Skip to main content Skip to search Skip to main navigation Skip to B2B platform navigation
Filter products
Variants

With the help of our variant list you can find your article faster and easier.

Product Nr.
Product
Abmessung in cm
Stärke in mm
43A1225
Sperrholz - Platten, Glatt - Glatt
125 x 250 cm
4 mm
43A1530
Sperrholz - Platten, Glatt - Glatt Birke
150 x 300 cm
4 mm
43D1225
Sperrholz - Platten, Glatt - Glatt
125 x 250 cm
9 mm
43D1530
Sperrholz - Platten, Glatt - Glatt Birke
150 x 300 cm
9 mm
43J1225
Sperrholz - Platten, Glatt - Glatt Birke
125 x 250 cm
15 mm
43J1530
Sperrholz - Platten Birke
150 x 300 cm
15 mm
43P1225B
Sperrholz - Platten, Birke Glatt - Glatt 120 gr.
125 x 250 cm
21 mm
43P1530
Sperrholz - Platten, Birke Glatt - Glatt 120 gr.
150 x 300 cm
21 mm
Skip product gallery

Customers also viewed

Sperrholz - Platten, Glatt - Glatt Birke

The both sided coat gives these panels high resistance against weather, liquids, etc. Structure: cross-banded construction Gluing: cook and weather-resistant Surface: phenolic coating edge sealed other forms and thicknesses on request

Plywood panels SMOOTH

The both sided coat gives these panels high resistance against weather, liquids, etc. Structure: cross-banded construction Gluing: cook and weather-resistant Surface: phenolic coating edge sealed other forms and thicknesses on request

Dreikant-Profilstäbe Konkav mit Haken

Made of fibre concrete for vertical mats- and round steel reinforcement. Factory length: 18 cm 33 cm Information: Used for vertically reinforcement Easy clip on the reinforcment Continuous threads to break protection  

Sperrholz - Platten, Birke Glatt - Glatt 120 gr.

The both sided coat gives these panels high resistance against weather, liquids, etc. Structure: cross-banded construction Gluing: cook and weather-resistant Surface: phenolic coating edge sealed other forms and thicknesses on request

VIBA Plex F Formwork Board 10

The board is a universal usable and cost-effective shuttering for single and strip foundations. The structure of the board allows the absorption of a lot of pressure and by cutting in one side of the baord, it can be easily bent around corners. Board size: 5.04 m² Advantages: low dead weight of the plate assembly possible without crane and other aids prefabricated foundations with low installation time environmentally friendly, not hazardous to water, material recycling possible single or strip foundations can be made easily without additional tools no abherent required dimensionally stable  

Plugs unruffeld

Plastic plugs (colour gray) to close the spredaer after form removal.  

Sperrholz - Platten mit Siebdruck Oberfläche

Structure: cross-banded construction Gluing: cook and weather-resistant Surface: phenolic coating Edge sealed Silkscreen printing  

Stopper maxi mit Konusverschluss Ø 22 mm

Mit dem Stopper können Mauerstärken aus Faserzement und Kunststoff innen druckdicht verschlossen werden. Beständigkeit: Wasser, UV, Ozon, verdünnte Säuren + Laugen, Gülle + Jauche, Gärungsmaische, Öle + Bitumen, Radon + Methangas, Temperaturbereich - 35 bis + 70 °C Material TPE Druckprüfung nach beidseitigem Verschluss der Faserbetonrohre: Wasserdicht bis 3 bar, Druckprüfung MFPA Leipzig Erweiterte Druckprüfung von 21,5 bis 23,0 mm Prüfzeugnis für den Stopfen zur Abdichtung in Rohrinnenseite. Bitte Einbauanleitung für Stopper anfordern und beachten.Brandprüfung: Feuerwiderstandsklasse E1 120 nach DIN EN 13501-2 mit Faserbetonmauerstärken Klassifikation DIN EN 13501-1 E = normalentflammbar DIN EN 4102-1 B2 = normalentflammbar

Strukturmatten / Matrizen für Betonwand

Textured formliners from Schalbau Vitzthum in various designs for your exposed concrete wall. The mats can be attached to the formwork either with glue or nails. Processing instructions in the download tab. Tolerance range length and width +/- 2.0 mm

Strukturmatten / Matrizen für Betonwand

Textured formliners from Schalbau Vitzthum in various designs for your exposed concrete wall. The mats can be attached to the formwork either with glue or nails. Processing instructions in the download tab. Tolerance range length and width +/- 2.0 mm