Properties

Länge in mm:	780 mm

Bolzen- und Mattenschneider

Product number: 99D780ST

Länge in mm

780 mm

920 mm

Stk

Description

For commercial reinforcing steel III + IV according to DIN 488 strength approx. 550 N / mm2 as well as prestressing steels and tempered steel wire up to a strength of 1570 N / mm2 (48 HRc)

Please note the following when using the bolt cutters:

Our bolt cutters are made of the best material. Make sure that the knives are placed at a right angle to the piece to be cut. Stronger structural steels must not be cut through at once. They must first be pressed in firmly, after which the bolt cutter is opened and pushed in again. This makes cutting easier and prevents the knives from breaking. After pressing in, the bolt cutter must not be levered, swiveled or inclined as this would lead to the cutting edges breaking out. The bolt cutters must never be used for hardened steels, concrete or steel nails. The service life of the bolt cutters is enormously extended by regularly tightening the screws.

Properties

Länge in mm:	780 mm

Variants

With the help of our variant list you can find your article faster and easier.

Product Nr.	Product	Länge in mm
99D780ST	Bolzen- und Mattenschneider	780 mm
99D920ST	Bolzen- und Mattenschneider	920 mm

Product Nr. : 99D780ST

Bolzen- und Mattenschneider

Price

Länge in mm: 780 mm

In Stock

Available, delivery time: 1-3 days

Product Nr. : 99D920ST

Bolzen- und Mattenschneider

Price

Länge in mm: 920 mm

In Stock

Available, delivery time: 1-3 days

Customers also viewed

Bolzen- und Mattenschneider

For commercial reinforcing steel III + IV according to DIN 488 strength approx. 550 N / mm2 as well as prestressing steels and tempered steel wire up to a strength of 1570 N / mm2 (48 HRc) Please note the following when using the bolt cutters: Our bolt cutters are made of the best material. Make sure that the knives are placed at a right angle to the piece to be cut. Stronger structural steels must not be cut through at once. They must first be pressed in firmly, after which the bolt cutter is opened and pushed in again. This makes cutting easier and prevents the knives from breaking. After pressing in, the bolt cutter must not be levered, swiveled or inclined as this would lead to the cutting edges breaking out. The bolt cutters must never be used for hardened steels, concrete or steel nails. The service life of the bolt cutters is enormously extended by regularly tightening the screws.

PAE-Construction foil

Other widths and strengths on request. Rated strength less usual tolerance.

Speedies Bar Spacer 20 mm

Application: For concreting floors or concrete slabs as spacers of the lower preservation. Furthermore, the Speedies surface spacers can also be used very well in the concrete precast plant due to the pointed feet. Your advantage: Material polypropylene PP Pressure resistant / Very high stability Ergonomic Transport optimized (europallet) Consumption approx. 1-1,5 pcs./m² Product is patent pending MPA-tested

PAE-Construction foil

Other widths and strengths on request. Rated strength less usual tolerance.

Spacer Speedies floor

PE wall damp course

The damp proof courses protect the masonry from rising moisture. Both sides of the material are ripped and increase the liability to the mortar. Material: Polyethylen, slip-resistant; Thickness: ca. 0,4 mm.

PAE-Construction foil

Other widths and strengths on request. Rated strength less usual tolerance.

PAE-Construction foil

Other widths and strengths on request. Rated strength less usual tolerance.

Bauschutzmatte Gummigranulat

Unsere Bauschutzmatte ist eine Gummimatte, welche in Rollen geliefert und zur Ausführung von schwimmenden Estrichen verwendet wird. Die Verwendung von hoch elastischen Polymerbindemitteln und der spezifischen Auflagefläche ermöglichen eine erstklassige und langfristig garantierte Dämmung von Trittschall. Die Matte wird aus Gummigranulat von recycelten Autoreifen und einer auf edlen Polymeren basierenden Bindematrix hergestellt. Die Matte wird mit der glatten Seite nach oben und der rauhen Seite nach unten verlegt. Verarbeitung: Den zu dämmenden Unterboden reinigen und eventuelle Unebenheiten beseitigen. Die Bauschutzmatte Gummigranulat mit der glatten Seite nach oben ausrollen. Die Fugen stumpf stoßen und mit einem Klebeband verkleben.

Construction-compensated foil

Compensated foil for window. The compensated foil can bear more burden through the grid-construction as standard foils. Features: Transparent, UV-stabilized