Formwork oil Prägnit ST300

Product number: 52WF

Available, delivery time: 1-3 days

barrel

Container

Faß

Kanne

Price on request

Description

Tested formwork oil suitable for all formworks.
Good degradable with certificate
Mixture of mineral oil and plant-based oil

Apply a thin layer for best effect with protection of the formwork. No cleaning of the formwork neccessary.

Degredable for 81% within 21 days.

Variants

With the help of our variant list you can find your article faster and easier.

Product Nr.	Product	barrel	Price
52WF	Formwork oil Prägnit ST300	Faß	Log in to see more information
52WK	Formwork oil Prägnit ST300	Container	Log in to see more information
52W	Formwork oil Prägnit ST300	Kanne	Log in to see more information

Product Nr. : 52WF

Formwork oil Prägnit ST300

Price

barrel: Faß

In Stock

Available, delivery time: 1-3 days

Product Nr. : 52WK

Formwork oil Prägnit ST300

Price

barrel: Container

In Stock

Available, delivery time: 1-3 days

Product Nr. : 52W

Formwork oil Prägnit ST300

Price

barrel: Kanne

In Stock

Available, delivery time: 1-3 days

Zubehör

High-power injector 5 lt. oil-resistant

for fast coating of surfaces (formwork boards, etc.) metal housing

High-power injector 10 lt. oil-resistant

for fast coating of surfaces (formwork boards, etc.) metal housing

Ähnliche Artikel

Release agent for exposed concrete – Ricon emulsion based on plant-based oils

Biological architectural concrete release agent Ricon (Art. No.: 52W3) is an environmentally friendly release agent emulsion based on renewable raw materials. It has been specially developed for producing high-quality architectural concrete surfaces in precast and in-situ concrete construction. The special formulation ensures very light-colored and high-quality concrete surfaces. After application, the emulsion forms a milky white film, which disappears after the water component has flashed off. Once this evaporation process is complete, concreting can begin. Depending on weather conditions, the flashing-off time is approx. 10–30 minutes at 20°C and 60% relative humidity. Properties: Based on renewable raw materials Excellent release performance For visually high-quality and light-colored concrete surfaces Solvent-free and mineral oil-free Low odor Ready to use Easy to spra

Schalöl / Trennmittel VIBA-Trenn - Multi Elio 28

VIBA-Trenn - Multi Elio 28 ist ein gebrauchsfertiges Betontrennmittel, dessen physikalischen Eigenschaften eine einfache Entschalung des Betons nach dem Aushärten ermöglichen.Das Schalöl bildet einen nicht klebrigen Film, der die Trennung des Betons von der Formund eine glatte, perfekte Betonoberäche ermöglicht.Multi Elio 28 ist besonders geeignet für Stahl und nichtsaugende Holzschalungen sowie für Betonelemente die vertikal betoniert werden. Verbrauch:Stahlschalungen : 50 m/l Holzschalungen : 30 m/l

Details

VIBA-Trenn RAPID – Concrete Release Agent

VIBA-Trenn RAPID contains special naphthenic base oils and carefully selected active agents to meet a wide range of application requirements. Particular emphasis has been placed on ease of use and proven performance under practical jobsite conditions. Coverage: 1 litre covers approximately 60–70 m², depending on the application method and the type of formwork. The release agent forms a high-pressure-resistant, stable release film that effectively prevents build-up, even in hard-to-reach areas. It ensures easy and fast stripping (demoulding) while protecting both the concrete surface and the formwork. RAPID Release Agent is formulated with anti-corrosion properties and is non-aggressive towards paint, plastics, and metals. The product does not resinify or gum up, ensuring consistent performance throughout its service life.

Details

Customers also viewed

Formwork oil Prägnit ST300

Tested formwork oil suitable for all formworks. Good degradable with certificate Mixture of mineral oil and plant-based oil Apply a thin layer for best effect with protection of the formwork. No cleaning of the formwork neccessary. Degredable for 81% within 21 days.

Formwork oil Prägnit ST300

Zement-Verbund-Rohr (PVC) mit Spezialbeschichtung

• Homogeneous bond with concrete thanks to special coating • 2 end caps included in the scope of delivery • Gas-tight and watertight

PAE-Construction foil

Other widths and strengths on request. Rated strength less usual tolerance.

Mauerkragen aus TPE - Themoplastischem Elastomer

MPA certificated! Masonry collars from TPE-Themoplastic Elastomer Application area:The sealing collar is used whenever a water-tight lead-through of pipe lines through foundation slabs, walls, and masonry is required. The sealing collar, which has passed the pressure test at 5 bar, prevents moisture from getting into the building along the outer pipe walls. Tested for impermeability up to 50 m water column. Properties:The sealing collar is supplied in pre-assembled condition with 2 stainless steel straps. The circular, 4 cm wide collar, which is equipped with additional waterstops, prevents liquids from getting into the building. Small waterstops inside the collar ensure water-tightness up to a water column of 50 m after tightening of the stainless steel fastening straps.Assembly clean pipe surface if necessary slide on the sealing collar and fix it in the centre of the concrete/wall tighten the fastening straps

Zement-Verbund-Rohr (PVC) mit Spezialbeschichtung

• Homogeneous bond with concrete thanks to special coating • 2 end caps included in the scope of delivery • Gas-tight and watertight

High carbon steel nails

Steel nails - high-carbon steel nails for universal use.

Zement-Verbund-Rohr (PVC) mit Spezialbeschichtung

• Homogeneous bond with concrete thanks to special coating • 2 end caps included in the scope of delivery • Gas-tight and watertight

Zement-Verbund-Rohr (PVC) mit Spezialbeschichtung

• Homogeneous bond with concrete thanks to special coating • 2 end caps included in the scope of delivery • Gas-tight and watertight

Uni Futterrohr UFR mit Anspachtelflansch

The lining tube of the future! - For every type of wall! The Uni casing pipe (UFR) is a plastic casing pipe with an octagonal filler flange (flange made of ABS). When using plastic-modified bitumen coatings (load case in accordance with DIN 18195 Part 4), the external seal can be applied via the filler flange. The profile web sealing tapes included in the scope of delivery ensure a secure seal even with double / element walls and waterproof concrete.Longitudinally watertight up to 1 bar in waterproof concrete (white tub).