Colour spray

Type: EXTERNAL RiveStop SS with stainless steel cover plate and stainless steel rivet mandrel. Ideal for exposed concrete walls in combination with the stainless steel cover. Water pressure tight up to 5 bar. Certified by APPLUS. It is recommended to use RiveStop with stainless steel rivets (SS) for sealing with direct water contact and constant pressing water STEP 1: Insert RiveStop into the opening to be sealed. STEP 2: Remove the mandrel. The rivet will expand until the opening is hermetically sealed.

RS10 bzw. RS11 werden zur Sicherung des Meterrisses bei Baustellen ohne Putzarbeiten und in Tür- oder Fensterlaibungen eingesetzt. In der Farbe rot und weiß erhältlich.

Robust mash connector made of steel of 5 mm diameter including two sputtered plastic clamps. Keeps the distance between the mashes as well as the distance between the meshes and the formwork. Other concrete cover on request!

Anker zur kraftschlüssigen Befestigung an vorhandenen Beton- oder Felwänden. Die Bohrlochtiefe hängt von der Gesteins- und Betonart ab. Sicherheitshinweis: - Ankerstelle vor der Belastung auf Tragfähigkeit prüfen.

EXPANSION TAPE SK is a self-adhesive bentonite expansion tape which expands in contact with water and prevents water intrusion.In contact with water the tapes swell and seal the joint permanently. Test certificates: Tested by the university tBU Greven up to 50 m water column Approved for the usage in contact with drinking waterApplication: Waterproofed integration of pipings into concrete buildings. Sealing of reinforcement connections. Sealing of floor drains. Installation: Remove silicone paper and stick two rings of EXPANSION TAPE SK around the pipe, which has to be sealed. Butt against the joint ends, no overlaps. The surface of the pipes has to be hard. EXPANSION TAPE SK adheres to metal, plastic, PVC and stone. If necessary secure EXPANSION TAPE SK by using a binding wire.

Optical leveling device PNAL 32, PNAL 24 features Stable housing with rubber armouring Splashproof Fast lens Magnetically damped compensator Circular level with penta prism Endless lateral fine drive with slip clutch and operation on both sides Big focus button Target collimator Transport case with double lock and accessories 5 year guarantee

TPE (thermoplastic elastomer) - swelling tape for the safe sealing of construction joints and penetrations, in concrete structures, against the ingress of water. Because of the swelling and the swelling pressure generated during the swelling process no water can penetrate Application: The sealing of construction and connection joints in / on concrete structures in the foundation and groundwater area are typical applications for the FLOWSTOP high pressure swelling tape. As well as all types of penetrations of the building structure in areas that are to be permanently sealed against water. The FLOWSTOP high-pressure swelling tapes are easy, quick and inexpensive to install and are reliable and permanently sealed, even with high water pressure! In comparison to other sealing products no additional upstand is necessary.

Compression hose circular, dim. 5/10 mmwith fabric double-overcoat

The RS20 and RS21 badges are mounted on an unplastered wall and are unmistakable documents for all craftsmen.

Zur temporären Aufnahme großer zentrischer Zugkräfte. Die Bohrlochtiefe hängt von der max. Belastung des Ankers und damit von der Setztiefe ab. Zuverlässige Problemlösung und einfache Handhabung Geprüft von der Universität Dortmund – Institut für Bauforschung Zugelassen für den temporären Einsatz von sechs Monaten und Betonfestigkeiten von min. C 20/25 oder B 25, ungerissen und gerissen Werkstoff: Weißer Temperguss (Lamellen: EN-GJMW-400-5, Konus: EN-GJMW-450-7) Max. Zugkraft NRk,s= 158 kN