Concrete adhesive with two components based on epoxy resin.

Product number: 61LKBFAB

Available, delivery time: 1-3 days

Price on request

Stk

Description

BFA adhesive is a solvent-free, mineral-filled reactive resin based on epoxy. The product is used for fixing, bonding, and force-locking connections of components made of concrete or reinforced concrete. It is primarily used for bonding exposed concrete plugs and FB plugs. Bonding of other materials is possible but should be tested in advance. The product is not suitable for strengthening or repair purposes within EN 1504-4.

Two-component concrete adhesive based on epoxy resin.
Processing/mixing ratio 1:1.
The safety data sheet must be strictly observed.
Tested for water impermeability (test report no. 213000121-19)

Downloads "Concrete adhesive with two components based on epoxy resin."

Download Datenblatt Betonkleber Epoxydharzbasis

Customers also viewed

VIBADISTANZ spacer tube (VDZ) incl. 2 plugs

Formwork spacer tube "made of one piece" with two sealing plugs. Secure the wall thickness reliably! Material: HDPE

ZZ-batten

Skidproofed and tilt secured spacer for the bottom reinforcement. There will be no shrinking as the concrete encloses the batten completly. Due to the special form a linear interruption can be avoided. Mill lenghts 200 cm. Other lenghts available.

Rubber squeugee Alu type B

Rubber squeegee, very solid, suitable for heavy use, for pulling and pushing work. For distributing formwork oil, for sealing and sealing in road surfaces, for pushing in pavement and slabs with sand, for cleaning the streets and garages of dirt and slush.

Rundfix (PVC-free)

PVC- free spacers for vertical reinforcement.

Contact adhesive CEM 805 for swelling waterstop and joint sealing strip

CEM805 is a one-component, neutral-odor sealing and bonding compound based on MS hybrid polymer technology. It is solvent-free, silicone-free and isocyanate-free, cures neutrally, is paint-compatible, weather-resistant and offers good chemical resistance. Applications:Contact adhesive CEM805 is used as a system sealant and installation adhesive for hydrophilic waterstops, joint sealing sheets and concrete plugs. Typical applications include: Sealing and bonding in concrete construction for interior and exterior use Tested for watertightness up to 5.0 bar hydrostatic water pressure (= 50 m water column) in the DualProof System (PVC-P), at product transitions and on concrete surfaces Crack-bridging up to 2.50 mm down to -35°C (crack-bridging class A5) Crack-bridging sealant up to 50 m water column Suitable for use on plaster, gypsum, ceramic, glass, wood, metal and various plastic substrates, as well as galvanized steel and aluminum Well suited for bonding construction foils and membranes Suitable for sealing and bonding applications requiring silicone-free systems on site Butt joint bonding of SilverSeal using CEM805 has been tested and proven watertight up to 2.5 bar (= 25 m water column) Hydrophilic joint tapes (Art. No. 61L) and swelling rubber profiles can be installed in a backflow-proof manner with CEM805 in accordance with German general building authority approval (abP) Also suitable for use with fresh concrete bonded waterproofing systems and joint sealing metal sheets. Note: Do not apply on substrates such as bitumen, tar or coatings that may cause incompatibilities and plasticizer migration. Standards and certification CEM805 contact adhesive is tested as a sealant in accordance with EN 15651-1 and certified as EC1Plus according to EMICODE. Product features and advantages: Ready-to-use MS polymer installation adhesive and sealant, free of silicone, isocyanates and solvents, with a broad adhesion spectrum Elastic Non-corrosive Neutral odor Weathering and aging resistant Good UV resistance Virtually no shrinkage No bubble formation Paint-compatible

Kleber für Faserbetonrohre

Two component-special adhesive for water-proof bonding (incl. Hardener). Consumption for 1000 plugs 2 cm length: Ø 22 mm - ca. 3 kg Ø 27 mm - ca. 4 kg Ø 32 mm - ca. 5 kg Ø 40 mm - ca. 7 kg

Rundfix S 4-12/40 mm

PVC-freier Abstandhalter Rundfix in schwerer Ausführung für senkrechte Bewehrung.

VIBA-joint sheet roll ACTIVE - 160 mm unilaterally coated with Bentonit

VIBA thick tin Active is a galvanised, unilaterally full-flatly with active Bentonitcoated sealing metal with source effect. In both forking out a 7,5 cm wide high sticking push connection is raised. incl. 20 connection hangers, 4 push clips + 1,5 m of push connection (self-adhesive)

Einschlaghilfe (Dorn) für Flupp-Stopfen

Einschlaghilfe (Dorn) für Flupp-Stopfen.

Kantenreiniger für H-Träger

Handgerät für die einfache Reinigung von H20-Schalungsträger Kanten.