Ribbed drawn metal Superrip

Stärke in mm:	0,40 mm

Stärke in mm:	0,40 mm

Product Nr.	Product	Stärke in mm	Price	Action
69R04	Ribbed drawn metal Superrip	0,58 mm	Log in to see more information	Log in or Sign up
69R06	Ribbed drawn metal Superrip	0,40 mm	Log in to see more information	Log in or Sign up

Ripped drawb netak Lochripp

Element size 250 x 60 cm Used as permanent formwork in concrete and reinforced concrete construction. Longitudinal ribs ensure high load-bearing capacity. Strong bonding effect through stong surface profiling. Great stability thanks to 10 mm high ribs and bead reinforcement. Very cost-effective because there is no need to remove or clean the formwork

Ribbed drawn metal Superrip

Used as shuttering formwork in concrete and reinforced concrete construction. Longitudinal ribs ensure high load-bearing capacity. Strong composite effect becauce of the strong surface profiling. Particularly high stability thanks to 21 mm high ribs and bead reinforcement as well as a higher material thickness of 0.4 or 0.6 mm. Very cost-effective, as there is no need to remove or clean the formwork Element size 200 x 44.5 cm

Ripped drawb netak Lochripp

Element size 250 x 60 cm Used as permanent formwork in concrete and reinforced concrete construction. Longitudinal ribs ensure high load-bearing capacity. Strong bonding effect through stong surface profiling. Great stability thanks to 10 mm high ribs and bead reinforcement. Very cost-effective because there is no need to remove or clean the formwork

Formwork stripes

The formwork stripes is used to create recesses in base plates and ceiling. The formwork stripes (length: 10m) are perforated in transverse direction each 5 cm. It is possible to creates recesses in different dimensions. As example: 25 / 25 , 20 / 20 or 15 / 15. The profiling allows optimum connection in concrete. Available in all heights from 14 to 36 cm. Installation instruction: 1. Cut the needed length with a cutter from the roll. 2. Fold the formwork stripes in the required size. 3. Connect the overlapped endings with binding wire. 4. Nail the recess quiver sideward through the punch opening.

Vitzthum-Baurohr Standard-Spiral

Concrete form round in spiral version. Other lengths on request!

VIBA - Kombianker Ø 15 mm SW 13 Bohrloch 14 mm

Vielfältige Anwendungsbereiche für alle zeitlich begrenzten Befestigungen mit niedriger bis mittlerer Belastung, z.B. Maschinenbefestigungen wie Kernbohrgeräte, Betonbearbeitungsmaschinen etc. Enorme Zeitersparnis – bis zu 30%. Keine Reinigung des Bohrloches erforderlich; zusätzliche Arbeitsvorgänge entfallen Kein Dübel, keine Spreizwirkung. Minimaler Einsatz von Werkzeugen, Akkuschrauber empfohlen!<?xml:namespace prefix="o" ns="urn:schemas-microsoft-com:office:office" /> Einfachste Kontrolle über Bohrloch Ø,-Tiefe und vollständig eingedrehtes Gewinde. Wiederverwendbar! Je nach Untergrundbeschaffenheit sind bis zu 20 Setzvorgänge möglich.

Rubber squeugee Alu type B

Rubber squeegee, very solid, suitable for heavy use, for pulling and pushing work. For distributing formwork oil, for sealing and sealing in road surfaces, for pushing in pavement and slabs with sand, for cleaning the streets and garages of dirt and slush.

High-power injector 10 lt. oil-resistant

for fast coating of surfaces (formwork boards, etc.) metal housing

Installationsbloc "Prottelith"

Product properties: non-flammable passable insensitive to moisture frost-resistent easy perforation of openings Bulk density: 300 kg m³, +- 5% Compressive strength: 240 kPa (10% compression) Baustoffklasse: A2, s1, dO(ÖNORM EN 13501-1)

VIBA - Kombianker Ø 15 mm SW 13 Bohrloch 14 mm

Vielfältige Anwendungsbereiche für alle zeitlich begrenzten Befestigungen mit niedriger bis mittlerer Belastung, z.B. Maschinenbefestigungen wie Kernbohrgeräte, Betonbearbeitungsmaschinen etc. Enorme Zeitersparnis – bis zu 30%. Keine Reinigung des Bohrloches erforderlich; zusätzliche Arbeitsvorgänge entfallen Kein Dübel, keine Spreizwirkung. Minimaler Einsatz von Werkzeugen, Akkuschrauber empfohlen!<?xml:namespace prefix="o" ns="urn:schemas-microsoft-com:office:office" /> Einfachste Kontrolle über Bohrloch Ø,-Tiefe und vollständig eingedrehtes Gewinde. Wiederverwendbar! Je nach Untergrundbeschaffenheit sind bis zu 20 Setzvorgänge möglich.

Properties

Description

Properties