Properties

Länge in mm:	780 mm

Bolzen- und Mattenschneider

Product number: 99D780ST

Available, delivery time: 1-3 days

Länge in mm

780 mm

920 mm

Price on request

Stk

Description

For commercial reinforcing steel III + IV according to DIN 488 strength approx. 550 N / mm2 as well as prestressing steels and tempered steel wire up to a strength of 1570 N / mm2 (48 HRc)

Please note the following when using the bolt cutters:

Our bolt cutters are made of the best material. Make sure that the knives are placed at a right angle to the piece to be cut. Stronger structural steels must not be cut through at once. They must first be pressed in firmly, after which the bolt cutter is opened and pushed in again. This makes cutting easier and prevents the knives from breaking. After pressing in, the bolt cutter must not be levered, swiveled or inclined as this would lead to the cutting edges breaking out. The bolt cutters must never be used for hardened steels, concrete or steel nails. The service life of the bolt cutters is enormously extended by regularly tightening the screws.

Properties

Länge in mm:	780 mm

Variants

With the help of our variant list you can find your article faster and easier.

Product Nr.	Product	Länge in mm	Price	Action
99D780ST	Bolzen- und Mattenschneider	780 mm	Log in to see more information	Log in or Sign up
99D920ST	Bolzen- und Mattenschneider	920 mm	Log in to see more information	Log in or Sign up

Product Nr. : 99D780ST

Bolzen- und Mattenschneider

Price

Länge in mm: 780 mm

In Stock

Available, delivery time: 1-3 days

Product Nr. : 99D920ST

Bolzen- und Mattenschneider

Price

Länge in mm: 920 mm

In Stock

Available, delivery time: 1-3 days

Customers also viewed

Bolzen- und Mattenschneider

For commercial reinforcing steel III + IV according to DIN 488 strength approx. 550 N / mm2 as well as prestressing steels and tempered steel wire up to a strength of 1570 N / mm2 (48 HRc) Please note the following when using the bolt cutters: Our bolt cutters are made of the best material. Make sure that the knives are placed at a right angle to the piece to be cut. Stronger structural steels must not be cut through at once. They must first be pressed in firmly, after which the bolt cutter is opened and pushed in again. This makes cutting easier and prevents the knives from breaking. After pressing in, the bolt cutter must not be levered, swiveled or inclined as this would lead to the cutting edges breaking out. The bolt cutters must never be used for hardened steels, concrete or steel nails. The service life of the bolt cutters is enormously extended by regularly tightening the screws.

Fleece Geotextile

Geotex is a mechanic strengthend fleece to split and filter.Main application is gravel, passably and grassed flat roofs. What can Geotex - fleece? Geotex seperate the particle to allow unhindered drain of water. The fleece prevent, even by high drain amount, blockage.

Spacer Speedies floor

Application: For concreting floors or concrete slabs as spacers of the lower preservation. Furthermore, the Speedies surface spacers can also be used very well in the concrete precast plant due to the pointed feet. Your advantage: Material polypropylene PP Pressure resistant / Very high stability Ergonomic Transport optimized (europallet) Consumption approx. 1-1,5 pcs./m² Product is patent pending MPA-tested

PAE-Construction foil

Other widths and strengths on request. Rated strength less usual tolerance.

PAE-Construction foil

Other widths and strengths on request. Rated strength less usual tolerance.

Speedies Bar Spacer 20 mm

Spiral anchor - galvanized

Spiral anchor for screwing into insulation boards for fastening the boards. Finish: galvanized.

PE wall damp course

The damp proof courses protect the masonry from rising moisture. Both sides of the material are ripped and increase the liability to the mortar. Material: Polyethylen, slip-resistant; Thickness: ca. 0,4 mm.

Corabit KK Joint Sealing Strip

The Corabit KK Joint Sealing Strip is a self-adhesive, co-extruded joint sealing strip based on bitumen, specially developed for road construction. The adhesive layer is also made of polymer-modified bitumen, ensuring excellent adhesion and reliable sealing performance. Joint interfaces typically occur in the following applications: Surface reinstatement in utility trench construction (connection to existing pavement) Repair and rehabilitation of damaged pavement surfaces New construction and maintenance throughout the road network (construction joints, longitudinal joints, and edge joints)

Unischaber HM

Universal scrapers with embedded hard metal indexable inserts and bent push knife from special steel. Handle length 850 or 1300 mm. Simple replaceable shee from quality spring steel. Knot-free handle.