Skip to main content Skip to search Skip to main navigation Skip to B2B platform navigation
Filter products
Variants

With the help of our variant list you can find your article faster and easier.

Product Nr.
Product
Abmessung in mm
69QA5802
Leibungsschalungswinkel verzinkt
(A) 245 mm / (B) 295 mm
69QA5803
Leibungsschalungswinkel verzinkt
(A) 195 mm / (B) 245 mm
69QA5804
Leibungsschalungswinkel verzinkt
(A) 145 mm / (B) 195 mm
Skip product gallery

Customers also viewed

Leibungsschalungswinkel verzinkt

Galvanized formwork bracket: Inexpensive Versatile in use Can be attached with screws or nails (3 screws or 5 nails are required per side)

Leibungsschalungswinkel verzinkt

Galvanized formwork bracket: Inexpensive Versatile in use Can be attached with screws or nails (3 screws or 5 nails are required per side)

Foundation anchor glav, height 90 cm

Simple support for the base plate stripping Because of its expanded earth spike also applicable for soft grounds.

Kanalstrebe

Trench strut single spindle Head- and baseplate bent at the ends and with nailholes.Threaded spindle loose at the external tube.

Connecting Clamp for Round Wire to Reinforcement | Galvanised

Connecting clamp for connection of round conductors to the reinforcement. Type with screw M10.Suitable for round conductor 8 + 10 mm, reinforcement Ø 6-22 mm.

Lattenpfahl mit 2 Bügel Ø 15 mm

Lattenpfahl lackiert zur Absicherung auf der Baustelle. Pfahl mit 2 Bügel für z.B. Absperrlatten.

Formwork stop GFK conrete grey

Formwork stop made of fibreglass. Pins Ø: 10 mm; Length: 100 mm ADVANTAGES: Non-corrosive High strength and stable Chemical resistance Fast and easy installation INSTALLATION: Mark the position of the formwork with a snap line. Drill periodically holes with a diameter of 10mm along the marking. ATTENTION: Please consider the length of the pins. 

VITZTHUM - square concrete form

Concrete form for square pillars. Easy stripping through integrated division line. 

Deckenrandschalung XPS 50 FZ ISO

Slab edge shuttering and insulation in one. 50 mm extruded polystyrene. Foot is made of 4mm fibre cement (Width 10 cm) Elements with tongue and groove. Standard in 1 or 2 metre elements, other lengths on request.

Kantenreiniger für Schalungsplatten

Handgerät für die einfache Reinigung von Kanten von Schaltafel von 12 - 27 mm.