Go to homepage
Catalogue
Wishlist
Request Basket
Skip image gallery

Properties

Medium pipe Ø: 159 - 162 mm
ø in mm: 200 mm

Ringraumdichtung Basic 1 - Dichtungsbreite 20 mm

Product number: 61LXNC200N159

Available, delivery time: 1-3 days

ø in mm
Medium pipe Ø

Price on request

Stk

Description

  • Annular seal Basic 1 made of stainless steel, V2A (material no.1.4301)
  • Seal width 20 mm for non-pressing water up to 1.5 bar
  • completely gastight and watertight
  • built-in torque control
  • EPDM rubber insert


DIVIDING THE RING SEAL BASIC 1

  • To divide the press seal Basic 1, loosen and remove a screw.
  • Unfold the front and rear press segment and cut the rubber press ring radially about 10 mm to the left or right of the screw hole with a sharp knife.

Properties

Medium pipe Ø: 159 - 162 mm
ø in mm: 200 mm
Filter products
Variants

With the help of our variant list you can find your article faster and easier.

Product Nr.
Product
Medium pipe Ø
ø in mm
Price
Action
61LXNC125N060
 Ringraumdichtung Basic 1 - Dichtungsbreite 20 mm
60 - 63 mm
125 mm
61LXNC150N110
 Ringraumdichtung Basic 1 - Dichtungsbreite 20 mm
110 - 112 mm
150 mm
61LXNC200N110
 Ringraumdichtung Basic 1 - Dichtungsbreite 20 mm
110 - 112 mm
200 mm
61LXNC200N159
 Ringraumdichtung Basic 1 - Dichtungsbreite 20 mm
159 - 162 mm
200 mm
Skip product gallery

Customers also viewed

Ringraumdichtung Basic 1 - Dichtungsbreite 20 mm
Ringraumdichtung Basic 1 - Dichtungsbreite 20 mm
Annular seal Basic 1 made of stainless steel, V2A (material no.1.4301) Seal width 20 mm for non-pressing water up to 1.5 bar completely gastight and watertight built-in torque control EPDM rubber insert DIVIDING THE RING SEAL BASIC 1 To divide the press seal Basic 1, loosen and remove a screw. Unfold the front and rear press segment and cut the rubber press ring radially about 10 mm to the left or right of the screw hole with a sharp knife.
Ringraumdichtung Basic 1 - Dichtungsbreite 20 mm
Ringraumdichtung Basic 1 - Dichtungsbreite 20 mm
Annular seal Basic 1 made of stainless steel, V2A (material no.1.4301) Seal width 20 mm for non-pressing water up to 1.5 bar completely gastight and watertight built-in torque control EPDM rubber insert DIVIDING THE RING SEAL BASIC 1 To divide the press seal Basic 1, loosen and remove a screw. Unfold the front and rear press segment and cut the rubber press ring radially about 10 mm to the left or right of the screw hole with a sharp knife.
Ringraumdichtung Basic 1 - Dichtungsbreite 20 mm
Ringraumdichtung Basic 1 - Dichtungsbreite 20 mm
Annular seal Basic 1 made of stainless steel, V2A (material no.1.4301) Seal width 20 mm for non-pressing water up to 1.5 bar completely gastight and watertight built-in torque control EPDM rubber insert DIVIDING THE RING SEAL BASIC 1 To divide the press seal Basic 1, loosen and remove a screw. Unfold the front and rear press segment and cut the rubber press ring radially about 10 mm to the left or right of the screw hole with a sharp knife.
Ringraumdichtung Basic 1 - Dichtungsbreite 40 mm
Ringraumdichtung Basic 1 - Dichtungsbreite 40 mm
Annular seal Basic 1 made of stainless steel, V2A (material no.1.4301) Seal width 40 mm for pressing water up to 2.5 bar completley gastight and watertight built-in torque control EPDM rubber insert DIVIDING THE RING SEAL BASIC 1 To split the annular seal Basic 1, loosen and remove a screw. Unfold the front and rear press segment and cut the rubber press ring radially about 10 mm to the left or right of the screw hole with a sharp knife.
Ringraumdichtung; Compakt Universaldichtung Ø 150 mm
Ringraumdichtung; Compakt Universaldichtung Ø 150 mm
Core drilling Ø 150 mm Weight approx. 1.2 kg further dimensions on request
Ringraumdichtung Basic 1 - Dichtungsbreite 40 mm
Ringraumdichtung Basic 1 - Dichtungsbreite 40 mm
Annular seal Basic 1 made of stainless steel, V2A (material no.1.4301) Seal width 40 mm for pressing water up to 2.5 bar completley gastight and watertight built-in torque control EPDM rubber insert DIVIDING THE RING SEAL BASIC 1 To split the annular seal Basic 1, loosen and remove a screw. Unfold the front and rear press segment and cut the rubber press ring radially about 10 mm to the left or right of the screw hole with a sharp knife.
Annular Seal - cable Ø 100 mm foldable
Annular Seal - cable Ø 100 mm foldable
Annular seal - 4-fold cable Ø 100 mm MR Ø 6-40 mm Tested up to 10 m WS (1 bar) Hinged Annular seal for core drilling / wall sleeves Ø 100 mm Segment ring technology for 1 cable / tube Ø 25, 32 or 40 mm as well as 3 cables Ø 6-18 mm completly gastight and watertight Sealing width 40 mm, pressure-tight up to 1 bar profile and screws made of stainless steel V2A EPDM rubber insert integrated blind plug We expressly point out that if there are deviations from the information in the assembly instructions and if our products are used improperly, no guarantee is given for any consequential damage. MR = carrier pipe. Technical changes reserved.
Gliederketten Element Link-Seal C verzinkt
Gliederketten Element Link-Seal C verzinkt
Standard chains - stock items Type C: EPDM rubber (black standard), galvanized screws The link chain required can be easily selected using the size chart.Depending on the dimension, a different number of links of the respective type are put together to form a chain. The following versions on request: Type BC: EPDM rubber (blue, extra soft for plastic pipes), galvanized screws Type S316: EPDM rubber (black), screws V4A stainless steel Type BS316: EPDM rubber (blue, extra soft for plastic pipe), screws V4A stainless steel Type O: rubber nitrile (green, oil-resistant), galvanized screws. Type OS316: rubber nitrile (green, oil-resistant), screws V4A stainless steel.
Seal "onion ring" technology Ø 150 mm - fixed type 2 width 40 mm MR Ø 75, 90, 110 mm
Seal "onion ring" technology Ø 150 mm - fixed type 2 width 40 mm MR Ø 75, 90, 110 mm
Super segment ring technology for cables and pipes 3 segment rings with diameter lettering for Ø 75, 90 and 110 mm Subsequently divisible for pipes that have already been laid for core drilling / wall sleeves Ø 150 mm Seal width 40 mm, pressure-tight up to 1 bar integrated torque control visible and tangible U-profile and screws made of stainless steel V2A EPDM rubber insert integrated blind plug
Ringraumdichtung Basic 1 - Dichtungsbreite 40 mm
Ringraumdichtung Basic 1 - Dichtungsbreite 40 mm
Annular seal Basic 1 made of stainless steel, V2A (material no.1.4301) Seal width 40 mm for pressing water up to 2.5 bar completley gastight and watertight built-in torque control EPDM rubber insert DIVIDING THE RING SEAL BASIC 1 To split the annular seal Basic 1, loosen and remove a screw. Unfold the front and rear press segment and cut the rubber press ring radially about 10 mm to the left or right of the screw hole with a sharp knife.
This website uses cookies to ensure the best experience possible. More information...