Properties
| Durchmesser in mm: | 10 mm |
|---|---|
| Länge in mm: | 100 mm |
| Material: | GFK |
Formwork stop GFK conrete grey
Product number:
65ERP10100GFKS
Description
Formwork stop made of fibreglass. Pins Ø: 10 mm; Length: 100 mm
ADVANTAGES:
- Non-corrosive
- High strength and stable
- Chemical resistance
- Fast and easy installation
INSTALLATION:
Mark the position of the formwork with a snap line. Drill periodically holes with a diameter of 10mm along the marking. ATTENTION: Please consider the length of the pins.
Properties
| Durchmesser in mm: | 10 mm |
|---|---|
| Länge in mm: | 100 mm |
| Material: | GFK |
Downloads "Formwork stop GFK conrete grey"
Skip product gallery
Ähnliche Artikel
Formwork stop block
For fixing the formwork in the lower area.
PVC block: This stop is attached off-center with a steel nail and adjusted by turning, then fixed in the center.
Log in to see more information
Formwork stop round with nail
For fixing the formwork in the lower area.
PVC formwork stop with nail: With pre-assembled steel nail for quick assembly. Suitable for standard nail guns.
Log in to see more information
Skip product gallery
Customers also viewed
Formwork stop round with nail
For fixing the formwork in the lower area.
PVC formwork stop with nail: With pre-assembled steel nail for quick assembly. Suitable for standard nail guns.
Log in to see more information
Formwork stop round
For fixing the formwork in the lower area.
PVC block: This stop is attached off-center with a steel nail and adjusted by turning, then fixed in the center.
Log in to see more information
Uni Concrete Sleeve Ø 15 mm Three-Piece PA66GF30
Anchor sleeve UNI Ø 15 mm three-part made of PA66GF30
With internal winch for Ø 15 mm Dywidag tie rod.
Ideal use for fastening slab edge formwork, consoles, scaffolding, guardrails, etc.
Permissible load 28KN
Log in to see more information
Strukturmatten / Matrizen für Betonwand
Textured formliners from Schalbau Vitzthum in various designs for your exposed concrete wall. The mats can be attached to the formwork either with glue or nails.
Processing instructions in the download tab.
Tolerance range length and width +/- 2.0 mm
Spacer tubes with a roughened surface
Spacer tubes with a roughened surface from Ø 20mm to Ø 40 mm in bundlesØ 20mm to Ø 22mm 100 running meters per bundleØ 26mm to Ø 32mm 50 running meters per bundleØ 40mm 30 running meters per bundle
Log in to see more information
VIBA - Rebar connection (Double row) type M
Metal box with rough surface.The surface polishing ensures a good connection with concrete and supports the transfer of shear forces.
Rebendable structural steel BST550 with Austrian certificate. (BST 500 on request)
Technical data:
Standard - Elementlength 125 cm.Box heigth h1 = 3 cm;
Other types on request.
By Special types just fill the attached datasheet and send it to us per mail or fax.
Log in to see more information
Bbinding wire bare MAX-TW1061T
Binding wire bare MAX-TW1061T for RB 441T.
Log in to see more information
Bauschutzmatte Gummigranulat
Unsere Bauschutzmatte ist eine Gummimatte, welche in Rollen geliefert und zur Ausführung von schwimmenden Estrichen verwendet wird. Die Verwendung von hoch elastischen Polymerbindemitteln und der spezifischen Auflagefläche ermöglichen eine erstklassige und langfristig garantierte Dämmung von Trittschall. Die Matte wird aus Gummigranulat von recycelten Autoreifen und einer auf edlen Polymeren basierenden Bindematrix hergestellt. Die Matte wird mit der glatten Seite nach oben und der rauhen Seite nach unten verlegt.
Verarbeitung:
Den zu dämmenden Unterboden reinigen und eventuelle Unebenheiten beseitigen.
Die Bauschutzmatte Gummigranulat mit der glatten Seite nach oben ausrollen.
Die Fugen stumpf stoßen und mit einem Klebeband verkleben.
VIBADISTANZ spacer tube (VDZ) incl. 2 plugs
One-piece formwork spacer tube with two sealing plugs, ensuring the specified wall thickness reliably.
Spacer tube / cone system tested for watertightness up to 5 bar
Fire resistance tested in accordance with EN 1363-1
Complies with the requirements of the W1 guideline
Log in to see more information
Skip product gallery
Customers also bought
Spacer tubes with a roughened surface
Spacer tubes with a roughened surface from Ø 20mm to Ø 40 mm in bundlesØ 20mm to Ø 22mm 100 running meters per bundleØ 26mm to Ø 32mm 50 running meters per bundleØ 40mm 30 running meters per bundle
Log in to see more information
Plugs Vibadistanz Ø 22 mm
Material HDPE.
Appropriate for tubes with an outer diameter of 22 mm
Log in to see more information
Faserbeton-Klötze Knochen
Made of fibre concrete for horizontal and vertical reinforcement.
Log in to see more information
Concrete screw - Multi-Monti
Verzinkte patentierte Betonschraube mit Sechskant und Flansch ETA-15/0784 und 15/0785 Zulassung- Zwei Einschraubtiefen — Ein echtes Plus für mehr Flexibilität und Wirtschaftlichkeit (alle Hinweise dazu auf der Verpackung)
Neuer Schraubenkopf:
Sechskantkopf mit angepresster Scheibe
Kopfprägung MMS+
Erhöhung des Gewindeaußendurchmessers:
Größere hinterschnittene Fläche durch das Gewinde im Beton
Optimierte Tragfähigkeit im Beton
Überarbeitete Funktionsspitze:
Stärkere Verzahnung und größerer Außendurchmesser der Spitze
Größerer Hinterschnitt
Geringeres Verschleißverhalten der Funktionsspitze
Weniger Verschleiß beim Einschrauben
Hoher Montagekomfort – geringe Montagedrehmomente
Für Befestigungen in Beton nach ETA-15/0784 und ETA-15/0785
Log in to see more information
spacers with nail holes made of plastic
spacers made of impact-resistant material for breaking edges on square columns and beams, but also for decorating large exposed concrete parts.
Provide nail holes every 10-15 cm for fastening.
Log in to see more information