Go to homepage
Catalogue
Wishlist
Request Basket
Categories
Skip image gallery
ZZ-Leiste Iso 35 mm Länge 2 Meter

Properties

Betondeckung in mm: 35 mm
Lfm / Verpackung: Bund á 50 lfm
Material: PE (Polyethylen)

ZZ-Leiste Iso 35 mm Länge 2 Meter

Product number: 63IZP35

Available, delivery time: 1-3 days

Betondeckung in mm

Price on request

m
m

Description

ZZ ISO rebar spacer is a skidproofed and tilt secured spacer for the bottom reinforcement. The material is PVC free.
There will be no shrinking as the concrete encloses the batten completly. Suitable for XPS, isolation or other soft surfaces. Due to the special form a linear interruption can be avoided.

Properties

Betondeckung in mm: 35 mm
Lfm / Verpackung: Bund á 50 lfm
Material: PE (Polyethylen)
Downloads "ZZ-Leiste Iso 35 mm Länge 2 Meter"
Filter products
Variants

With the help of our variant list you can find your article faster and easier.

Product Nr.
Product
Betondeckung in mm
Price
Action
63IZP25
 ZZ-Leiste Iso 25 mm Länge 2 Meter
25 mm
63IZP35
 ZZ-Leiste Iso 35 mm Länge 2 Meter
35 mm
63IZP40
 ZZ-Leiste Iso 40 mm Länge 2 Meter
40 mm
63IZP50
 ZZ-Leiste Iso 50 mm Länge 2 Meter
50 mm
63IZP30
 ZZ-Leiste Iso 30 mm Länge 2 Meter
30 mm
Skip product gallery

Ähnliche Artikel

Rebar spacer made of PE

U-shaped bar spacer made of PE plastic used for the efficient rearrangement of the reinforcement. Mill length 200 cm. Other lengths available.

Details
Rebar spacer ZZ

Skidproofed and tilt secured spacer for the bottom reinforcement. There will be no shrinking as the concrete encloses the batten completly. Due to the special form a linear interruption can be avoided. Mill lenghts 200 cm. Other lenghts available.

Details
Skip product gallery

Customers also viewed

KG - Rohrdurchführung Typ UDM Fließrichtung

By draining waste water in a uniform flow direction without unnecessary edges, clogged pipes and nasty surprises are avoided. This can be done easily with the VIBA KG pipe bushing type UDM. Thanks to the innovative connection, external KG pipes can be connected to the spigot with the socket without the flow direction of the waste water being influenced by additional edges. Clogged pipes: no chance! Filling flange (flange made of ABS). When using plastic-modified bitumen coatings (load case according to DIN 18195 Part 4), the outer seal can be applied using the filler flange.

Binding wire / tension wire - roll

Type annealed

RiveStop Ø 24 mm x 50 mm SS intern-Einschub

TYPE: Internal RiveStop SS with stainless steel cover plate and stainless steel rivet mandrel. Ideal for exposed concrete walls in combination with the stainless steel cover. Water pressure tight up to 5 bar. Certified by APPLUS. It is recommended to use RiveStop with stainless steel rivets (SS) for sealing with direct water contact and constant pressing water. STEP 1: Insert RiveStop into the opening to be sealed. STEP 2: Remove the mandrel. The rivet will expand until the opening is hermetically sealed.

Mauerkragen aus TPE - Themoplastischem Elastomer

MPA certificated! Masonry collars from TPE-Themoplastic Elastomer Application area:The sealing collar is used whenever a water-tight lead-through of pipe lines through foundation slabs, walls, and masonry is required. The sealing collar, which has passed the pressure test at 5 bar, prevents moisture from getting into the building along the outer pipe walls. Tested for impermeability up to 50 m water column. Properties:The sealing collar is supplied in pre-assembled condition with 2 stainless steel straps. The circular, 4 cm wide collar, which is equipped with additional waterstops, prevents liquids from getting into the building. Small waterstops inside the collar ensure water-tightness up to a water column of 50 m after tightening of the stainless steel fastening straps.Assembly clean pipe surface if necessary slide on the sealing collar and fix it in the centre of the concrete/wall tighten the fastening straps

VIBADISTANZ-distance tube (VDZ) with swell covering incl. 2 plugs

formwork spacer sleeve "homogeneous" includig two plugs and a swell covering. Material: HDPE. VIBADISTANZ Active conforms all defaults. Any lengh on request!

Rolling feet for gate-elements

Rolling feet for gate element. To swing open the elements Design galvanized

Anschlusstrichter AT 110 mit Libelle und KG Rohr- ca. 590 mm

Eigenschaften und technische Daten: lieferbar in DN 100 (Außendurchmesser 110 mm) Auslieferung inkl. Verschlussdeckel als Schutz gegen Beton und Schmutz, trittsicher und stolperfrei Trichter ø innen = 250 mm, ø aussen = 370 mm maximaler Versatz 90 mm • Anschlusstrichter aus ABS WU-Beton Beanspruchungsklasse 1, Beanspruchungsklasse 2 DIN 18533 W1.1-E, Bodenfeuchte Gas- und wasserdichte Verbindung mit der Bodenplatte dank integrierter Dreistegdichtung KIWA-Geprüft aus Radondichtem ABS - Kunststoff mit integrierter Libelle zur lagemäßigen Ausrichtung des Anschlußtrichters kann zur Bodenplattenentwässerung während der Bauphase verwendet werden; integrierte Schmutzfangrillen

VIBADISTANZ-distance tube (VDZ) with swell covering incl. 2 plugs

formwork spacer sleeve "homogeneous" includig two plugs and a swell covering. Material: HDPE. VIBADISTANZ Active conforms all defaults. Any lengh on request!

Zwiebeldichtung Basic 1

Annular seal Basic 1 made of stainless steelStainless V2A Seal width 40 mm completely gastight and watertight built-in torque control EPDM rubber insert To split the press seal Basic 1, loosen and remove a screw. Unfold the front and rear press segment and cut the rubber press ring approx. 10 mm to the left or right of the screw hole with a sharp knife.

This website uses cookies to ensure the best experience possible. More information...