Go to homepage
Catalogue
Wishlist
Request Basket
Skip image gallery

Properties

Abmessung in mm: (A) 145 mm / (B) 195 mm

Leibungsschalungswinkel verzinkt

Product number: 69QA5804
Abmessung in mm
Stk

Description

Galvanized formwork bracket:

  • Inexpensive
  • Versatile in use
  • Can be attached with screws or nails (3 screws or 5 nails are required per side)

Properties

Abmessung in mm: (A) 145 mm / (B) 195 mm
Filter products
Variants

With the help of our variant list you can find your article faster and easier.

Product Nr.
Product
Abmessung in mm
69QA5802
 Leibungsschalungswinkel verzinkt
(A) 245 mm / (B) 295 mm
69QA5803
 Leibungsschalungswinkel verzinkt
(A) 195 mm / (B) 245 mm
69QA5804
 Leibungsschalungswinkel verzinkt
(A) 145 mm / (B) 195 mm
Skip product gallery

Customers also viewed

Leibungsschalungswinkel verzinkt
Leibungsschalungswinkel verzinkt
Galvanized formwork bracket: Inexpensive Versatile in use Can be attached with screws or nails (3 screws or 5 nails are required per side)
Leibungsschalungswinkel verzinkt
Leibungsschalungswinkel verzinkt
Galvanized formwork bracket: Inexpensive Versatile in use Can be attached with screws or nails (3 screws or 5 nails are required per side)
Randabschaler
Randabschaler
Easy device for shuttering of ceiling etc.Mounting on the walls with any turnbuckle or threaded rod.Height adjustable through longitudinal slot. Time saving Easy handling No Wood surplus
Half frame 1 m x 0,65 lacquered G0150
Half frame 1 m x 0,65 lacquered G0150
Half frame 1,0 x 0,65 cm from tubes 48 x 2,3 mm. All stand parts are varnished or hot-dip galvanized available. Version corresponds ÖNORM B 4007 and HD 1000.
Plaster scaffold jack - rotatable
Plaster scaffold jack - rotatable
Plaster scaffold jack - rotatable 60 - 90cm Robust steel-construction Absolutely stable Resting width: 100 cm Height adjustable every 5 cm
Doppelkopfnägel 75 mm
Doppelkopfnägel 75 mm
Doppelkopfnägel - sparen Zeit und schonen die Schalung.
Formwork stop GFK conrete grey
Formwork stop GFK conrete grey
Formwork stop made of fibreglass. Pins Ø: 10 mm; Length: 100 mm ADVANTAGES: Non-corrosive High strength and stable Chemical resistance Fast and easy installation INSTALLATION: Mark the position of the formwork with a snap line. Drill periodically holes with a diameter of 10mm along the marking. ATTENTION: Please consider the length of the pins. 
Deckenrandschalung XPS 35 FZ ISO
Deckenrandschalung XPS 35 FZ ISO
Slab edge shuttering and insulation in one. 35 mm extruded polystyrene. Foot is made of 4mm fibre cement (Width 10 cm) Elements with tongue and groove. Standard in 1 or 2 metre elements, other lengths on request.
Schrägstütze 3,20 - 5,60 m DC
Schrägstütze 3,20 - 5,60 m DC
All versions with failure protection, accident proof. Universally usable as pressure- and traction props to support and adjust prefabricated concrete elements and formwoks. Flexible head- and baseplate Headplate: 140 x 100 x 6 mm, with hole ø 20 mm G-hook: Ø 14 mm (no loosing)
Faulenzer (special props)
Faulenzer (special props)
Perpendicular and angle setting Infinite adjustment with integrated spring base part Can be clamped between ground and ceiling Adjustment of the levels possible in varaible heights by sliding eyelets With synthetic cap on the upper end From profiled pipe inside 35 x 35, outer 40 x 40 mm
This website uses cookies to ensure the best experience possible. More information...