WC - Box Chemical Plastic

WC - Box Water galvanized

Equipment: 1 x Flushing cistern (for channel interface) 1 x Paper holder 1 x Towel rack 1 x Coat hook 1 x Mirror 1 x Washbasin with soap placer connection possibility Cold water with sewage disposal External dimension:1,18 x 1,18 m, Height 2,40 m Structure:Frame structure (floor, corners and roof) made of galvanized and painted sheet steel profiles, light grey (white RAL 9002) Other structuring or equipment possible (e.g. heating unit) on request.

Rebar spacer CLOSED

Spacing strip to use on soft underground. Mill length: 200 cm. Other lenghts available. (PVC - free by request)

Rebar spacer CLOSED

Spacing strip to use on soft underground. Mill length: 200 cm. Other lenghts available. (PVC - free by request)

Construction site door

Burglars often have an easy job on unprotected construction sites. The biggerand the more complex the objects, the easier it is to break. Vandalism in the shelland construction phase often leads to considerable damage and additionalcosts and time delays. There is effective protection against such damage. It isinexpensive and can be installed in a few minutes: the construction site door with the unique quick spindle adjustment!Robust, durable and maintenance-free. For more security in the shell and construction phase Door sizes (OVL and OVL-SI)Building dimensions: width 860 to 1180 mm, height 1980 to 2192 mmClear passage width 750 mm, height 1930 mm Door elementReady-to-install, single-leaf door elements for multiple use(portable). Door leafDouble-walled, sheet thickness 40 mm thick, rebated on 3 sides (thick rebate) withclose-meshed honeycomb inlay that is glued over the entire surface to door shells. FramesSheet steel, 1.5 mm thick, with stabilizing beading.Lower fastening through anchoring holes, which make it easyEnsure installation and removal. An optional seal ensures quiet closing. surfaceOptimal corrosion protection for door leaves, frames, hinges and spindles thanks to galvanized material. Fuse2 lever-proof hinges and 1 solid safety bolt on the hinge side. Handle setPlastic round handle set black with steel core. Castle (OVL)Security lock with profile half cylinder, 3 keys. Equipment pluses of the OVL-Si:Door leaf and frame with additional steel reinforcementSecurity: 2 additional security elements on the lock side.Lock: Flush profile cylinder, drilling and pulling protected, 3 keys

Stopper in Ø 22 mm

Mit dem Stopper IN Type 22 (für Ø 21,5 - 23mm) können Mauerstärken aus Faserzement und Kunststoff innen druckdicht verschlossen werden. Beständigkeit: Wasser, UV, Ozon, verdünnte Säuren + Laugen, Gülle + Jauche, Gärungsmaische, Öle + Bitumen, Radon + Methangas, Temperaturbereich - 35 bis + 70 °C Material TPE Druckprüfung nach beidseitigem Verschluss der Faserbetonrohre: Wasserdicht bis 3 bar, Druckprüfung MFPA Leipzig Erweiterte Druckprüfung von 21,5 bis 23,0 mm Prüfzeugnis für den Stopfen zur Abdichtung in Rohrinnenseite. Bitte Einbauanleitung für Stopper anfordern und beachten. Brandprüfung: Feuerwiderstandsklasse E1 120 nach DIN EN 13501-2 mit Faserbetonmauerstärken Klassifikation DIN EN 13501-1 E = normalentflammbar DIN EN 4102-1 B2 = normalentflammbar Schallschutzprüfung: Stopper „IN“ 22 ist Schallschutzgeprüft

Stopper maxi mit Konusverschluss Ø 22 mm

Mit dem Stopper können Mauerstärken aus Faserzement und Kunststoff innen druckdicht verschlossen werden. Beständigkeit: Wasser, UV, Ozon, verdünnte Säuren + Laugen, Gülle + Jauche, Gärungsmaische, Öle + Bitumen, Radon + Methangas, Temperaturbereich - 35 bis + 70 °C Material TPE Druckprüfung nach beidseitigem Verschluss der Faserbetonrohre: Wasserdicht bis 3 bar, Druckprüfung MFPA Leipzig Erweiterte Druckprüfung von 21,5 bis 23,0 mm Prüfzeugnis für den Stopfen zur Abdichtung in Rohrinnenseite. Bitte Einbauanleitung für Stopper anfordern und beachten.Brandprüfung: Feuerwiderstandsklasse E1 120 nach DIN EN 13501-2 mit Faserbetonmauerstärken Klassifikation DIN EN 13501-1 E = normalentflammbar DIN EN 4102-1 B2 = normalentflammbar

Thumb nut

Galvanised accomplishment suitable for tie rod Ø 12,5mm, Ø 15mm, Ø 20mm, Ø 26,5mm

Stopper in Ø 26 mm

Mit dem Stopper IN Type 26 (für Ø 26mm) können Mauerstärken aus Faserzement und Kunststoff innen druckdicht verschlossen werden. Beständigkeit: Wasser, UV, Ozon, verdünnte Säuren + Laugen, Gülle + Jauche, Gärungsmaische, Öle + Bitumen, Radon + Methangas, Temperaturbereich - 35 bis + 70 °C Material TPE Druckprüfung nach beidseitigem Verschluss der Faserbetonrohre: Wasserdicht bis 3 bar, Druckprüfung MFPA Leipzig Prüfzeugnis für den Stopfen zur Abdichtung in Rohrinnenseite. Bitte Einbauanleitung für Stopper anfordern und beachten. Brandprüfung: Feuerwiderstandsklasse E1 120 nach DIN EN 13501-2 mit Faserbetonmauerstärken Klassifikation DIN EN 13501-1 E = normalentflammbar DIN EN 4102-1 B2 = normalentflammbar Schallschutzprüfung: Stopper „IN“ 26 ist Schallschutzgeprüft

Speedies Bar Spacer 20 mm

Application: For concreting floors or concrete slabs as spacers of the lower preservation. Furthermore, the Speedies surface spacers can also be used very well in the concrete precast plant due to the pointed feet. Your advantage: Material polypropylene PP Pressure resistant / Very high stability Ergonomic Transport optimized (europallet) Consumption approx. 1-1,5 pcs./m² Product is patent pending MPA-tested

Contact adhesive CEM 805 for swelling waterstop and joint sealing strip

CEM805 is a one-component, neutral-odor sealing and bonding compound based on MS hybrid polymer technology. It is solvent-free, silicone-free and isocyanate-free, cures neutrally, is paint-compatible, weather-resistant and offers good chemical resistance. Applications:Contact adhesive CEM805 is used as a system sealant and installation adhesive for hydrophilic waterstops, joint sealing sheets and concrete plugs. Typical applications include: Sealing and bonding in concrete construction for interior and exterior use Tested for watertightness up to 5.0 bar hydrostatic water pressure (= 50 m water column) in the DualProof System (PVC-P), at product transitions and on concrete surfaces Crack-bridging up to 2.50 mm down to -35°C (crack-bridging class A5) Crack-bridging sealant up to 50 m water column Suitable for use on plaster, gypsum, ceramic, glass, wood, metal and various plastic substrates, as well as galvanized steel and aluminum Well suited for bonding construction foils and membranes Suitable for sealing and bonding applications requiring silicone-free systems on site Butt joint bonding of SilverSeal using CEM805 has been tested and proven watertight up to 2.5 bar (= 25 m water column) Hydrophilic joint tapes (Art. No. 61L) and swelling rubber profiles can be installed in a backflow-proof manner with CEM805 in accordance with German general building authority approval (abP) Also suitable for use with fresh concrete bonded waterproofing systems and joint sealing metal sheets. Note: Do not apply on substrates such as bitumen, tar or coatings that may cause incompatibilities and plasticizer migration. Standards and certification CEM805 contact adhesive is tested as a sealant in accordance with EN 15651-1 and certified as EC1Plus according to EMICODE. Product features and advantages: Ready-to-use MS polymer installation adhesive and sealant, free of silicone, isocyanates and solvents, with a broad adhesion spectrum Elastic Non-corrosive Neutral odor Weathering and aging resistant Good UV resistance Virtually no shrinkage No bubble formation Paint-compatible

WC - Box Chemical Plastic

Description