Go to homepage
Catalogue
Wishlist
Request Basket
Categories
Skip image gallery
Deckenstützen Euro (DC) nach EN 1065

Properties

Ausführung: lackiert
Max. Belastung bei max. Höhe: 16,5 kN
Verstellbereich in m: 1,55 - 2,50 m

Deckenstützen Euro (DC) nach EN 1065

Product number: 25S0EU
Verstellbereich in m
Stk

Description

All versions with failure protection, accident proof.

Props in different sizes and versions.
Failure loads tested according to EN 1065.

  • Produced and tested according to EN 1065, with covered thread (DC).
  • With failure protection and accident proof.
  • Threaded socket with additional bearing ring (slide ring).
  • Headplate: class A 120 x 120 x 8 mm, with borehole Ø 40 mm
  • G-hook: Ø 14 mm (no loosing) with bearing ring.

Properties

Ausführung: lackiert
Max. Belastung bei max. Höhe: 16,5 kN
Verstellbereich in m: 1,55 - 2,50 m
Filter products
Variants

With the help of our variant list you can find your article faster and easier.

Product Nr.
Product
Verstellbereich in m
25S0EU
 Deckenstützen Euro (DC) nach EN 1065
1,55 - 2,50 m
25S1EU
 Deckenstützen Euro (DC) nach EN 1065
1,77 - 3,00 m
25S2EU
 Deckenstützen Euro (DC) nach EN 1065
2,05 - 3,50 m
25S3EU
 Deckenstützen Euro (DC) nach EN 1065
2,3 - 4,0 m
Skip product gallery

Zubehör

Dreifuß-Ständer für Stützen

Suppliable with a galvanised or lacquered surface.

Details
Skip product gallery

Ähnliche Artikel

Dreifuß-Ständer für Stützen

Suppliable with a galvanised or lacquered surface.

Details
Skip product gallery

Customers also viewed

Deckenstütze Euro (DO) nach EN 1065

Produced and tested according to EN 1065, with visible thread (DO). With failure protection and accident proof. Headplate: 120 x 120 x 8 mm, with borehole Ø 40 mm Headplate: * 140 x 140 x 8 mm, with borehole Ø 40 mm G-hook: Ø 15 mm (no loosing).

Boarding for steps

For an effective boarding of steps. Adjustable fromn 85 - 150 cm. Lateral angle profiles with nailholes. Infinite adjustment with wedge fastener

Steel props STABIL (DC)

Produced and tested according to EN 1065, with covered thread (DC). Props in different sizes and versions. With failure protection and accident proof. Headplate: class A 120 x 120 x 6 mm, with borehole Ø 40 mm G-hook: Ø 14 mm (no loosing) with bearing ring.  

Three-layer plate Standard, thick: 27 mm

Three layer plywood weather-resistant glued Surface with  melamine-resin (yellow). Other colours on request. Special formats on request Additional millings possible! All standard cuts are possible!

Betoneisen-Bindedrähte 80 mm

 

Concrete binding wire double

Binding wire double

Deckenstützen Euro (DC) nach EN 1065

All versions with failure protection, accident proof. Props in different sizes and versions.Failure loads tested according to EN 1065. Produced and tested according to EN 1065, with covered thread (DC). With failure protection and accident proof. Threaded socket with additional bearing ring (slide ring). Headplate: class A 120 x 120 x 8 mm, with borehole Ø 40 mm G-hook: Ø 14 mm (no loosing) with bearing ring.

Steel props STABIL (DC)

Produced and tested according to EN 1065, with covered thread (DC). Props in different sizes and versions. With failure protection and accident proof. Headplate: class A 120 x 120 x 6 mm, with borehole Ø 40 mm G-hook: Ø 14 mm (no loosing) with bearing ring.  

Deckenstütze Euro (DO) nach EN 1065

Produced and tested according to EN 1065, with visible thread (DO). With failure protection and accident proof. Headplate: 120 x 120 x 8 mm, with borehole Ø 40 mm Headplate: * 140 x 140 x 8 mm, with borehole Ø 40 mm G-hook: Ø 15 mm (no loosing).

Tripod for props

Suppliable with a galvanised or lacquered surface.

This website uses cookies to ensure the best experience possible. More information...