Go to homepage
Catalogue
Wishlist
Request Basket
Skip image gallery

Properties

Medium pipe Ø: 125 - 127 mm
Verstellbereich in mm: 125 - 127 mm
ø in mm: 200 mm

Ringraumdichtung Basic 1 - Dichtungsbreite 40 mm

Product number: 61LXNC200ND125

Available, delivery time: 1-3 days

Medium pipe Ø
ø in mm

Price on request

Stk

Description

  • Annular seal Basic 1 made of stainless steel, V2A (material no.1.4301)
  • Seal width 40 mm for pressing water up to 2.5 bar
  • completley gastight and watertight
  • built-in torque control
  • EPDM rubber insert


DIVIDING THE RING SEAL BASIC 1

  • To split the annular seal Basic 1, loosen and remove a screw.
  • Unfold the front and rear press segment and cut the rubber press ring radially about 10 mm to the left or right of the screw hole with a sharp knife.

Properties

Medium pipe Ø: 125 - 127 mm
Verstellbereich in mm: 125 - 127 mm
ø in mm: 200 mm
Filter products
Variants

With the help of our variant list you can find your article faster and easier.

Product Nr.
Product
Medium pipe Ø
ø in mm
Price
Action
61LXNC125ND060
 Ringraumdichtung Basic 1 - Dichtungsbreite 40 mm
60 - 63 mm
125 mm
61LXNC150ND088
 Ringraumdichtung Basic 1 - Dichtungsbreite 40 mm
88 - 92 mm
150 mm
61LXNC150ND110
 Ringraumdichtung Basic 1 - Dichtungsbreite 40 mm
110 - 112 mm
150 mm
61LXNC200ND110
 Ringraumdichtung Basic 1 - Dichtungsbreite 40 mm
110 - 112 mm
200 mm
61LXNC200ND125
 Ringraumdichtung Basic 1 - Dichtungsbreite 40 mm
125 - 127 mm
200 mm
61LXNC200ND139
 Ringraumdichtung Basic 1 - Dichtungsbreite 40 mm
139 - 140 mm
200 mm
61LXNC200ND159
 Ringraumdichtung Basic 1 - Dichtungsbreite 40 mm
159 - 162 mm
200 mm
61LXNC250ND159
 Ringraumdichtung Basic 1 - Dichtungsbreite 40 mm
159 - 162 mm
250 mm
61LXNC250ND200
 Ringraumdichtung Basic 1 - Dichtungsbreite 40 mm
200 - 200 mm
250 mm
61LXNC250ND210
 Ringraumdichtung Basic 1 - Dichtungsbreite 40 mm
210 - 210 mm
250 mm
Skip product gallery

Customers also viewed

Ringraumdichtung Basic 1 - Dichtungsbreite 40 mm
Ringraumdichtung Basic 1 - Dichtungsbreite 40 mm
Annular seal Basic 1 made of stainless steel, V2A (material no.1.4301) Seal width 40 mm for pressing water up to 2.5 bar completley gastight and watertight built-in torque control EPDM rubber insert DIVIDING THE RING SEAL BASIC 1 To split the annular seal Basic 1, loosen and remove a screw. Unfold the front and rear press segment and cut the rubber press ring radially about 10 mm to the left or right of the screw hole with a sharp knife.
Ringraumdichtung Basic 1 - Dichtungsbreite 40 mm
Ringraumdichtung Basic 1 - Dichtungsbreite 40 mm
Annular seal Basic 1 made of stainless steel, V2A (material no.1.4301) Seal width 40 mm for pressing water up to 2.5 bar completley gastight and watertight built-in torque control EPDM rubber insert DIVIDING THE RING SEAL BASIC 1 To split the annular seal Basic 1, loosen and remove a screw. Unfold the front and rear press segment and cut the rubber press ring radially about 10 mm to the left or right of the screw hole with a sharp knife.
Ringraumdichtung Basic 1 - Dichtungsbreite 40 mm
Ringraumdichtung Basic 1 - Dichtungsbreite 40 mm
Annular seal Basic 1 made of stainless steel, V2A (material no.1.4301) Seal width 40 mm for pressing water up to 2.5 bar completley gastight and watertight built-in torque control EPDM rubber insert DIVIDING THE RING SEAL BASIC 1 To split the annular seal Basic 1, loosen and remove a screw. Unfold the front and rear press segment and cut the rubber press ring radially about 10 mm to the left or right of the screw hole with a sharp knife.
Ringraumdichtung Basic 1 - Dichtungsbreite 40 mm
Ringraumdichtung Basic 1 - Dichtungsbreite 40 mm
Annular seal Basic 1 made of stainless steel, V2A (material no.1.4301) Seal width 40 mm for pressing water up to 2.5 bar completley gastight and watertight built-in torque control EPDM rubber insert DIVIDING THE RING SEAL BASIC 1 To split the annular seal Basic 1, loosen and remove a screw. Unfold the front and rear press segment and cut the rubber press ring radially about 10 mm to the left or right of the screw hole with a sharp knife.
Kunststoff-Futterrohr WELLO mit Quellband
Kunststoff-Futterrohr WELLO mit Quellband
WELLO, the lining tube made of PE with an all-round swelling coating. The tube is smooth inside. The undulating outside clings to the concrete. Two swelling tapes applied around the center also prevent water from entering the structure Wello casing, double security through corrugation and swelling tape, sealing by means of an annular seal. Tested up to 30m water column.
Ringraumdichtung P-Cable Basic HRD 125
Ringraumdichtung P-Cable Basic HRD 125
The P-Cable Basic HRD annular seal is available in various designs.The following product identification is used: SG x (number of holes) / y-z (area in which the hole can be adjusted)
Annular Seal - cable Ø 100 mm foldable
Annular Seal - cable Ø 100 mm foldable
Annular seal - 4-fold cable Ø 100 mm MR Ø 6-40 mm Tested up to 10 m WS (1 bar) Hinged Annular seal for core drilling / wall sleeves Ø 100 mm Segment ring technology for 1 cable / tube Ø 25, 32 or 40 mm as well as 3 cables Ø 6-18 mm completly gastight and watertight Sealing width 40 mm, pressure-tight up to 1 bar profile and screws made of stainless steel V2A EPDM rubber insert integrated blind plug We expressly point out that if there are deviations from the information in the assembly instructions and if our products are used improperly, no guarantee is given for any consequential damage. MR = carrier pipe. Technical changes reserved.
Ringraumdichtung P-Cable Basic HRD Ø100
Ringraumdichtung P-Cable Basic HRD Ø100
The P-Cable Basic HRD annular seal is available in various designs.The following product identification is used: SG x (number of holes) / y-z (area in which the hole can be adjusted)
Ringraumdichtung; Compakt Universaldichtung Ø 150 mm
Ringraumdichtung; Compakt Universaldichtung Ø 150 mm
Core drilling Ø 150 mm Weight approx. 1.2 kg further dimensions on request
Seal "onion ring" technology Ø 150 mm - fixed type 1 MR Ø 32, 40, 50, 63, 76, 90, 110 mm
Seal "onion ring" technology Ø 150 mm - fixed type 1 MR Ø 32, 40, 50, 63, 76, 90, 110 mm
Seal for pressing and non-pressing water Tested for continuous use up to 30 m water column Press plates and screws made of V2A stainless steel Sealing width 40 mm NBR rubber insert Temperature range -30 ° C to + 120 ° C
This website uses cookies to ensure the best experience possible. More information...