Go to homepage
Catalogue
Wishlist
Request Basket
Skip image gallery

Properties

Medium pipe Ø: 110 - 112 mm
Verstellbereich in mm: 110 - 112 mm
ø in mm: 150 mm

Ringraumdichtung Basic 1 - Dichtungsbreite 40 mm

Product number: 61LXNC150ND110

Available, delivery time: 1-3 days

Medium pipe Ø
ø in mm

Price on request

Stk

Description

  • Annular seal Basic 1 made of stainless steel, V2A (material no.1.4301)
  • Seal width 40 mm for pressing water up to 2.5 bar
  • completley gastight and watertight
  • built-in torque control
  • EPDM rubber insert


DIVIDING THE RING SEAL BASIC 1

  • To split the annular seal Basic 1, loosen and remove a screw.
  • Unfold the front and rear press segment and cut the rubber press ring radially about 10 mm to the left or right of the screw hole with a sharp knife.

Properties

Medium pipe Ø: 110 - 112 mm
Verstellbereich in mm: 110 - 112 mm
ø in mm: 150 mm
Filter products
Variants

With the help of our variant list you can find your article faster and easier.

Product Nr.
Product
Medium pipe Ø
ø in mm
Price
Action
61LXNC125ND060
 Ringraumdichtung Basic 1 - Dichtungsbreite 40 mm
60 - 63 mm
125 mm
61LXNC150ND088
 Ringraumdichtung Basic 1 - Dichtungsbreite 40 mm
88 - 92 mm
150 mm
61LXNC200ND110
 Ringraumdichtung Basic 1 - Dichtungsbreite 40 mm
110 - 112 mm
200 mm
61LXNC200ND125
 Ringraumdichtung Basic 1 - Dichtungsbreite 40 mm
125 - 127 mm
200 mm
61LXNC200ND139
 Ringraumdichtung Basic 1 - Dichtungsbreite 40 mm
139 - 140 mm
200 mm
61LXNC200ND159
 Ringraumdichtung Basic 1 - Dichtungsbreite 40 mm
159 - 162 mm
200 mm
61LXNC250ND159
 Ringraumdichtung Basic 1 - Dichtungsbreite 40 mm
159 - 162 mm
250 mm
61LXNC250ND200
 Ringraumdichtung Basic 1 - Dichtungsbreite 40 mm
200 - 200 mm
250 mm
61LXNC250ND210
 Ringraumdichtung Basic 1 - Dichtungsbreite 40 mm
210 - 210 mm
250 mm
61LXNC300ND200
 Ringraumdichtung Basic 1 - Dichtungsbreite 40 mm
200 - 200 mm
300 mm
Skip product gallery

Customers also viewed

Ringraumdichtung Basic 1 - Dichtungsbreite 40 mm
Ringraumdichtung Basic 1 - Dichtungsbreite 40 mm
Annular seal Basic 1 made of stainless steel, V2A (material no.1.4301) Seal width 40 mm for pressing water up to 2.5 bar completley gastight and watertight built-in torque control EPDM rubber insert DIVIDING THE RING SEAL BASIC 1 To split the annular seal Basic 1, loosen and remove a screw. Unfold the front and rear press segment and cut the rubber press ring radially about 10 mm to the left or right of the screw hole with a sharp knife.
Ringraumdichtung Basic 1 - Dichtungsbreite 40 mm
Ringraumdichtung Basic 1 - Dichtungsbreite 40 mm
Annular seal Basic 1 made of stainless steel, V2A (material no.1.4301) Seal width 40 mm for pressing water up to 2.5 bar completley gastight and watertight built-in torque control EPDM rubber insert DIVIDING THE RING SEAL BASIC 1 To split the annular seal Basic 1, loosen and remove a screw. Unfold the front and rear press segment and cut the rubber press ring radially about 10 mm to the left or right of the screw hole with a sharp knife.
Ringraumdichtung Basic 1 - Dichtungsbreite 40 mm
Ringraumdichtung Basic 1 - Dichtungsbreite 40 mm
Annular seal Basic 1 made of stainless steel, V2A (material no.1.4301) Seal width 40 mm for pressing water up to 2.5 bar completley gastight and watertight built-in torque control EPDM rubber insert DIVIDING THE RING SEAL BASIC 1 To split the annular seal Basic 1, loosen and remove a screw. Unfold the front and rear press segment and cut the rubber press ring radially about 10 mm to the left or right of the screw hole with a sharp knife.
Ringraumdichtung P-Cable Basic HRD Ø100
Ringraumdichtung P-Cable Basic HRD Ø100
The P-Cable Basic HRD annular seal is available in various designs.The following product identification is used: SG x (number of holes) / y-z (area in which the hole can be adjusted)
Ringraumdichtung Basic 1 - Dichtungsbreite 20 mm
Ringraumdichtung Basic 1 - Dichtungsbreite 20 mm
Annular seal Basic 1 made of stainless steel, V2A (material no.1.4301) Seal width 20 mm for non-pressing water up to 1.5 bar completely gastight and watertight built-in torque control EPDM rubber insert DIVIDING THE RING SEAL BASIC 1 To divide the press seal Basic 1, loosen and remove a screw. Unfold the front and rear press segment and cut the rubber press ring radially about 10 mm to the left or right of the screw hole with a sharp knife.
Annular Seal - cable Ø 100 mm foldable
Annular Seal - cable Ø 100 mm foldable
Annular seal - 4-fold cable Ø 100 mm MR Ø 6-40 mm Tested up to 10 m WS (1 bar) Hinged Annular seal for core drilling / wall sleeves Ø 100 mm Segment ring technology for 1 cable / tube Ø 25, 32 or 40 mm as well as 3 cables Ø 6-18 mm completly gastight and watertight Sealing width 40 mm, pressure-tight up to 1 bar profile and screws made of stainless steel V2A EPDM rubber insert integrated blind plug We expressly point out that if there are deviations from the information in the assembly instructions and if our products are used improperly, no guarantee is given for any consequential damage. MR = carrier pipe. Technical changes reserved.
Ringraumdichtung Professional 2 geteilt
Ringraumdichtung Professional 2 geteilt
Eigenschaften: absolut gas- und wasserdicht geschlossen oder geteilt millimetergenau anpassbar leich motierbar optional mit überdeckendem Flansch (F) oder exzentrisch Mehrfachbelegung möglich Technische Daten: Dichtbreite 60 mm Edelstahl rostfrei V2A und V4A Gummiqualität in EPDM, NBR und mit KTW-Zulassung lieferbar für Kernbohrungen/Futterrohre von Ø 50 - 500 mm Rohrgröße bis Ø 400 mm     Kernbohrung / Futterrohr Ø mm Medium Rohr Ø mm 50 0 - 26 60 0 - 36 70 0 - 40 80 0 - 50 100 0 - 63 125 0 - 90 150 0 - 112 200 0 - 162 250 0 - 210 300 0 - 260 350 0 - 310 400 0 - 350 450 0 - 400 500 0 - 450                                              
Ringraumdichtung Basic 1 - Dichtungsbreite 40 mm
Ringraumdichtung Basic 1 - Dichtungsbreite 40 mm
Annular seal Basic 1 made of stainless steel, V2A (material no.1.4301) Seal width 40 mm for pressing water up to 2.5 bar completley gastight and watertight built-in torque control EPDM rubber insert DIVIDING THE RING SEAL BASIC 1 To split the annular seal Basic 1, loosen and remove a screw. Unfold the front and rear press segment and cut the rubber press ring radially about 10 mm to the left or right of the screw hole with a sharp knife.
Seal "onion ring" technology Ø 100 mm - divisible MR Ø 18 - 65 mm
Seal "onion ring" technology Ø 100 mm - divisible MR Ø 18 - 65 mm
Super segment ring technology for cables and pipes; 12 segment rings with a diameter of 16 - 65 mm; simply tear off the segments until they fit split design, suitable for subsequent installation Seal width 40 mm, pressure-tight up to 1 bar integrated torque control visible and tangible U-profile and screws made of stainless steel V2A EPDM rubber insert integrated blind plug
Zwiebeldichtung Basic 1
Zwiebeldichtung Basic 1
Annular seal Basic 1 made of stainless steelStainless V2A Seal width 40 mm completely gastight and watertight built-in torque control EPDM rubber insert To split the press seal Basic 1, loosen and remove a screw. Unfold the front and rear press segment and cut the rubber press ring approx. 10 mm to the left or right of the screw hole with a sharp knife.
Skip product gallery

Customers also bought

Glue for swelling tapes
Glue for swelling tapes
Swelling tape glue for Betonite- and EPDM swelling tapes cartridge 310 ml; consumption: 1 cart./8 m  
Swelling tape made of bentonite
Swelling tape made of bentonite
Bentonite swelling tape are proven reliable since many years. The tape swells by contact with water and seal cracks and construction joints safe and durable. The tests guarantee that the product can be used in many differnet applications. General test certificate issued by an approved building inspectorate Approved for drinking water applications Advantages, which convince: Easy and safe installation No moulded parts and weldings No upstands Swell- and shrinkage proces is reversible Self-injecting effect Form stability and not sticky - the swelling tapes insists in cracks and cavities. No waste or remnants Environmentally friendly Safe through tests Installation:Swelling tape made of bentonite are mounted with grids or glues for swelling tapes. The tapes are laid within the reinforcment with 8 cm concrete cover.   Test certificates: Dimension 25/20, audited to a water pressure of 50 metre water column Suitable for Tidal zones Drinking water applications
This website uses cookies to ensure the best experience possible. More information...