Shaft bearings 10 x 200 mm

Breite in mm:	200 mm
Stärke in mm:	10 mm

Breite in mm:	200 mm
Stärke in mm:	10 mm

Impact sound - bearing 10 x 100 mm

The impact sound bearing is a PUR-bound rubber granulate forSupporting stairs and ceilings. Technical specifications: Volume weight 820 kg / m³Basis weight 820 g / m² / mmTear strength according to DIN 53571 1.2 N / mm²Elongation at break according to DIN 53571 90%Temperature resistance -40 ° C - 90 ° CFire behavior according to DIN 4102 class B2Recommended load 0.1 - 0.4 N / mm²Feather area approx. 0.7 - 1.5 mm

Sylomer-Polyurethanlager SR11

Sylomer impact sound bearing type SR 11 - YELLOW Area of application Pressure load Deformation Form factor dependent, the specified values apply to form factor q = 3 Static area of application(static loads) up to 0,011 N/mm² approx. 7% Dynamic area of application(static and dynamic loads) up to 0,016 N/mm² approx. 20% Peak loads(rare, short-term loads) up to 0,5 N/mm² approx. 80%

Sylomer-Polyurethanlager SR11

Sylomer impact sound bearing type SR 11 - YELLOW Area of application Pressure load Deformation Form factor dependent, the specified values apply to form factor q = 3 Static area of application(static loads) up to 0,011 N/mm² approx. 7% Dynamic area of application(static and dynamic loads) up to 0,016 N/mm² approx. 20% Peak loads(rare, short-term loads) up to 0,5 N/mm² approx. 80%

Sylomer-Polyurethanlager SR110

Sylomer sound bearing bearing type SR110 Area of application Pressure load Deformation Form factor dependent, the specified values apply to form factor q = 3 Static area of application(static loads) up to 0,110 N/mm² approx. 10 % Dynamic area of application(static and dynamic loads) up to 0,160 N/mm² approx. 20% Peak loads(rare, short-term loads) up to 3,0 N/mm² approx. 70%

Sylomer-Polyurethanlager SR 18

Sylomer sound bearing bearing type SR 18 Area of application Pressure load Deformation Form factor dependent, the specified values apply to form factor q = 3 Static area of application(static loads) up to 0,018 N/mm² approx. 7 % Dynamic area of application(static and dynamic loads) up to 0,023 N/mm² approx. 20% Peak loads(rare, short-term loads) up to 0,75 N/mm² approx. 80%

Evaporation protection VIBASOL Curing TC

Version: Curing TC Is sprayed in a thin layer on fresh concrete surfaces that are further treated. The concrete surface is covered with a water-impermeable protective film and thus prevents premature drying out. Prevention of shrinkage cracks. Please note! Evaporation protection is sensitive to frost. Storage only above 0 ° C

Sylomer-Polyurethanlager SR 55

Sylomer impact sound bearing type SR 55 Area of application Pressure load Deformation Form factor dependent, the specified values apply to form factor q = 3 Static area of application(static loads) up to 0,055 N/mm² approx. 7 % Dynamic area of application(static and dynamic loads) up to 0,076 N/mm² approx. 20% Peak loads(rare, short-term loads) up to 2,0 N/mm² approx. 75%

Sylomer-Polyurethanlager SR 28

Sylomer sound bearing bearing type SR 28 Area of application Pressure load Deformation Form factor dependent, the specified values apply to form factor q = 3 Static area of application(static loads) up to 0,028 N/mm² approx. 7 % Dynamic area of application(static and dynamic loads) up to 0,037 N/mm² approx. 20 % Peak loads(rare, short-term loads) up to 1,0 N/mm² approx. 75 %

Evaporation protection Antisol - E

Version: Antisol - E Antisol -E is sprayed in a thin layer onto fresh concrete surfaces. The concrete surface is covered with a waterproof protective film and thus prevents premature drying out. Prevention of shrinkage cracks. Please note! Evaporation protection is sensitive to frost. Storage only above 0 ° C

Evaporation protection Antisol - E

Version: Antisol - E Antisol -E is sprayed in a thin layer onto fresh concrete surfaces. The concrete surface is covered with a waterproof protective film and thus prevents premature drying out. Prevention of shrinkage cracks. Please note! Evaporation protection is sensitive to frost. Storage only above 0 ° C

Properties

Shaft bearings 10 x 200 mm

Description

Properties