press ring radially about 10 mm to the left or right of the screw hole with a sharp knife.

Ringraumdichtung P-Cable Basic HRD Ø100

The P-Cable Basic HRD annular seal is available in various designs.The following product identification is used: SG x (number of holes) / y-z (area in which the hole can be adjusted)

Mauerkragen aus TPE - Themoplastischem Elastomer

MPA certificated! Masonry collars from TPE-Themoplastic Elastomer Application area:The sealing collar is used whenever a water-tight lead-through of pipe lines through foundation slabs, walls, and masonry is required. The sealing collar, which has passed the pressure test at 5 bar, prevents moisture from getting into the building along the outer pipe walls. Tested for impermeability up to 50 m water column. Properties:The sealing collar is supplied in pre-assembled condition with 2 stainless steel straps. The circular, 4 cm wide collar, which is equipped with additional waterstops, prevents liquids from getting into the building. Small waterstops inside the collar ensure water-tightness up to a water column of 50 m after tightening of the stainless steel fastening straps.Assembly clean pipe surface if necessary slide on the sealing collar and fix it in the centre of the concrete/wall tighten the fastening straps

Kunststoffverschlussdeckel für Futterrohr

Sealing cap + formwork aid for WELLO and FASO lining tube reusable

This website uses cookies to ensure the best experience possible. More information...