Go to homepage
Catalogue
Wishlist
Request Basket
Skip image gallery

Properties

Medium pipe Ø: 200 - 200 mm
Verstellbereich in mm: 200 - 200 mm
ø in mm: 250 mm

Ringraumdichtung Basic 1 - Dichtungsbreite 40 mm

Product number: 61LXNC250ND200

Available, delivery time: 1-3 days

ø in mm
Medium pipe Ø

Price on request

Stk

Description

  • Annular seal Basic 1 made of stainless steel, V2A (material no.1.4301)
  • Seal width 40 mm for pressing water up to 2.5 bar
  • completley gastight and watertight
  • built-in torque control
  • EPDM rubber insert


DIVIDING THE RING SEAL BASIC 1

  • To split the annular seal Basic 1, loosen and remove a screw.
  • Unfold the front and rear press segment and cut the rubber press ring radially about 10 mm to the left or right of the screw hole with a sharp knife.

Properties

Medium pipe Ø: 200 - 200 mm
Verstellbereich in mm: 200 - 200 mm
ø in mm: 250 mm
Filter products
Variants

With the help of our variant list you can find your article faster and easier.

Product Nr.
Product
Medium pipe Ø
ø in mm
Price
Action
61LXNC125ND060
 Ringraumdichtung Basic 1 - Dichtungsbreite 40 mm
60 - 63 mm
125 mm
61LXNC150ND088
 Ringraumdichtung Basic 1 - Dichtungsbreite 40 mm
88 - 92 mm
150 mm
61LXNC200ND110
 Ringraumdichtung Basic 1 - Dichtungsbreite 40 mm
110 - 112 mm
200 mm
61LXNC200ND125
 Ringraumdichtung Basic 1 - Dichtungsbreite 40 mm
125 - 127 mm
200 mm
61LXNC200ND139
 Ringraumdichtung Basic 1 - Dichtungsbreite 40 mm
139 - 140 mm
200 mm
61LXNC200ND159
 Ringraumdichtung Basic 1 - Dichtungsbreite 40 mm
159 - 162 mm
200 mm
61LXNC250ND159
 Ringraumdichtung Basic 1 - Dichtungsbreite 40 mm
159 - 162 mm
250 mm
61LXNC250ND210
 Ringraumdichtung Basic 1 - Dichtungsbreite 40 mm
210 - 210 mm
250 mm
61LXNC300ND200
 Ringraumdichtung Basic 1 - Dichtungsbreite 40 mm
200 - 200 mm
300 mm
61LXNC300ND250
 Ringraumdichtung Basic 1 - Dichtungsbreite 40 mm
250 - 250 mm
300 mm
Skip product gallery

Customers also viewed

Ringraumdichtung Basic 1 - Dichtungsbreite 40 mm
Ringraumdichtung Basic 1 - Dichtungsbreite 40 mm
Annular seal Basic 1 made of stainless steel, V2A (material no.1.4301) Seal width 40 mm for pressing water up to 2.5 bar completley gastight and watertight built-in torque control EPDM rubber insert DIVIDING THE RING SEAL BASIC 1 To split the annular seal Basic 1, loosen and remove a screw. Unfold the front and rear press segment and cut the rubber press ring radially about 10 mm to the left or right of the screw hole with a sharp knife.
Ringraumdichtung Basic 1 - Dichtungsbreite 40 mm
Ringraumdichtung Basic 1 - Dichtungsbreite 40 mm
Annular seal Basic 1 made of stainless steel, V2A (material no.1.4301) Seal width 40 mm for pressing water up to 2.5 bar completley gastight and watertight built-in torque control EPDM rubber insert DIVIDING THE RING SEAL BASIC 1 To split the annular seal Basic 1, loosen and remove a screw. Unfold the front and rear press segment and cut the rubber press ring radially about 10 mm to the left or right of the screw hole with a sharp knife.
Ringraumdichtung Basic 1 - Dichtungsbreite 40 mm
Ringraumdichtung Basic 1 - Dichtungsbreite 40 mm
Annular seal Basic 1 made of stainless steel, V2A (material no.1.4301) Seal width 40 mm for pressing water up to 2.5 bar completley gastight and watertight built-in torque control EPDM rubber insert DIVIDING THE RING SEAL BASIC 1 To split the annular seal Basic 1, loosen and remove a screw. Unfold the front and rear press segment and cut the rubber press ring radially about 10 mm to the left or right of the screw hole with a sharp knife.
Ringraumdichtung Basic 1 - Dichtungsbreite 40 mm
Ringraumdichtung Basic 1 - Dichtungsbreite 40 mm
Annular seal Basic 1 made of stainless steel, V2A (material no.1.4301) Seal width 40 mm for pressing water up to 2.5 bar completley gastight and watertight built-in torque control EPDM rubber insert DIVIDING THE RING SEAL BASIC 1 To split the annular seal Basic 1, loosen and remove a screw. Unfold the front and rear press segment and cut the rubber press ring radially about 10 mm to the left or right of the screw hole with a sharp knife.
Ringraumdichtung Basic 1 - Dichtungsbreite 40 mm
Ringraumdichtung Basic 1 - Dichtungsbreite 40 mm
Annular seal Basic 1 made of stainless steel, V2A (material no.1.4301) Seal width 40 mm for pressing water up to 2.5 bar completley gastight and watertight built-in torque control EPDM rubber insert DIVIDING THE RING SEAL BASIC 1 To split the annular seal Basic 1, loosen and remove a screw. Unfold the front and rear press segment and cut the rubber press ring radially about 10 mm to the left or right of the screw hole with a sharp knife.
Ringraumdichtung Basic 1 - Dichtungsbreite 20 mm
Ringraumdichtung Basic 1 - Dichtungsbreite 20 mm
Annular seal Basic 1 made of stainless steel, V2A (material no.1.4301) Seal width 20 mm for non-pressing water up to 1.5 bar completely gastight and watertight built-in torque control EPDM rubber insert DIVIDING THE RING SEAL BASIC 1 To divide the press seal Basic 1, loosen and remove a screw. Unfold the front and rear press segment and cut the rubber press ring radially about 10 mm to the left or right of the screw hole with a sharp knife.
Ringraumdichtung Basic 1 - Dichtungsbreite 20 mm
Ringraumdichtung Basic 1 - Dichtungsbreite 20 mm
Annular seal Basic 1 made of stainless steel, V2A (material no.1.4301) Seal width 20 mm for non-pressing water up to 1.5 bar completely gastight and watertight built-in torque control EPDM rubber insert DIVIDING THE RING SEAL BASIC 1 To divide the press seal Basic 1, loosen and remove a screw. Unfold the front and rear press segment and cut the rubber press ring radially about 10 mm to the left or right of the screw hole with a sharp knife.
Ringraumdichtung; Compakt Universaldichtung Ø 150 mm
Ringraumdichtung; Compakt Universaldichtung Ø 150 mm
Core drilling Ø 150 mm Weight approx. 1.2 kg further dimensions on request
Ringraumdichtung Basic 1 - Dichtungsbreite 40 mm
Ringraumdichtung Basic 1 - Dichtungsbreite 40 mm
Annular seal Basic 1 made of stainless steel, V2A (material no.1.4301) Seal width 40 mm for pressing water up to 2.5 bar completley gastight and watertight built-in torque control EPDM rubber insert DIVIDING THE RING SEAL BASIC 1 To split the annular seal Basic 1, loosen and remove a screw. Unfold the front and rear press segment and cut the rubber press ring radially about 10 mm to the left or right of the screw hole with a sharp knife.
Ringraumdichtung Professional 2 geteilt
Ringraumdichtung Professional 2 geteilt
Eigenschaften: absolut gas- und wasserdicht geschlossen oder geteilt millimetergenau anpassbar leich motierbar optional mit überdeckendem Flansch (F) oder exzentrisch Mehrfachbelegung möglich Technische Daten: Dichtbreite 60 mm Edelstahl rostfrei V2A und V4A Gummiqualität in EPDM, NBR und mit KTW-Zulassung lieferbar für Kernbohrungen/Futterrohre von Ø 50 - 500 mm Rohrgröße bis Ø 400 mm     Kernbohrung / Futterrohr Ø mm Medium Rohr Ø mm 50 0 - 26 60 0 - 36 70 0 - 40 80 0 - 50 100 0 - 63 125 0 - 90 150 0 - 112 200 0 - 162 250 0 - 210 300 0 - 260 350 0 - 310 400 0 - 350 450 0 - 400 500 0 - 450                                              
Skip product gallery

Customers also bought

Mauerkragen aus TPE - Themoplastischem Elastomer
Mauerkragen aus TPE - Themoplastischem Elastomer
MPA certificated! Masonry collars from TPE-Themoplastic Elastomer Application area:The sealing collar is used whenever a water-tight lead-through of pipe lines through foundation slabs, walls, and masonry is required. The sealing collar, which has passed the pressure test at 5 bar, prevents moisture from getting into the building along the outer pipe walls. Tested for impermeability up to 50 m water column. Properties:The sealing collar is supplied in pre-assembled condition with 2 stainless steel straps. The circular, 4 cm wide collar, which is equipped with additional waterstops, prevents liquids from getting into the building. Small waterstops inside the collar ensure water-tightness up to a water column of 50 m after tightening of the stainless steel fastening straps.Assembly clean pipe surface if necessary slide on the sealing collar and fix it in the centre of the concrete/wall tighten the fastening straps
This website uses cookies to ensure the best experience possible. More information...