Properties
| Material: | PE (Polyethylen) |
|---|---|
| Rohr ø in mm: | 22 mm |
| Tube length: | 50 m |
Compressible PE Spiral Spacer Pipe 22/28
Description
The flexible, compressible PE Spiral Spacer Tube 22/28 has been specially developed for use in challenging formwork conditions. The spiral tube can be used in combination with a plastic spacer tube or an FB wall thickness spacer.
It provides a practical and adaptable solution, particularly for single-sided formwork, uneven surfaces, and irregular tie rod positions, such as those encountered on rock faces or in excavation pits.
Thanks to its special spiral structure, the tube can be compressed by applying axial pressure, allowing it to adapt flexibly to different spacing requirements. At the same time, it offers greater rigidity than conventional PE tubes. This makes it easier to unscrew and remove the formwork tie rod after concreting.
Another advantage is the ease of adjusting its length: the spiral spacer tube can be cut to the required length directly on the construction site, even during formwork assembly, using a suitable cutting tool. With an internal diameter of 22 mm, the spiral tube is designed for use with Ø15 mm formwork tie rods.
Properties
| Material: | PE (Polyethylen) |
|---|---|
| Rohr ø in mm: | 22 mm |
| Tube length: | 50 m |
Zubehör
The pressure cones are attached to the spacer tube. After concreting, the pressure cones are removed from the concrete and can be reused.
Plastic engagement to connect spreader and concrete tubes.
Cones made of plastic, suitable for tube struts with a inner diameter of 22 mm respectively 26 mm. The remaining conical openings, after removing the pressure cones, are sealed with conrecte cones 40/5 and sealing adhesive. Pressure cones are reuseable.
Ähnliche Artikel
Spacer tubes with a roughened surface from Ø 20mm to Ø 40 mm in bundles. Standard length is 2,0 metre. Ø 20mm to Ø 22mm 100 running meters per bundle Ø 26mm to Ø 32mm 50 running meters per bundle Ø 40mm 30 running meters per bundle
Spacer tube with a roughened surface and an inner diameter of 22 mm. The roughened surface ensures improved adhesion to concrete. Chemical Resistance: Mineral oils (aromatic-free) Motor oils
Customers also viewed
Planstand Ausführung PROFI 145 von ihrem zuverlässigen Partner. Hochwertige, stabile, verschweißte und feuerverzinkte Ausführung (Q-Rahmen). Transport im leeren Zustand mit Stapler oder Kran möglich. Eigenschaften: Heller Innenraum (Rückwand aus lichtdurchlässigen PVC-Doppelstegplatten). Obere Klappe aufklappbar, geöffnet als Vordach (Sonne- und Regenschutz), abschließbar. Untere Klappe läuft nach innen, abschließbar. Dach-Innenseite mit Anti-Tropffolie beklebt. Große Arbeitsplatte aus wasserfester Mehrschichtplatte mit Kabeldurchdringungen für Stromversorgung. Zusätzlicher Winkel im Dachbereich (für Magnete). Ablagefach hinten über komplette Breite, seitliche Fächer für evtl. Pläne etc. 5-fach-Steckdosenleiste (schaltbar). LED-Unterbauleuchte (schaltbar).
Spacer tubes with a roughened surface from Ø 20mm to Ø 40 mm in bundlesØ 20mm to Ø 22mm 100 running meters per bundleØ 26mm to Ø 32mm 50 running meters per bundleØ 40mm 30 running meters per bundle
Plastic basement windows Sash and frame made of high quality plastic Color white circumferential rubber seal Turn / tilt fitting Double glazing
Spacer tube with a roughened surface and an inner diameter of 22 mm. The roughened surface ensures improved adhesion to concrete. Chemical Resistance: Mineral oils (aromatic-free) Motor oils
One-piece formwork spacer tube with two sealing plugs, ensuring the specified wall thickness reliably. Spacer tube / cone system tested for watertightness up to 5 bar Fire resistance tested in accordance with EN 1363-1 Complies with the requirements of the W1 guideline
One-piece formwork spacer tube with two sealing plugs, ensuring the specified wall thickness reliably. Spacer tube / cone system tested for watertightness up to 5 bar Fire resistance tested in accordance with EN 1363-1 Complies with the requirements of the W1 guideline
uPVC Basement Window – Triple-Glazed Sash and frame made of high-quality uPVC Colour: White Continuous rubber seal Tilt-and-turn hardware Available in left-hand or right-hand opening Note: Existing window sashes can be replaced with triple-glazed sashes at a later stage to improve the thermal insulation performance.
One-piece formwork spacer tube with two sealing plugs, ensuring the specified wall thickness reliably. Spacer tube / cone system tested for watertightness up to 5 bar Fire resistance tested in accordance with EN 1363-1 Complies with the requirements of the W1 guideline
One-piece formwork spacer tube with two sealing plugs, ensuring the specified wall thickness reliably. Spacer tube / cone system tested for watertightness up to 5 bar Fire resistance tested in accordance with EN 1363-1 Complies with the requirements of the W1 guideline
uPVC Basement Window – Triple-Glazed Sash and frame made of high-quality uPVC Colour: White Continuous rubber seal Tilt-and-turn hardware Available in left-hand or right-hand opening Note: Existing window sashes can be replaced with triple-glazed sashes at a later stage to improve the thermal insulation performance.