Go to homepage
Catalogue
Wishlist
Request Basket
Skip image gallery

Properties

Wandstärke in mm: 250 mm
ø in mm: 100 mm

KG 2000 - Rohrdurchführungen Typ FR Fließrichtung

Product number: 61LXRCFR100250

Available, delivery time: 1-3 days

ø in mm
Wandstärke in mm

Price on request

Stk

Description

The pipe bushing type FR fulfills the wishes of many building owners and architects to drain sewage from the building in only one direction of flow. The special connection avoids unnecessary edges. Thanks to the watertight, all-round four-web seal and an additional all-round double-wall seal, it stays dry even in the basement. The built-in covers are included in the delivery for easy and safe installation.

Other diameters and wall thicknesses on request!

Properties

Wandstärke in mm: 250 mm
ø in mm: 100 mm
Filter products
Variants

With the help of our variant list you can find your article faster and easier.

Product Nr.
Product
Wandstärke in mm
ø in mm
Price
Action
61LXRCFR100200
 KG 2000 - Rohrdurchführungen Typ FR Fließrichtung
200 mm
100 mm
61LXRCFR100250
 KG 2000 - Rohrdurchführungen Typ FR Fließrichtung
250 mm
100 mm
61LXRCFR100300
 KG 2000 - Rohrdurchführungen Typ FR Fließrichtung
300 mm
100 mm
61LXRCFR125200
 KG 2000 - Rohrdurchführungen Typ FR Fließrichtung
200 mm
125 mm
61LXRCFR125250
 KG 2000 - Rohrdurchführungen Typ FR Fließrichtung
250 mm
125 mm
61LXRCFR125300
 KG 2000 - Rohrdurchführungen Typ FR Fließrichtung
300 mm
125 mm
61LXRCFR150200
 KG 2000 - Rohrdurchführungen Typ FR Fließrichtung
200 mm
150 mm
61LXRCFR150250
 KG 2000 - Rohrdurchführungen Typ FR Fließrichtung
250 mm
150 mm
61LXRCFR150300
 KG 2000 - Rohrdurchführungen Typ FR Fließrichtung
300 mm
150 mm
Skip product gallery

Customers also viewed

Ringraumdichtung Basic 1 - Dichtungsbreite 40 mm
Ringraumdichtung Basic 1 - Dichtungsbreite 40 mm
Annular seal Basic 1 made of stainless steel, V2A (material no.1.4301) Seal width 40 mm for pressing water up to 2.5 bar completley gastight and watertight built-in torque control EPDM rubber insert DIVIDING THE RING SEAL BASIC 1 To split the annular seal Basic 1, loosen and remove a screw. Unfold the front and rear press segment and cut the rubber press ring radially about 10 mm to the left or right of the screw hole with a sharp knife.
Ringraumdichtung P-Cable Basic HRD Ø150
Ringraumdichtung P-Cable Basic HRD Ø150
The P-Cable Basic HRD annular seal is available in various designs.The following product identification is used: SG x (number of holes) / y-z (area in which the hole can be adjusted)
KG 2000 - Rohrdurchführungen Typ FR Fließrichtung
KG 2000 - Rohrdurchführungen Typ FR Fließrichtung
The pipe bushing type FR fulfills the wishes of many building owners and architects to drain sewage from the building in only one direction of flow. The special connection avoids unnecessary edges. Thanks to the watertight, all-round four-web seal and an additional all-round double-wall seal, it stays dry even in the basement. The built-in covers are included in the delivery for easy and safe installation. Other diameters and wall thicknesses on request!
KG - Rohrdurchführung Typ UDM Fließrichtung
KG - Rohrdurchführung Typ UDM Fließrichtung
By draining waste water in a uniform flow direction without unnecessary edges, clogged pipes and nasty surprises are avoided. This can be done easily with the VIBA KG pipe bushing type UDM. Thanks to the innovative connection, external KG pipes can be connected to the spigot with the socket without the flow direction of the waste water being influenced by additional edges. Clogged pipes: no chance! Filling flange (flange made of ABS). When using plastic-modified bitumen coatings (load case according to DIN 18195 Part 4), the outer seal can be applied using the filler flange.
KG 2000 - Rohrdurchführungen Typ FR Fließrichtung
KG 2000 - Rohrdurchführungen Typ FR Fließrichtung
The pipe bushing type FR fulfills the wishes of many building owners and architects to drain sewage from the building in only one direction of flow. The special connection avoids unnecessary edges. Thanks to the watertight, all-round four-web seal and an additional all-round double-wall seal, it stays dry even in the basement. The built-in covers are included in the delivery for easy and safe installation. Other diameters and wall thicknesses on request!
KG 2000 - Rohrdurchführungen Typ FR Fließrichtung
KG 2000 - Rohrdurchführungen Typ FR Fließrichtung
The pipe bushing type FR fulfills the wishes of many building owners and architects to drain sewage from the building in only one direction of flow. The special connection avoids unnecessary edges. Thanks to the watertight, all-round four-web seal and an additional all-round double-wall seal, it stays dry even in the basement. The built-in covers are included in the delivery for easy and safe installation. Other diameters and wall thicknesses on request!
KG - Rohrdurchführung Typ UDM Fließrichtung
KG - Rohrdurchführung Typ UDM Fließrichtung
By draining waste water in a uniform flow direction without unnecessary edges, clogged pipes and nasty surprises are avoided. This can be done easily with the VIBA KG pipe bushing type UDM. Thanks to the innovative connection, external KG pipes can be connected to the spigot with the socket without the flow direction of the waste water being influenced by additional edges. Clogged pipes: no chance! Filling flange (flange made of ABS). When using plastic-modified bitumen coatings (load case according to DIN 18195 Part 4), the outer seal can be applied using the filler flange.
Ringraumdichtung Basic 1 - Dichtungsbreite 40 mm
Ringraumdichtung Basic 1 - Dichtungsbreite 40 mm
Annular seal Basic 1 made of stainless steel, V2A (material no.1.4301) Seal width 40 mm for pressing water up to 2.5 bar completley gastight and watertight built-in torque control EPDM rubber insert DIVIDING THE RING SEAL BASIC 1 To split the annular seal Basic 1, loosen and remove a screw. Unfold the front and rear press segment and cut the rubber press ring radially about 10 mm to the left or right of the screw hole with a sharp knife.
Ringraumdichtung P-Cable Basic HRD Ø150
Ringraumdichtung P-Cable Basic HRD Ø150
The P-Cable Basic HRD annular seal is available in various designs.The following product identification is used: SG x (number of holes) / y-z (area in which the hole can be adjusted)
KG - Bodendurchlässe
KG - Bodendurchlässe
MPA tested! KG pipe length 0.5 mwith water stop and one-sided sleeve without cover
This website uses cookies to ensure the best experience possible. More information...