Skip to main content Skip to search Skip to main navigation Skip to B2B platform navigation
Filter products
Variants

With the help of our variant list you can find your article faster and easier.

Product Nr.
Product
Abmessung in mm
Ausführung
78C078058A3
Plastic Window – Triple Glazed Insulating Glass
780 x 580 mm
Anschlag rechts
78C078058A3L
Plastic Window – Triple Glazed Insulating Glass
780 x 580 mm
Anschlag links
78C098058A3
Plastic Window – Triple Glazed Insulating Glass
980 x 580 mm
Anschlag rechts
78C098058A3L
Plastic Window – Triple Glazed Insulating Glass
980 x 580 mm
Anschlag links
78C098078A3
Plastic Window – Triple Glazed Insulating Glass
980 x 780 mm
Anschlag rechts
78C098078A3L
Plastic Window – Triple Glazed Insulating Glass
980 x 780 mm
Anschlag links
78C098098A3
Plastic Window – Triple Glazed Insulating Glass
980 x 980 mm
Anschlag rechts
78C098098A3L
Plastic Window – Triple Glazed Insulating Glass
980 x 980 mm
Anschlag links
78C123098A3
Plastic Window – Triple Glazed Insulating Glass
1230 x 980 mm
Anschlag rechts
78C123098A3L
Plastic Window – Triple Glazed Insulating Glass
1230 x 980 mm
Anschlag links
Skip product gallery

Customers also viewed

Compressible PE Spiral Spacer Pipe 22/28

The flexible, compressible PE Spiral Spacer Tube 22/28 has been specially developed for use in challenging formwork conditions. The spiral tube can be used in combination with a plastic spacer tube or an FB wall thickness spacer. It provides a practical and adaptable solution, particularly for single-sided formwork, uneven surfaces, and irregular tie rod positions, such as those encountered on rock faces or in excavation pits. Thanks to its special spiral structure, the tube can be compressed by applying axial pressure, allowing it to adapt flexibly to different spacing requirements. At the same time, it offers greater rigidity than conventional PE tubes. This makes it easier to unscrew and remove the formwork tie rod after concreting. Another advantage is the ease of adjusting its length: the spiral spacer tube can be cut to the required length directly on the construction site, even during formwork assembly, using a suitable cutting tool. With an internal diameter of 22 mm, the spiral tube is designed for use with Ø15 mm formwork tie rods.

Kunststoff - Fenster ohne Schalung DKI

Plastic basement windows Sash and frame made of high quality plastic Color white circumferential rubber seal Turn / tilt fitting Double glazing

Plastic Window – Triple Glazed Insulating Glass

uPVC Basement Window – Triple-Glazed Sash and frame made of high-quality uPVC Colour: White Continuous rubber seal Tilt-and-turn hardware Available in left-hand or right-hand opening Note: Existing window sashes can be replaced with triple-glazed sashes at a later stage to improve the thermal insulation performance.

Kunststoff - Fenster ohne Schalung DKI

Plastic basement windows Sash and frame made of high quality plastic Color white circumferential rubber seal Turn / tilt fitting Double glazing

Kunststoff - Fenster ohne Schalung DKI

Plastic basement windows Sash and frame made of high quality plastic Color white circumferential rubber seal Turn / tilt fitting Double glazing

Spacer tubes 22/26 mm

Spacer tube with a roughened surface and an inner diameter of 22 mm. The roughened surface ensures improved adhesion to concrete. Chemical Resistance: Mineral oils (aromatic-free) Motor oils

Kunststoff-Kellerfenster in Holzschalung TYPE DKI

Wooden formwork: chipboard coated on both sides Tilt & Turn window Color white Insulating glazing U-value 1.1 single-leaf Stop right or left

Sperrholz - Platten, Glatt - Glatt Birke

The both sided coat gives these panels high resistance against weather, liquids, etc. Structure: cross-banded construction Gluing: cook and weather-resistant Surface: phenolic coating edge sealed other forms and thicknesses on request

Spacer tubes with a roughened surface

Spacer tubes with a roughened surface from Ø 20mm to Ø 40 mm in bundlesØ 20mm to Ø 22mm 100 running meters per bundleØ 26mm to Ø 32mm 50 running meters per bundleØ 40mm 30 running meters per bundle

Fiber cement wall sleeves

The fiber cement wall sleeves are available for immediate delivery from DN 80 to DN 600. The tube is smooth on the inside and roughened on the outside. Because the undulating outside connects with the concrete no water circulation occurs.