Spacer tubes with a roughened surface from Ø 20mm to Ø 40 mm in bundles. Standard length is 2,0 metre.
Ø 20mm to Ø 22mm 100 running meters per bundle
Ø 26mm to Ø 32mm 50 running meters per bundle
Ø 40mm 30 running meters per bundle
One-piece formwork spacer tube with two sealing plugs, ensuring the specified wall thickness reliably.
Spacer tube / cone system tested for watertightness up to 5 bar
Fire resistance tested in accordance with EN 1363-1
Complies with the requirements of the W1 guideline
Material: Wood concrete slab
Element - Length: 1600 mm, other lengths on requestMaterial - Thickness: 10 or 14 mm
Advantages:
lost formwork doesn't have to be removed from the concrete
easy mounting through screws or nails (light nailing)
Time saving
Optimum connection with concrete through 7 fixing strips by an element length of 1600 mm
Fixing strips is made of the same material as VIBA shuttering board
Material: Wood concrete slab
Element - Length: 1600 mm, other lengths on requestMaterial - Thickness: 10 or 14 mm
Advantages:
lost formwork doesn't have to be removed from the concrete
easy mounting through screws or nails (light nailing)
Time saving
Optimum connection with concrete through 7 fixing strips by an element length of 1600 mm
Fixing strips is made of the same material as VIBA shuttering board
Super segment ring technology for cables and pipes
Open the pipe seal. Cut into the selected segment rings at the predetermined separation point with a sharp knife and tear off
5 segment rings with a diameter of 25 - 63 mm
segment ring
Pipe area
Plug
Ø 25 - 28 mm
Nr. 1
Ø 32 mm
Nr. 2
Ø 40 mm
Nr. 3
Ø 50 mm
Nr. 4
Ø 63 mm
CEM805 is a one-component, neutral-odor sealing and bonding compound based on MS hybrid polymer technology. It is solvent-free, silicone-free and isocyanate-free, cures neutrally, is paint-compatible, weather-resistant and offers good chemical resistance.
Applications:Contact adhesive CEM805 is used as a system sealant and installation adhesive for hydrophilic waterstops, joint sealing sheets and concrete plugs.
Typical applications include:
Sealing and bonding in concrete construction for interior and exterior use
Tested for watertightness up to 5.0 bar hydrostatic water pressure (= 50 m water column) in the DualProof System (PVC-P), at product transitions and on concrete surfaces
Crack-bridging up to 2.50 mm down to -35°C (crack-bridging class A5)
Crack-bridging sealant up to 50 m water column
Suitable for use on plaster, gypsum, ceramic, glass, wood, metal and various plastic substrates, as well as galvanized steel and aluminum
Well suited for bonding construction foils and membranes
Suitable for sealing and bonding applications requiring silicone-free systems on site
Butt joint bonding of SilverSeal using CEM805 has been tested and proven watertight up to 2.5 bar (= 25 m water column) Hydrophilic joint tapes (Art. No. 61L) and swelling rubber profiles can be installed in a backflow-proof manner with CEM805 in accordance with German general building authority approval (abP) Also suitable for use with fresh concrete bonded waterproofing systems and joint sealing metal sheets.
Note: Do not apply on substrates such as bitumen, tar or coatings that may cause incompatibilities and plasticizer migration. Standards and certification CEM805 contact adhesive is tested as a sealant in accordance with EN 15651-1 and certified as EC1Plus according to EMICODE.
Product features and advantages:
Ready-to-use MS polymer installation adhesive and sealant, free of silicone, isocyanates and solvents, with a broad adhesion spectrum
Elastic
Non-corrosive
Neutral odor
Weathering and aging resistant
Good UV resistance
Virtually no shrinkage
No bubble formation
Paint-compatible
spacers made of impact-resistant material for breaking edges on square columns and beams, but also for decorating large exposed concrete parts.
Provide nail holes every 10-15 cm for fastening.
WELLO, the lining tube made of PE with an all-round swelling coating.
The tube is smooth inside. The undulating outside clings to the concrete. Two swelling tapes applied around the center also prevent water from entering the structure
Wello casing, double security through corrugation and swelling tape, sealing by means of an annular seal. Tested up to 30m water column.
WELLO, the lining tube made of PE with an all-round swelling coating.
The tube is smooth inside. The undulating outside clings to the concrete. Two swelling tapes applied around the center also prevent water from entering the structure
Wello casing, double security through corrugation and swelling tape, sealing by means of an annular seal. Tested up to 30m water column.
WELLO, the lining tube made of PE with an all-round swelling coating.
The tube is smooth inside. The undulating outside clings to the concrete. Two swelling tapes applied around the center also prevent water from entering the structure
Wello casing, double security through corrugation and swelling tape, sealing by means of an annular seal. Tested up to 30m water column.
