Products from Unbekannter Hersteller

For fixing the formwork in the lower area. PVC block: This stop is attached off-center with a steel nail and adjusted by turning, then fixed in the center.

For fixing the formwork in the lower area. PVC block: This stop is attached off-center with a steel nail and adjusted by turning, then fixed in the center.

For fixing the formwork in the lower area. PVC formwork stop with nail : With pre-assembled steel nail for quick assembly. Suitable for standard nail guns.

Anchor sleeve UNI Ø 15 mm three-part made of PA66GF30 With internal winch for Ø 15 mm Dywidag tie rod. Ideal use for fastening slab edge formwork, consoles, scaffolding, guardrails, etc. Permissible load 28KN

Der Montagedübel bietet eine kostengünstige Alternative zur Montage von Schrägstützen. Besonders geeignet für Doppel-Hohlwände, wegen der niedrigen Bauweise. Der Klebeteller ist durch eine Sollbruchstelle einfach zu entfernen.

To fixtate outgoing masonry walls on concrete. The brick tie anchors can be used at any desired position across the total length of the brick tie channel.

to connect and safe the wood-concrete slab edge shuttering, also VIBA - shuttering board HB , on the reinforcement. Material: galvanized Length: 80 mm Packaging: 100 pieces per bag

Fixation clamp for stop end formwork XPS Material: Plastic, injection molding

with anchor sleeve sealing + marker plugs The Rödel-Fix installation kit is a threaded plate made of plastic that is simply tied to the reinforcement with wire. Installation is easy and very quick. The threaded sleeve with marking plug...

For non-positive attachment to existing concrete or rock walls. The depth of the borehole depends on the type of rock or concrete. Security advice: Check tie points for load-bearing capacity before loading (there are different concrete...

Zur temporären Aufnahme großer zentrischer Zugkräfte. Die Bohrlochtiefe hängt von der max. Belastung des Ankers und damit von der Setztiefe ab. Zuverlässige Problemlösung und einfache Handhabung Geprüft von der Universität Dortmund –...

Anker zur kraftschlüssigen Befestigung an vorhandenen Beton- oder Felwänden. Die Bohrlochtiefe hängt von der Gesteins- und Betonart ab. Sicherheitshinweis: Ankerstelle vo der Belastung auf Tragfähigkeit prüfen.