Properties

Abmessung in mm:	(A) 245 mm / (B) 295 mm

Leibungsschalungswinkel verzinkt

Product number: 69QA5802

Abmessung in mm

(A) 145 mm / (B) 195 mm

(A) 195 mm / (B) 245 mm

(A) 245 mm / (B) 295 mm

Stk

Description

Galvanized formwork bracket:

Inexpensive
Versatile in use
Can be attached with screws or nails (3 screws or 5 nails are required per side)

Properties

Abmessung in mm:	(A) 245 mm / (B) 295 mm

Variants

With the help of our variant list you can find your article faster and easier.

Product Nr.	Product	Abmessung in mm
69QA5802	Leibungsschalungswinkel verzinkt	(A) 245 mm / (B) 295 mm
69QA5803	Leibungsschalungswinkel verzinkt	(A) 195 mm / (B) 245 mm
69QA5804	Leibungsschalungswinkel verzinkt	(A) 145 mm / (B) 195 mm

Product Nr. : 69QA5802

Leibungsschalungswinkel verzinkt

Price

Abmessung in mm: (A) 245 mm / (B) 295 mm

In Stock

Available, delivery time: 1-3 days

Product Nr. : 69QA5803

Leibungsschalungswinkel verzinkt

Price

Abmessung in mm: (A) 195 mm / (B) 245 mm

In Stock

Available, delivery time: 1-3 days

Product Nr. : 69QA5804

Leibungsschalungswinkel verzinkt

Price

Abmessung in mm: (A) 145 mm / (B) 195 mm

In Stock

Available, delivery time: 1-3 days

Customers also viewed

Leibungsschalungswinkel verzinkt

Galvanized formwork bracket: Inexpensive Versatile in use Can be attached with screws or nails (3 screws or 5 nails are required per side)

Leibungsschalungswinkel verzinkt

Galvanized formwork bracket: Inexpensive Versatile in use Can be attached with screws or nails (3 screws or 5 nails are required per side)

Rebar spacers with sidewise recesses

U-shaped bar spacer made of plastic used for the efficient rearrangement of the reinforcement. Mill length 200 cm. Other lengths on request.

Half frame 1 m x 0,65 lacquered G0150

Half frame 1,0 x 0,65 cm from tubes 48 x 2,3 mm. All stand parts are varnished or hot-dip galvanized available. Version corresponds ÖNORM B 4007 and HD 1000.

Concrete spreader

Closed aluminium profile on both sides. Highly positioned at the edges to avoid visible residues.

Deckenrandschalung XPS 50 FZ ISO

Slab edge shuttering and insulation in one. 50 mm extruded polystyrene. Foot is made of 4mm fibre cement (Width 10 cm) Elements with tongue and groove. Standard in 1 or 2 metre elements, other lengths on request.

Mauerkragen aus TPE - Themoplastischem Elastomer

MPA certificated! Masonry collars from TPE-Themoplastic Elastomer Application area:The sealing collar is used whenever a water-tight lead-through of pipe lines through foundation slabs, walls, and masonry is required. The sealing collar, which has passed the pressure test at 5 bar, prevents moisture from getting into the building along the outer pipe walls. Tested for impermeability up to 50 m water column. Properties:The sealing collar is supplied in pre-assembled condition with 2 stainless steel straps. The circular, 4 cm wide collar, which is equipped with additional waterstops, prevents liquids from getting into the building. Small waterstops inside the collar ensure water-tightness up to a water column of 50 m after tightening of the stainless steel fastening straps.Assembly clean pipe surface if necessary slide on the sealing collar and fix it in the centre of the concrete/wall tighten the fastening straps

VIBA- Rebar connection (Single row)

Rebar connector VIBA made of galvanized, structured and sheet housing for perfect connection with concrete and to transfer the shear forces. Rebendable structural steel BST 550 with Austrian certificate (BST 500 on request available). Standard - Elementlength 125 cm. Shorther lengths on request For special types just send us the filled datasheets. We would be happy to create you an exclusive offer.

Formwork oil Prägnit ST300

Tested formwork oil suitable for all formworks. Good degradable with certificate Mixture of mineral oil and plant-based oil Apply a thin layer for best effect with protection of the formwork. No cleaning of the formwork neccessary. Degredable for 81% within 21 days.

Lower-Prop head, galvanised

Suitable for props for hole Ø 40 mm. For wood formwork beams H 20