Properties
| Breite in m: | 2,0 m |
|---|---|
| Länge in m: | 20 m |
| Material: | HDPE |
Noppenfolie T20 Noppenhöhe 20 mm
Properties
| Breite in m: | 2,0 m |
|---|---|
| Länge in m: | 20 m |
| Material: | HDPE |
Ähnliche Artikel
Roll length 20 metre. Sturdy and durable protection against mechanical damage. Creates an air layer in front of the existing masonry with pimples (8 mm). The basemant walls can breath and moisture isn'T stuck within the construction. Material: HDPE, Fire behavior: B2 DIN 4102.
Customers also viewed
Sturdy and durable protection against mechanical damage. Creates an air layer in front of the existing masonry with pimples (10 mm). The basemant walls can breath and moisture isn'T stuck within the construction. Material: HDPE, Fire behavior: B2 DIN 4102.
U-shaped bar spacer made of plastic used for the efficient rearrangement of the reinforcement. Mill length 200 cm. Other lengths available.
Protection cap made of plastic for accident preventation. Attention! No penetration safety!
U-shaped bar spacer made of plastic used for the efficient rearrangement of the reinforcement. Mill length 200 cm. Other lengths available.
WELLO, the lining tube made of PE with an all-round swelling coating. The tube is smooth inside. The undulating outside clings to the concrete. Two swelling tapes applied around the center also prevent water from entering the structure Wello casing, double security through corrugation and swelling tape, sealing by means of an annular seal. Tested up to 30m water column.
The board is a universal usable and cost-effective shuttering for single and strip foundations. The structure of the board allows the absorption of a lot of pressure and by cutting in one side of the baord, it can be easily bent around corners. Board size: 5.04 m² Advantages: low dead weight of the plate assembly possible without crane and other aids prefabricated foundations with low installation time environmentally friendly, not hazardous to water, material recycling possible single or strip foundations can be made easily without additional tools no abherent required dimensionally stable
Cross clamps in different designs for grounding strap / wire combination
Liquid Formwork Release Agent Cire E-31 – for Architectural Concrete (WGK 3) Cire E-31 is a formwork release agent for the production of high-quality architectural concrete in precast concrete manufacturing. It is suitable for concrete made with white or grey cement, as well as coloured concrete, and is specifically designed to achieve premium exposed concrete finishes. The precast elements can subsequently be left untreated or subjected to further surface treatments such as sandblasting, polishing, grinding, or bush hammering. After drying, Cire E-31 forms a thin wax film on the formwork surface, enabling easy demoulding while producing a smooth, pore-free concrete surface with a uniform and attractive colour. Excellent results are also achieved on timber formwork and board formwork.
Sturdy and durable protection against mechanical damage. Creates an air layer in front of the existing masonry with pimples (10 mm). The basemant walls can breath and moisture isn'T stuck within the construction. Material: HDPE, Fire behavior: B2 DIN 4102.
Our VIBA Sinterflex waterstop sheet is coated on both sides with a patented “active” special coating. This coating is non-sticky and does not require any protective film to be removed before concreting. The coating bonds with the concrete through a natural reaction with the surrounding concrete, thereby actively sealing the joint to be waterproofed. The joint is actively sintered by the special coating and therefore becomes increasingly dense over time. This process is referred to as active sintering or active mineralizing deep sealing. The unique bond between the active VIBA Sinterflex special coating and fresh concrete reliably prevents water from migrating around the VIBA Sinterflex waterstop system. For secure sealing, a concrete embedment of only 3 cm is sufficient. VIBA Sinterflex is water-reactive and therefore actively seals construction joints and designed crack joints through a natural concrete-technology process. Water pressures up to and including 5 bar = 50 m water column can be safely sealed.