Go to homepage
Catalogue
Wishlist
Request Basket
Categories
Skip image gallery
Anschlusstrichter AT 110 mit Libelle und KG Rohr- ca. 590 mm
Anschlusstrichter AT 110 mit Libelle und KG Rohr- ca. 590 mm
Anschlusstrichter AT 110 mit Libelle und KG Rohr- ca. 590 mm

Properties

Ausführung: inkl. KG-Rohr

Anschlusstrichter AT 110 mit Libelle und KG Rohr- ca. 590 mm

Product number: 61LXMKAT10045

Available, delivery time: 1-3 days

Ausführung

Price on request

Stk

Description

Eigenschaften und technische Daten:

  • lieferbar in DN 100 (Außendurchmesser 110 mm)
  • Auslieferung inkl. Verschlussdeckel als Schutz gegen Beton und Schmutz, trittsicher und stolperfrei
  • Trichter ø innen = 250 mm, ø aussen = 370 mm
  • maximaler Versatz 90 mm • Anschlusstrichter aus ABS
  • WU-Beton Beanspruchungsklasse 1, Beanspruchungsklasse 2
  • DIN 18533 W1.1-E, Bodenfeuchte
  • Gas- und wasserdichte Verbindung mit der Bodenplatte dank integrierter Dreistegdichtung
  • KIWA-Geprüft
  • aus Radondichtem ABS - Kunststoff
  • mit integrierter Libelle zur lagemäßigen Ausrichtung des Anschlußtrichters
  • kann zur Bodenplattenentwässerung während der Bauphase verwendet werden; integrierte Schmutzfangrillen

Properties

Ausführung: inkl. KG-Rohr
Filter products
Variants

With the help of our variant list you can find your article faster and easier.

Product Nr.
Product
Ausführung
Price
Action
61LXMKAT10045
 Anschlusstrichter AT 110 mit Libelle und KG Rohr- ca. 590 mm
inkl. KG-Rohr
61LXMKAT100590
 Anschlusstrichter AT 110 ohne KG-Rohr
ohne KG-Rohr
Skip product gallery

Customers also viewed

Anschlusstrichter AT 110 ohne KG-Rohr

Anschlusstrichter mit und ohne vormontiertes KG-Rohr erhältlich. Eigenschaften und technische Daten: lieferbar in DN 100 (Außendurchmesser 110 mm) Auslieferung inkl. Verschlussdeckel als Schutz gegen Beton und Schmutz, trittsicher und stolperfrei Trichter ø innen = 250 mm, ø aussen = 370 mm maximaler Versatz 90 mm • Anschlusstrichter aus ABS WU-Beton Beanspruchungsklasse 1, Beanspruchungsklasse 2 DIN 18533 W1.1-E, Bodenfeuchte Gas- und wasserdichte Verbindung mit der Bodenplatte dank integrierter Dreistegdichtung KIWA-Geprüft aus Radondichtem ABS - Kunststoff mit integrierter Libelle zur lagemäßigen Ausrichtung des Anschlußtrichters kann zur Bodenplattenentwässerung während der Bauphase verwendet werden; integrierte Schmutzfangrillen

Mauerkragen aus TPE - Themoplastischem Elastomer

MPA certificated! Masonry collars from TPE-Themoplastic Elastomer Application area:The sealing collar is used whenever a water-tight lead-through of pipe lines through foundation slabs, walls, and masonry is required. The sealing collar, which has passed the pressure test at 5 bar, prevents moisture from getting into the building along the outer pipe walls. Tested for impermeability up to 50 m water column. Properties:The sealing collar is supplied in pre-assembled condition with 2 stainless steel straps. The circular, 4 cm wide collar, which is equipped with additional waterstops, prevents liquids from getting into the building. Small waterstops inside the collar ensure water-tightness up to a water column of 50 m after tightening of the stainless steel fastening straps.Assembly clean pipe surface if necessary slide on the sealing collar and fix it in the centre of the concrete/wall tighten the fastening straps

Seal "onion ring" technology Ø 150 mm - fixed type 2 width 40 mm MR Ø 75, 90, 110 mm

Super segment ring technology for cables and pipes 3 segment rings with diameter lettering for Ø 75, 90 and 110 mm Subsequently divisible for pipes that have already been laid for core drilling / wall sleeves Ø 150 mm Seal width 40 mm, pressure-tight up to 1 bar integrated torque control visible and tangible U-profile and screws made of stainless steel V2A EPDM rubber insert integrated blind plug

Protection cap VIBAProtect H

Comply with the requirements for covering vertical reinforcement bars in accordance with § 6 (4) BauV. The protective cap is made of special plastic and it is made in one piece. The cap has a steel insert for optimal safety. The hourglass-shaped body minimizes wear and tear and ensures optimal grip on the iron. The head is optimized for the Austrian market. Therefore, it can also be attached without any problem even when the iron gaps are smaller . Advantages: Narrow head for small iron gaps Reusable Weatherproof PVC - free

VIBADISTANZ-distance tube (VDZ) with swell covering incl. 2 plugs

formwork spacer sleeve "homogeneous" includig two plugs and a swell covering. Material: HDPE. VIBADISTANZ Active conforms all defaults. Any lengh on request!

VIBA-Flex Joint sheet 150 mm with mounting-base

Available in one side and both side coated design Without fixing clip.

ZZ-Leiste Iso 35 mm Länge 2 Meter

ZZ ISO rebar spacer is a skidproofed and tilt secured spacer for the bottom reinforcement. The material is PVC free. There will be no shrinking as the concrete encloses the batten completly. Suitable for XPS, isolation or other soft surfaces. Due to the special form a linear interruption can be avoided.

Swelling tape made of bentonite

Bentonite swelling tape are proven reliable since many years. The tape swells by contact with water and seal cracks and construction joints safe and durable. The tests guarantee that the product can be used in many differnet applications. General test certificate issued by an approved building inspectorate Approved for drinking water applications Advantages, which convince: Easy and safe installation No moulded parts and weldings No upstands Swell- and shrinkage proces is reversible Self-injecting effect Form stability and not sticky - the swelling tapes insists in cracks and cavities. No waste or remnants Environmentally friendly Safe through tests Installation:Swelling tape made of bentonite are mounted with grids or glues for swelling tapes. The tapes are laid within the reinforcment with 8 cm concrete cover.   Test certificates: Dimension 25/20, audited to a water pressure of 50 metre water column Suitable for Tidal zones Drinking water applications

Seal "onion ring" technology Ø 200 mm - divisible MR Ø 110, 125, 135, 160 mm

Super segment ring technology for cables and pipes segment rings with diameter inscription for Ø 110, 125, 135 and 160 mm Subsequently divisible for pipes that have already been laid for core drilling / wall sleeves Ø 150 mm Seal width 40 mm, pressure-tight up to 1 bar integrated torque control visible and tangible U-profile and screws made of stainless steel V2A EPDM rubber insert integrated blind plugs

VIBADISTANZ-distance tube (VDZ) with swell covering incl. 2 plugs

formwork spacer sleeve "homogeneous" includig two plugs and a swell covering. Material: HDPE. VIBADISTANZ Active conforms all defaults. Any lengh on request!

This website uses cookies to ensure the best experience possible. More information...