Skip to main content Skip to search Skip to main navigation Skip to B2B platform navigation
Filter products
Variants

With the help of our variant list you can find your article faster and easier.

Product Nr.
Product
Abmessung in cm
Stärke in mm
43A1225
Sperrholz - Platten, Glatt - Glatt
125 x 250 cm
4 mm
43A1530
Sperrholz - Platten, Glatt - Glatt Birke
150 x 300 cm
4 mm
43D1225
Sperrholz - Platten, Glatt - Glatt
125 x 250 cm
9 mm
43D1530
Sperrholz - Platten, Glatt - Glatt Birke
150 x 300 cm
9 mm
43J1225
Sperrholz - Platten, Glatt - Glatt Birke
125 x 250 cm
15 mm
43J1530
Sperrholz - Platten Birke
150 x 300 cm
15 mm
43P1225B
Sperrholz - Platten, Birke Glatt - Glatt 120 gr.
125 x 250 cm
21 mm
43P1530
Sperrholz - Platten, Birke Glatt - Glatt 120 gr.
150 x 300 cm
21 mm
Skip product gallery

Customers also viewed

Sperrholz - Platten mit Siebdruck Oberfläche

Structure: cross-banded construction Gluing: cook and weather-resistant Surface: phenolic coating Edge sealed Silkscreen printing  

Sperrholz - Platten, Glatt - Glatt Birke

The both sided coat gives these panels high resistance against weather, liquids, etc. Structure: cross-banded construction Gluing: cook and weather-resistant Surface: phenolic coating edge sealed other forms and thicknesses on request

MEAMAX Light well

The light shaft with integrated height adjustment - Height adjustable Thanks to the integrated height-adjustable attachment, the MEAMAX light shaft can be adapted to the height of the terrain directly during installation or subsequently up to 25 cm - without drilling again, without additional accessories and without unnecessary loss of time during installation. - Installation without thermal bridges Can be installed without thermal bridges or without thermal bridges and watertight when using a MEAFIX installation insulation board and a suitable fastening set.

MEAMAX Light well

The light shaft with integrated height adjustment - Height adjustable Thanks to the integrated height-adjustable attachment, the MEAMAX light shaft can be adapted to the height of the terrain directly during installation or subsequently up to 25 cm - without drilling again, without additional accessories and without unnecessary loss of time during installation. - Installation without thermal bridges Can be installed without thermal bridges or without thermal bridges and watertight when using a MEAFIX installation insulation board and a suitable fastening set.

Concrete adhesive with two components based on epoxy resin.

BFA adhesive is a solvent-free, mineral-filled reactive resin based on epoxy. The product is used for fixing, bonding, and force-locking connections of components made of concrete or reinforced concrete. It is primarily used for bonding exposed concrete plugs and FB plugs. Bonding of other materials is possible but should be tested in advance. The product is not suitable for strengthening or repair purposes within EN 1504-4.  Two-component concrete adhesive based on epoxy resin. Processing/mixing ratio 1:1. The safety data sheet must be strictly observed. Tested for water impermeability (test report no. 213000121-19)

SBA basket

These spacer-baskets are situated between the upper and the lower reinforcment panels. They don't sit on the formwork (no plastic feet), therefore a proper exposed concrete can be arised.Packing units: big band at 800, 600, 400, 200 pieces, small band at 10 pieces.

FC-plugs Ø 22 mm

Fiber concrete - plugs for FC distance tubes. Usually glued inside the fiber concrete tube.

Plywood panels SMOOTH

The both sided coat gives these panels high resistance against weather, liquids, etc. Structure: cross-banded construction Gluing: cook and weather-resistant Surface: phenolic coating edge sealed other forms and thicknesses on request

FB-Mauerstärken Ø 22mm

Rohraußenseite gerauht. Asbestfrei von Wandstärke 15 bis 50 cm Bei Wandstärken über 50 cm werden Verbundspannstellen empfohlen

FB-Mauerstärken Ø 22mm

Rohraußenseite gerauht. Asbestfrei von Wandstärke 15 bis 50 cm Bei Wandstärken über 50 cm werden Verbundspannstellen empfohlen