Go to homepage
Catalogue
Wishlist
Request Basket
Skip image gallery

Properties

Innen ø in mm: 22 mm
Stück / Sack: true
Wall strength in cm: 35 cm

VIBADISTANZ-distance tube (VDZ) with swell covering incl. 2 plugs

Product number: 65ACF35VA
Wall strength in cm
Innen ø in mm
Stück
Stk

Description

formwork spacer sleeve "homogeneous" includig two plugs and a swell covering.
Material: HDPE. VIBADISTANZ Active conforms all defaults.

Any lengh on request!

Properties

Innen ø in mm: 22 mm
Stück / Sack: true
Wall strength in cm: 35 cm
Filter products
Variants

With the help of our variant list you can find your article faster and easier.

Product Nr.
Product
Innen ø in mm
Wall strength in cm
Price
Action
65ACF20VA
 VIBADISTANZ-distance tube (VDZ) with swell covering incl. 2 plugs
22 mm
20 cm
65ACF25VA
 VIBADISTANZ-distance tube (VDZ) with swell covering incl. 2 plugs
22 mm
25 cm
65ACF30VA
 VIBADISTANZ-distance tube (VDZ) with swell covering incl. 2 plugs
22 mm
30 cm
65ACF35VA
 VIBADISTANZ-distance tube (VDZ) with swell covering incl. 2 plugs
22 mm
35 cm
65ACF40VA
 VIBADISTANZ-distance tube (VDZ) with swell covering incl. 2 plugs
22 mm
40 cm
65ACF50VA
 VIBADISTANZ-distance tube (VDZ) with swell covering incl. 2 plugs
22 mm
50 cm
Skip product gallery

Customers also viewed

VIBADISTANZ spacer tube (VDZ) incl. 2 plugs
VIBADISTANZ spacer tube (VDZ) incl. 2 plugs
Formwork spacer tube "made of one piece" with two sealing plugs. Secure the wall thickness reliably! Material: HDPE
VIBADISTANZ-distance tube (VDZ) with swell covering incl. 2 plugs
VIBADISTANZ-distance tube (VDZ) with swell covering incl. 2 plugs
formwork spacer sleeve "homogeneous" includig two plugs and a swell covering. Material: HDPE. VIBADISTANZ Active conforms all defaults. Any lengh on request!
VIBA - Rebar connection (Double row) type M
VIBA - Rebar connection (Double row) type M
Metal box with rough surface.The surface polishing ensures a good connection with concrete and supports the transfer of shear forces. Rebendable structural steel BST550 with Austrian certificate. (BST 500 on request) Technical data: Standard - Elementlength 125 cm.Box heigth h1 = 3 cm; Other types on request. By Special types just fill the attached datasheet and send it to us per mail or fax.  
Contact adhesive CEM 805 for swelling waterstop and joint sealing strip
Contact adhesive CEM 805 for swelling waterstop and joint sealing strip
CEM805 is a one-component, neutral-odor sealing and bonding compound based on MS hybrid polymer technology. It is solvent-free, silicone-free and isocyanate-free, cures neutrally, is paint-compatible, weather-resistant and offers good chemical resistance. Applications:Contact adhesive CEM805 is used as a system sealant and installation adhesive for hydrophilic waterstops, joint sealing sheets and concrete plugs. Typical applications include: Sealing and bonding in concrete construction for interior and exterior use Tested for watertightness up to 5.0 bar hydrostatic water pressure (= 50 m water column) in the DualProof System (PVC-P), at product transitions and on concrete surfaces Crack-bridging up to 2.50 mm down to -35°C (crack-bridging class A5) Crack-bridging sealant up to 50 m water column Suitable for use on plaster, gypsum, ceramic, glass, wood, metal and various plastic substrates, as well as galvanized steel and aluminum Well suited for bonding construction foils and membranes Suitable for sealing and bonding applications requiring silicone-free systems on site Butt joint bonding of SilverSeal using CEM805 has been tested and proven watertight up to 2.5 bar (= 25 m water column) Hydrophilic joint tapes (Art. No. 61L) and swelling rubber profiles can be installed in a backflow-proof manner with CEM805 in accordance with German general building authority approval (abP) Also suitable for use with fresh concrete bonded waterproofing systems and joint sealing metal sheets. Note: Do not apply on substrates such as bitumen, tar or coatings that may cause incompatibilities and plasticizer migration. Standards and certification CEM805 contact adhesive is tested as a sealant in accordance with EN 15651-1 and certified as EC1Plus according to EMICODE. Product features and advantages:  Ready-to-use MS polymer installation adhesive and sealant, free of silicone, isocyanates and solvents, with a broad adhesion spectrum Elastic Non-corrosive Neutral odor Weathering and aging resistant Good UV resistance Virtually no shrinkage No bubble formation Paint-compatible
Swelling tape made of TPE (Flowstop)
Swelling tape made of TPE (Flowstop)
TPE (thermoplastic elastomer) - swelling tape for the safe sealing of construction joints and penetrations, in concrete structures, against the ingress of water. Because of the swelling and the swelling pressure generated during the swelling process no water can penetrate Application: The sealing of construction and connection joints in / on concrete structures in the foundation and groundwater area are typical applications for the FLOWSTOP high pressure swelling tape. As well as all types of penetrations of the building structure in areas that are to be permanently sealed against water. The FLOWSTOP high-pressure swelling tapes are easy, quick and inexpensive to install and are reliable and permanently sealed, even with high water pressure! In comparison to other sealing products no additional upstand is necessary.
Formwork stop GFK conrete grey
Formwork stop GFK conrete grey
Formwork stop made of fibreglass. Pins Ø: 10 mm; Length: 100 mm ADVANTAGES: Non-corrosive High strength and stable Chemical resistance Fast and easy installation INSTALLATION: Mark the position of the formwork with a snap line. Drill periodically holes with a diameter of 10mm along the marking. ATTENTION: Please consider the length of the pins. 
VIBADISTANZ spacer tube (VDZ) incl. 2 plugs
VIBADISTANZ spacer tube (VDZ) incl. 2 plugs
Formwork spacer tube "made of one piece" with two sealing plugs. Secure the wall thickness reliably! Material: HDPE
Swelling tape made of TPE (Flowstop)
Swelling tape made of TPE (Flowstop)
TPE (thermoplastic elastomer) - swelling tape for the safe sealing of construction joints and penetrations, in concrete structures, against the ingress of water. Because of the swelling and the swelling pressure generated during the swelling process no water can penetrate Application: The sealing of construction and connection joints in / on concrete structures in the foundation and groundwater area are typical applications for the FLOWSTOP high pressure swelling tape. As well as all types of penetrations of the building structure in areas that are to be permanently sealed against water. The FLOWSTOP high-pressure swelling tapes are easy, quick and inexpensive to install and are reliable and permanently sealed, even with high water pressure! In comparison to other sealing products no additional upstand is necessary.
VIBADISTANZ spacer tube (VDZ) incl. 2 plugs
VIBADISTANZ spacer tube (VDZ) incl. 2 plugs
Formwork spacer tube "made of one piece" with two sealing plugs. Secure the wall thickness reliably! Material: HDPE
Abstandrohre mit aufgerauter Oberfläche von Ø 20mm bis Ø 40mm in Bunden. Standardlänge ist 2,0 Meter.
Spacer tubes with a roughened surface
Spacer tubes with a roughened surface from Ø 20mm to Ø 40 mm in bundlesØ 20mm to Ø 22mm 100 running meters per bundleØ 26mm to Ø 32mm 50 running meters per bundleØ 40mm 30 running meters per bundle
This website uses cookies to ensure the best experience possible. More information...