Properties

Medium pipe Ø:	75 - 110 mm
ø in mm:	150 mm

Seal "onion ring" technology Ø 150 mm - fixed type 2 width 40 mm MR Ø 75, 90, 110 mm

Product number: 61LXN120172

Available, delivery time: 1-3 days

Price on request

Stk

Description

Super segment ring technology for cables and pipes
3 segment rings with diameter lettering
for Ø 75, 90 and 110 mm
Subsequently divisible for pipes that have already been laid
for core drilling / wall sleeves Ø 150 mm
Seal width 40 mm, pressure-tight up to 1 bar
integrated torque control visible and tangible
U-profile and screws made of stainless steel V2A
EPDM rubber insert
integrated blind plug

Properties

Medium pipe Ø:	75 - 110 mm
ø in mm:	150 mm

Customers also viewed

Ringraumdichtung Basic 1 - Dichtungsbreite 20 mm

Annular seal Basic 1 made of stainless steel, V2A (material no.1.4301) Seal width 20 mm for non-pressing water up to 1.5 bar completely gastight and watertight built-in torque control EPDM rubber insert DIVIDING THE RING SEAL BASIC 1 To divide the press seal Basic 1, loosen and remove a screw. Unfold the front and rear press segment and cut the rubber press ring radially about 10 mm to the left or right of the screw hole with a sharp knife.

Ringraumdichtung; Compakt Universaldichtung Ø 150 mm

Core drilling Ø 150 mm Weight approx. 1.2 kg further dimensions on request

Seal "onion ring" technology Ø 100 mm - divisible MR Ø 25, 32, 40, 50 und 63 mm

Super segment ring technology for cables and pipes Open the pipe seal. Cut into the selected segment rings at the predetermined separation point with a sharp knife and tear off 5 segment rings with a diameter of 25 - 63 mm segment ring Pipe area Plug Ø 25 - 28 mm Nr. 1 Ø 32 mm Nr. 2 Ø 40 mm Nr. 3 Ø 50 mm Nr. 4 Ø 63 mm

Ringraumdichtung P-Cable Basic HRD Ø100

The P-Cable Basic HRD annular seal is available in various designs.The following product identification is used: SG x (number of holes) / y-z (area in which the hole can be adjusted)

Zwiebeldichtung Basic 1

Annular seal Basic 1 made of stainless steelStainless V2A Seal width 40 mm completely gastight and watertight built-in torque control EPDM rubber insert To split the press seal Basic 1, loosen and remove a screw. Unfold the front and rear press segment and cut the rubber press ring approx. 10 mm to the left or right of the screw hole with a sharp knife.

Seal "onion ring" technology Ø 200 mm - divisible MR Ø 110, 125, 135, 160 mm

Super segment ring technology for cables and pipes segment rings with diameter inscription for Ø 110, 125, 135 and 160 mm Subsequently divisible for pipes that have already been laid for core drilling / wall sleeves Ø 150 mm Seal width 40 mm, pressure-tight up to 1 bar integrated torque control visible and tangible U-profile and screws made of stainless steel V2A EPDM rubber insert integrated blind plugs

Ringraumdichtung Basic 1 - Dichtungsbreite 40 mm

Annular seal Basic 1 made of stainless steel, V2A (material no.1.4301) Seal width 40 mm for pressing water up to 2.5 bar completley gastight and watertight built-in torque control EPDM rubber insert DIVIDING THE RING SEAL BASIC 1 To split the annular seal Basic 1, loosen and remove a screw. Unfold the front and rear press segment and cut the rubber press ring radially about 10 mm to the left or right of the screw hole with a sharp knife.

Seal "onion ring" technology Ø 150 mm - fixed type 1 MR Ø 32, 40, 50, 63, 76, 90, 110 mm

Seal for pressing and non-pressing water Tested for continuous use up to 30 m water column Press plates and screws made of V2A stainless steel Sealing width 40 mm NBR rubber insert Temperature range -30 ° C to + 120 ° C

Ringraumdichtung Professional 2 geteilt

Eigenschaften: absolut gas- und wasserdicht geschlossen oder geteilt millimetergenau anpassbar leich motierbar optional mit überdeckendem Flansch (F) oder exzentrisch Mehrfachbelegung möglich Technische Daten: Dichtbreite 60 mm Edelstahl rostfrei V2A und V4A Gummiqualität in EPDM, NBR und mit KTW-Zulassung lieferbar für Kernbohrungen/Futterrohre von Ø 50 - 500 mm Rohrgröße bis Ø 400 mm Kernbohrung / Futterrohr Ø mm Medium Rohr Ø mm 50 0 - 26 60 0 - 36 70 0 - 40 80 0 - 50 100 0 - 63 125 0 - 90 150 0 - 112 200 0 - 162 250 0 - 210 300 0 - 260 350 0 - 310 400 0 - 350 450 0 - 400 500 0 - 450

Seal "onion ring" technology Ø 100 mm - divisible MR Ø 18 - 65 mm

Super segment ring technology for cables and pipes; 12 segment rings with a diameter of 16 - 65 mm; simply tear off the segments until they fit split design, suitable for subsequent installation Seal width 40 mm, pressure-tight up to 1 bar integrated torque control visible and tangible U-profile and screws made of stainless steel V2A EPDM rubber insert integrated blind plug