Skip to main content Skip to search Skip to main navigation
Filter products
Variants

With the help of our variant list you can find your article faster and easier.

Product Nr.
Product
Stärke in mm
Price
Action
69R04
Ribbed drawn metal Superrip
0,58 mm
69R06
Ribbed drawn metal Superrip
0,40 mm
Skip product gallery

Customers also viewed

Ribbed drawn metal Superrip
Used as shuttering formwork in concrete and reinforced concrete construction. Longitudinal ribs ensure high load-bearing capacity. Strong composite effect becauce of the strong surface profiling. Particularly high stability thanks to 21 mm high ribs and bead reinforcement as well as a higher material thickness of 0.4 or 0.6 mm. Very cost-effective, as there is no need to remove or clean the formwork Element size 200 x 44.5 cm
Ripped drawb netak Lochripp
Element size 250 x 60 cm Used as permanent formwork in concrete and reinforced concrete construction. Longitudinal ribs ensure high load-bearing capacity. Strong bonding effect through stong surface profiling. Great stability thanks to 10 mm high ribs and bead reinforcement. Very cost-effective because there is no need to remove or clean the formwork  
Formwork stripes
The formwork stripes is used to create recesses in base plates and ceiling. The formwork stripes (length: 10m) are perforated in transverse direction each 5 cm. It is possible to creates recesses in different dimensions. As example: 25 / 25 , 20 / 20 or 15 / 15. The profiling allows optimum connection in concrete. Available in all heights from 14 to 36 cm. Installation instruction: 1. Cut the needed length with a cutter from the roll. 2. Fold the formwork stripes in the required size. 3. Connect the overlapped endings with binding wire. 4. Nail the recess quiver sideward through the punch opening.
Ripped drawb netak Lochripp
Element size 250 x 60 cm Used as permanent formwork in concrete and reinforced concrete construction. Longitudinal ribs ensure high load-bearing capacity. Strong bonding effect through stong surface profiling. Great stability thanks to 10 mm high ribs and bead reinforcement. Very cost-effective because there is no need to remove or clean the formwork  
Upturn beam element - with water bar holder bottom plate / wall
Upturn beam element made of wave-profiled perforated metal plate in order to set on edge in the area of the bottom plate. Including a integrated water bar or joint plate holder.Element length: 2500 mm (standard)
Concrete formwork mounting kit
Concrete formwork mounting set including: 1 x Tensile belts length 4,0 m 2 x Threaded subplate Ø 15 mm, 2 x Wing nuts Ø 15 mm
Impact sound - bearing 10 x 100 mm
The impact sound bearing is a PUR-bound rubber granulate forSupporting stairs and ceilings. Technical specifications: Volume weight                                                  820 kg / m³Basis weight                                                      820 g / m² / mmTear strength according to DIN 53571              1.2 N / mm²Elongation at break according to DIN 53571    90%Temperature resistance                                     -40 ° C - 90 ° CFire behavior according to DIN 4102 class       B2Recommended load                                          0.1 - 0.4 N / mm²Feather area                                                     approx. 0.7 - 1.5 mm
Bewehrungsspirale für Baurohre
Wire length = 7,5 m Usage length = 1,0 m
Installationsbloc "Prottelith"
Product properties: non-flammable passable  insensitive to moisture frost-resistent easy perforation of openings Bulk density: 300 kg m³, +- 5% Compressive strength: 240 kPa (10% compression) Baustoffklasse: A2, s1, dO(ÖNORM EN 13501-1)
Rubber squeugee Alu type B
Rubber squeegee, very solid, suitable for heavy use, for pulling and pushing work. For distributing formwork oil, for sealing and sealing in road surfaces, for pushing in pavement and slabs with sand, for cleaning the streets and garages of dirt and slush.