Form bar, galvanized
Description
The allowed distance e of the form bars depends on the thickness of the ceiling:
by d < 20 cm: permitted e = 150 cm
by d = max D = 30 cm: permitted e = 75 cm
- Height of the bar: 100 cm
- Height overall: 130 cm
Customers also viewed
Easy device for shuttering of ceiling etc.Mounting on the walls with any turnbuckle or threaded rod.Height adjustable through longitudinal slot. Time saving Easy handling No Wood surplus
Equipment: Tank with 240 l volume and with splash guard flap WC with re-circulating flush Washbasin Urinal Two roll holder Crane hook Mirror Coat hooks Self-closing door Padlock Possible ground anchor Dimension:Height ca. 240 cmWidth ca. 120 cmDeep ca. 120 cmWeight: ca. 85 kgMaterial: PolyethylenTank volume: 240 L
Slab edge shuttering and insulation in one. 50 mm extruded polystyrene. Foot is made of 4mm fibre cement (Width 10 cm) Elements with tongue and groove. Standard in 1 or 2 metre elements, other lengths on request.
Pull out lever to remove the end of spacer after stripping the formwork. Suitable for normal and exposed concrete.
Slab edge shuttering and insulation in one. 50 mm extruded polystyrene. Foot is made of 4mm fibre cement (Width 10 cm) Elements with tongue and groove. Standard in 1 or 2 metre elements, other lengths on request.
The distance stripes are situated between the upper and lower reinforcement panel as well as between the external and internal reinforcement wall. They don t sit on the formwork (no plastic feet) therefore, a proper exposed concrete can be arised. Packing units: big band at 1.000 pcs., band at 200 pcs., small band at 25 pcs.
Die Maschine ist zum Biegen von Stahl-/Bewehrungsmaterial bestimmt. Das Material wird in den vorgesehenen Bügelkopf eingelegt. Mithilfe des Biegebolzens kann das Material sowohl im Manuell- als auch im Automatik-betrieb durch Betätigen des Fußschalters gebogen werden. Es sind bis zu 9 Biegesequenzen programmier- und die Winkel über die Steuerstifte einstellbar. StahlN/mm² Durchmesser mm / Anzahl der Stäbe 450 Ø 20 x 1 Ø 14 x 2 Ø 12 x 3 Ø 10 x 4 650 Ø 16 x 2 Ø 12 x 2 Ø 10 x 3 Ø 8 x 5 850 Ø 14 x 1 Ø 10 x 2 Ø 8 x 2 Ø 6 x 6
Railing holder type S is screwed into the concreted anchor case or the corner adapter, e.g. in balcony plates, bridge cornices, ceiling edges, cantilever plates...All board holders are swivelling around 360°.The corner adapter is screwed laterally into the anchor case and is fixed with the anchor tie groove to the construction unit.Ideal for stair cheeks or cantilever plates in those a fastening of the railing is only laterally possible.
Stabile version from forming tube, outside 40 x 40 mm, inside 35 x 35 mm. Easy adjustment by dint of inlying threaded spindle (Dywidag-spindle 15 mm) High security. Simple assembly.
Rebar Bending Machine up to max. Ø 30 mm (R55). Bending capacity approx. 11 bends/min at R55. The machine can be programmed for up to 6 bends.Angle adjustment is carried out using pins. Standard Equipment: 1 hardened square pin 1 hardened stirrup bending pin 3 hardened bushing retaining pins 1 side plate 1 foot pedal control 5 bushings Ø 50–60–70–80–95 mm 1 set of hex keys (Allen keys) SteelQty. SteelR55Ø mm 1 30 2 22 3 18 5 10