Properties
| ø in mm: | 110 mm |
|---|
Sealing collar KG-FIX 110
Product number:
61LXMK110KG
Available, delivery time: 1-3 days
Price on request
Properties
| ø in mm: | 110 mm |
|---|
Skip product gallery
Customers also viewed
Mauerkragen aus TPE - Themoplastischem Elastomer
MPA certificated!
Masonry collars from TPE-Themoplastic Elastomer
Application area:The sealing collar is used whenever a water-tight lead-through of pipe lines through foundation slabs, walls, and masonry is required.
The sealing collar, which has passed the pressure test at 5 bar, prevents moisture from getting into the building along the outer pipe walls.
Tested for impermeability up to 50 m water column.
Properties:The sealing collar is supplied in pre-assembled condition with 2 stainless steel straps.
The circular, 4 cm wide collar, which is equipped with additional waterstops, prevents liquids from getting into the building.
Small waterstops inside the collar ensure water-tightness up to a water column of 50 m after tightening of the stainless steel fastening straps.Assembly
clean pipe surface if necessary
slide on the sealing collar and fix it in the centre of the concrete/wall
tighten the fastening straps
Log in to see more information
spacers with plastic nail flags
Chamfer strip made of impact-resistant material to breack edges and also as decoration by extensive exposed-concrete parts.
Fixing at an interval of 10-15 cm with nail holes.
Log in to see more information
Seal "onion ring" technology Ø 200 mm - divisible MR Ø 110, 125, 135, 160 mm
Super segment ring technology for cables and pipes
segment rings with diameter inscription for Ø 110, 125, 135 and 160 mm
Subsequently divisible for pipes that have already been laid
for core drilling / wall sleeves Ø 150 mm
Seal width 40 mm, pressure-tight up to 1 bar
integrated torque control visible and tangible
U-profile and screws made of stainless steel V2A
EPDM rubber insert
integrated blind plugs
Log in to see more information
spacers with nail holes made of plastic
spacers made of impact-resistant material for breaking edges on square columns and beams, but also for decorating large exposed concrete parts.
Provide nail holes every 10-15 cm for fastening.
Log in to see more information
Uni Futterrohr UFR mit Anspachtelflansch
The lining tube of the future! - For every type of wall!
The Uni casing pipe (UFR) is a plastic casing pipe with an octagonal filler flange (flange made of ABS).
When using plastic-modified bitumen coatings (load case in accordance with DIN 18195 Part 4), the external seal can be applied via the filler flange.
The profile web sealing tapes included in the scope of delivery ensure a secure seal even with double / element walls and waterproof concrete.Longitudinally watertight up to 1 bar in waterproof concrete (white tub).
Log in to see more information
Kunststoff-Futterrohr WELLO mit Quellband
WELLO, the lining tube made of PE with an all-round swelling coating.
The tube is smooth inside. The undulating outside clings to the concrete. Two swelling tapes applied around the center also prevent water from entering the structure
Wello casing, double security through corrugation and swelling tape, sealing by means of an annular seal. Tested up to 30m water column.
Log in to see more information
KG-tube implementation
MPA geprüft!
Die KG-Rohrdurchführungen werden in den Durchmessern DN 100 bis DN 200 gefertigt. Alle gängigen Wandstärken von 200 bis 400 mm sind einbaufertig als Doppelmuffenrohr sofort aus Lagervorrat lieferbar.
Die Rohrdurchführung ist werkseitig mittig mit einem Mauerkragen versehen, der verhindert, dass Feuchtigkeit ins Bauwerk eindringen kann. Die Rohrdurchführungen eignen sich für den Beton- und Mauerwerksbau.
Die druckwasserdichten Hauseinführungen haben eine hohe Witterungs- und Ozonbeständigkeit, sowie eine gute Säure- und Laugenbeständigkeit. Sie können in Bereichen von -30°C bis +100° C eingesetzt werden.
Lieferung:Die KG-Rohrdurchführung wird auf Wandstärke gefertigt geliefert.Pro Rohrdurchführung sind zwei Dichtungen und zwei Schalungs- bzw. Verschlussdeckel im Lieferumfang enthalten.Montage
KG-Muffenstopfen an die Wandschalung nageln
Dichtung in die Rohrdurchführung einlegen.
Rohrdurchführung auf den Muffenstopfen schieben.
Die zweite Seite der Rohrdurchführung mit dem Stopfen verschließen und mit einem von aussen durch die Schalung geschlagenen Nagel fixieren
Log in to see more information
Bricklayer's platform compact galvanized 1.5 t
Technical specifications:
Load capacity: 500 kg / m², max. 1500 kg Extracts max. 125 kg Attachment max. 300 kg
Platform height: stepless from 0.46 - 1.80 meters without wheelset
Platform size: width 1.20 m length 2.19 - 3.49 m
Transport dimensions: 2.19 x 1.26 x 0.46 m
Weight: 498 kg
Electrical connection: 1 device plug 230V 16A feed
Speedies Bar Spacer 20 mm
Application:
For concreting floors or concrete slabs as spacers of the lower preservation. Furthermore, the Speedies surface spacers can also be used very well in the concrete precast plant due to the pointed feet.
Your advantage:
Material polypropylene PP
Pressure resistant / Very high stability
Ergonomic
Transport optimized (europallet)
Consumption approx. 1-1,5 pcs./m²
Product is patent pending
MPA-tested
Log in to see more information
Deckenrandschalung XPS 50 FZ ISO
Slab edge shuttering and insulation in one.
50 mm extruded polystyrene. Foot is made of 4mm fibre cement (Width 10 cm)
Elements with tongue and groove. Standard in 1 or 2 metre elements, other lengths on request.
Log in to see more information