Properties
| Ausführung: | verzinkt |
|---|---|
| Breite: | 1450 mm |
| Höhe: | 2060 mm |
| weight: | 186 kg |
Planstand Profi 145 x 93 x 206 cm
Properties
| Ausführung: | verzinkt |
|---|---|
| Breite: | 1450 mm |
| Höhe: | 2060 mm |
| weight: | 186 kg |
Ähnliche Artikel
Planstand Ausführung PROFI 200 von ihrem zuverlässigen Partner. Hochwertige, stabile, verschweißte und feuerverzinkte Ausführung (Q-Rahmen). Transport im leeren Zustand mit Stapler oder Kran möglich. Eigenschaften: Heller Innenraum (Rückwand aus lichtdurchlässigen PVC-Doppelstegplatten). Obere Klappe aufklappbar, geöffnet als Vordach (Sonne- und Regenschutz), abschließbar. Untere Klappe läuft nach innen, abschließbar. Dach-Innenseite mit Anti-Tropffolie beklebt. Große Arbeitsplatte aus wasserfester Mehrschichtplatte mit Kabeldurchdringungen für Stromversorgung. Zusätzlicher Winkel im Dachbereich (für Magnete). Ablagefach hinten über komplette Breite, seitliche Fächer für evtl. Pläne etc. 5-fach-Steckdosenleiste (schaltbar). LED-Unterbauleuchte (schaltbar).
Customers also viewed
The flexible, compressible PE Spiral Spacer Tube 22/28 has been specially developed for use in challenging formwork conditions. The spiral tube can be used in combination with a plastic spacer tube or an FB wall thickness spacer. It provides a practical and adaptable solution, particularly for single-sided formwork, uneven surfaces, and irregular tie rod positions, such as those encountered on rock faces or in excavation pits. Thanks to its special spiral structure, the tube can be compressed by applying axial pressure, allowing it to adapt flexibly to different spacing requirements. At the same time, it offers greater rigidity than conventional PE tubes. This makes it easier to unscrew and remove the formwork tie rod after concreting. Another advantage is the ease of adjusting its length: the spiral spacer tube can be cut to the required length directly on the construction site, even during formwork assembly, using a suitable cutting tool. With an internal diameter of 22 mm, the spiral tube is designed for use with Ø15 mm formwork tie rods.
Plastic basement windows Sash and frame made of high quality plastic Color white circumferential rubber seal Turn / tilt fitting Double glazing
With internal round steel stirrups.Prevents the belt from bending during the concreting process. Typ a (width) b c f 61AS200 200 mm 70 mm 3,5 mm 15 mm 61AS250 240 mm 80 mm 3,5 mm 15 mm 61AS320 320 mm 100 mm 4,0 mm 15 mm Material: soft PVC; other materials on request!
uPVC Basement Window – Triple-Glazed Sash and frame made of high-quality uPVC Colour: White Continuous rubber seal Tilt-and-turn hardware Available in left-hand or right-hand opening Note: Existing window sashes can be replaced with triple-glazed sashes at a later stage to improve the thermal insulation performance.
Spacer tube with a roughened surface and an inner diameter of 22 mm. The roughened surface ensures improved adhesion to concrete. Chemical Resistance: Mineral oils (aromatic-free) Motor oils
Mobile fences are robust, versatile fence-system for short run and effective hedge for building sites and events. The elements with circumferential frame can be connected with the hooks - loops system. The length of the Standard elements = 342 cm.
One-piece formwork spacer tube with two sealing plugs, ensuring the specified wall thickness reliably. Spacer tube / cone system tested for watertightness up to 5 bar Fire resistance tested in accordance with EN 1363-1 Complies with the requirements of the W1 guideline
One-piece formwork spacer tube with two sealing plugs, ensuring the specified wall thickness reliably. Spacer tube / cone system tested for watertightness up to 5 bar Fire resistance tested in accordance with EN 1363-1 Complies with the requirements of the W1 guideline
Formwork spacer tube "made of one piece" with two sealing plugs. Secure the wall thickness reliably! Material: HDPE
Plastic basement windows Sash and frame made of high quality plastic Color white circumferential rubber seal Turn / tilt fitting Double glazing