Properties

Höhe in cm:	30 cm
Stärke in mm:	10 mm

VIBA - formwork boads ECO

Product number: 83R30053E

Available, delivery time: 1-3 days

Höhe in cm

30 cm

40 cm

Price on request

Description

ECO Lost framework length: 1,25 m for ceiling formwork

Material: Wood concrete slab
Element - Length: 1250 mm, other lengths on request
Material - Thickness: 10 or 14 mm

Advantages:

lost formwork doesn't have to be removed from the concrete
easy mounting through screws or nails (light nailing)
time saving
optimum connection with concrete through 5 fixing strips by an element length of 1250 mm
Fixing strips is made of the same material as VIBA shuttering board

Höhe in cm:	30 cm
Stärke in mm:	10 mm

Variants

With the help of our variant list you can find your article faster and easier.

Product Nr.	Product	Höhe in cm	Price	Action
83R30053E	VIBA - formwork boads ECO	30 cm	Log in to see more information
83R30055E	VIBA - formwork boads ECO	40 cm	Log in to see more information

Product Nr. : 83R30053E

VIBA - formwork boads ECO

Price

Höhe in cm: 30 cm

In Stock

Available, delivery time: 1-3 days

Product Nr. : 83R30055E

VIBA - formwork boads ECO

Price

Höhe in cm: 40 cm

In Stock

Available, delivery time: 1-3 days

Zubehör

HB-Connector P - galv.

to connect and safe the wood-concrete slab edge shuttering, also VIBA - shuttering board HB, on the reinforcement. Material: galvanized Length: 80 mm Packaging: 100 pieces per bag

Customers also viewed

VIBA - shuttering board HB

SAM-spacer normal

Spacer system SAM for normal concrete.(no exposed concrete surface - the walls should be plastered or coverd afterwards) Easy and fast application, in combination with 27 mm Standard formwork panels. Package units:to wall thickness 50 cm 100 pcs. / Packfrom wall thickness 51 cm 50 pcs. / Pack Other special lengths (in cm downgrading) from 6 - 300 cm possible.

Schalungsbinder SAM 2

Suitable for Standard formwork panels width 25, 50 and 100 cm. multiple reusable binder made of steel strip. The length 100 cm is reinforced in the middle.

Zement-Verbund-Rohr (PVC) mit Spezialbeschichtung

• Homogeneous bond with concrete thanks to special coating • 2 end caps included in the scope of delivery • Gas-tight and watertight

Bolzen- und Mattenschneider

For commercial reinforcing steel III + IV according to DIN 488 strength approx. 550 N / mm2 as well as prestressing steels and tempered steel wire up to a strength of 1570 N / mm2 (48 HRc) Please note the following when using the bolt cutters: Our bolt cutters are made of the best material. Make sure that the knives are placed at a right angle to the piece to be cut. Stronger structural steels must not be cut through at once. They must first be pressed in firmly, after which the bolt cutter is opened and pushed in again. This makes cutting easier and prevents the knives from breaking. After pressing in, the bolt cutter must not be levered, swiveled or inclined as this would lead to the cutting edges breaking out. The bolt cutters must never be used for hardened steels, concrete or steel nails. The service life of the bolt cutters is enormously extended by regularly tightening the screws.

RiveStop Ø 24 mm x 70 mm SS intern-Einschub

TYPE: Internal RiveStop SS with stainless steel cover plate and stainless steel rivet mandrel. Ideal for exposed concrete walls in combination with the stainless steel cover. Water pressure tight up to 5 bar. Certified by APPLUS. It is recommended to use RiveStop with stainless steel rivets (SS) for sealing with direct water contact and constant pressing water. STEP 1: Insert RiveStop into the opening to be sealed. STEP 2: Remove the mandrel. The rivet will expand until the opening is hermetically sealed.

Faulenzer (special props)

Perpendicular and angle setting Infinite adjustment with integrated spring base part Can be clamped between ground and ceiling Adjustment of the levels possible in varaible heights by sliding eyelets With synthetic cap on the upper end From profiled pipe inside 35 x 35, outer 40 x 40 mm

SAM-spacer, Exposed concrete

Spacer system SAM for exposed concrete. (the concrete wall remains visible, there is no further cladding) In combination with 27 mm standard formwork panels, can be used quickly and easily. Packing units: up to a wall thickness of 30 cm 100 pieces / boxFrom a wall thickness of 31 cm 50 pieces / box Spacer for quick and economical shuttering of concrete and retaining walls. All special lengths (in cm increments) from 6 - 300 cm possible.

SAM-Pull hammer

to pull out the spacer-end after stripping the formwork. Suitable for normal concrete and exposed concrete.

SAM-spacer; without wedge

Spacer System SAM for visible concrete. In combination with 27 mm Standard formwork panels, fast and easy usage. Package units: to wall thickness 30 cm 100 pcs. / carton from wall thickness 31 cm 50 pcs. / carton Economical stripping of concrete - retaining walls. Exposed concrete not attached! All special lengths (in cm downgrading) from 6 - 300 cm possible.