Cire E-31 – Liquid Formwork Release Wax for Exposed Concrete
Zubehör
for fast coating of surfaces (formwork boards, etc.) metal housing
for fast coating of surfaces (formwork boards, etc.) metal housing
Ähnliche Artikel
Biological architectural concrete release agent Ricon (Art. No.: 52W3) is an environmentally friendly release agent emulsion based on renewable raw materials. It has been specially developed for producing high-quality architectural concrete surfaces in precast and in-situ concrete construction. The special formulation ensures very light-colored and high-quality concrete surfaces. After application, the emulsion forms a milky white film, which disappears after the water component has flashed off. Once this evaporation process is complete, concreting can begin. Depending on weather conditions, the flashing-off time is approx. 10–30 minutes at 20°C and 60% relative humidity. Properties: Based on renewable raw materials Excellent release performance For visually high-quality and light-colored concrete surfaces Solvent-free and mineral oil-free Low odor Ready to use Easy to spra
Customers also viewed
• Homogeneous bond with concrete thanks to special coating • 2 end caps included in the scope of delivery • Gas-tight and watertight
WELLO, the lining tube made of PE with an all-round swelling coating. The tube is smooth inside. The undulating outside clings to the concrete. Two swelling tapes applied around the center also prevent water from entering the structure Wello casing, double security through corrugation and swelling tape, sealing by means of an annular seal. Tested up to 30m water column.
One-piece formwork spacer tube with two sealing plugs, ensuring the specified wall thickness reliably. Spacer tube / cone system tested for watertightness up to 5 bar Fire resistance tested in accordance with EN 1363-1 Complies with the requirements of the W1 guideline
• Homogeneous bond with concrete thanks to special coating • 2 end caps included in the scope of delivery • Gas-tight and watertight
• Homogeneous bond with concrete thanks to special coating • 2 end caps included in the scope of delivery • Gas-tight and watertight
WELLO, the lining tube made of PE with an all-round swelling coating. The tube is smooth inside. The undulating outside clings to the concrete. Two swelling tapes applied around the center also prevent water from entering the structure Wello casing, double security through corrugation and swelling tape, sealing by means of an annular seal. Tested up to 30m water column.
Comply with the requirements for covering vertical reinforcement bars in accordance with § 6 (4) BauV. The protective cap is made of special plastic and it is made in one piece. The cap has a steel insert for optimal safety. The hourglass-shaped body minimizes wear and tear and ensures optimal grip on the iron. The head is optimized for the Austrian market. Therefore, it can also be attached without any problem even when the iron gaps are smaller . Advantages: Narrow head for small iron gaps Reusable Weatherproof PVC - free
Shuttering element for joint seal sheet (VIBAFlex, VIBA Sinterflex, etc.), suitable for construction joints in walls in accordance with DIN EN 1992-1-1/NA. The sealing is made by the waterstop seal sheet. The formwork consists of a stable, fine-meshed expanded metal, which, in the keyed version, is profiled in accordance with DIN EN 1992-1-1/NA. The elements feature a slot for accommodating the waterstop sheet to be installed on site.
• Homogeneous bond with concrete thanks to special coating • 2 end caps included in the scope of delivery • Gas-tight and watertight
• Homogeneous bond with concrete thanks to special coating • 2 end caps included in the scope of delivery • Gas-tight and watertight