Formwork stop block

Product number: 65ERP

Price on request

Stück

Stk

Description

For fixing the formwork in the lower area.

PVC block: This stop is attached off-center with a steel nail and adjusted by turning, then fixed in the center.

Zubehör

Eisennägel

Eisennagel- sparen Zeit und schonen die Schalung.

Ähnliche Artikel

Formwork stop round

For fixing the formwork in the lower area. PVC block: This stop is attached off-center with a steel nail and adjusted by turning, then fixed in the center.

Formwork stop GFK conrete grey

Formwork stop made of fibreglass. Pins Ø: 10 mm; Length: 100 mm ADVANTAGES: Non-corrosive High strength and stable Chemical resistance Fast and easy installation INSTALLATION: Mark the position of the formwork with a snap line. Drill periodically holes with a diameter of 10mm along the marking. ATTENTION: Please consider the length of the pins.

Customers also viewed

Bauschutzmatte Gummigranulat

ZZ-batten

Skidproofed and tilt secured spacer for the bottom reinforcement. There will be no shrinking as the concrete encloses the batten completly. Due to the special form a linear interruption can be avoided. Mill lenghts 200 cm. Other lenghts available.

Rundfix (PVC-free)

PVC- free spacers for vertical reinforcement.

spacers with nail holes made of plastic

spacers made of impact-resistant material for breaking edges on square columns and beams, but also for decorating large exposed concrete parts. Provide nail holes every 10-15 cm for fastening.

VIBA - aerial work platform type 2000 galv. Height max. 2 m

with control element 230 Vload capacity 3t Technical specifications: 800 kg / m², max. 3000 kg, pull-outs max. 125 kg stepless from 0.4 - 1.99 m (without wheelset) Platform size: 1.68 x 3.16 - 5.16 m

Montagekleber mit Anfangshaftung

Leistungsstarker Montagekleber (Kartusche á 450g) mit sofortiger Anfangshaftung. Frei von Isocyanat und Silicon. Dauerelastisch und universell einsetzbar. Geruchlos. Zur Verarbeitung mit allen gängigen Dosierpistolen.

Baustütze - Mini (DC)

With covered thread (DC). Headplate: 120 x 120 x 5 mm, with borehol ø 40 mm G-hook: Ø 12 mm (no loosing) with bearing ring (loose) Failure loads tested at concentric load, pay attention to security factor!

Replacement blade for miter scissors

ZZ-batten

SBA basket

These spacer-baskets are situated between the upper and the lower reinforcment panels. They don't sit on the formwork (no plastic feet), therefore a proper exposed concrete can be arised.Packing units: big band at 800, 600, 400, 200 pieces, small band at 10 pieces.