Skip to main content Skip to search Skip to main navigation
Filter products
Variants

With the help of our variant list you can find your article faster and easier.

Product Nr.
Product
Verstellbereich in m
25S0EUVA
Deckenstütze Euro (DO) nach EN 1065
1,55 - 2,50 m
25S1EUVA
Deckenstütze Euro (DO) nach EN 1065
1,77 - 3,00 m
25S2EUVA
Deckenstütze Euro (DO) nach EN 1065
2,05 - 3,50 m
25S3EUVA
Deckenstütze Euro (DO) nach EN 1065
2,3 - 4,0 m
25SA07
Deckenstütze Euro (DO) nach EN 1065
3,0 - 5,50 m
Skip product gallery

Ähnliche Artikel

Dreifuß-Ständer für Stützen
Suppliable with a galvanised or lacquered surface.
Skip product gallery

Customers also viewed

Tripod for props
Suppliable with a galvanised or lacquered surface.
Baustütze - Mini (DC)
With covered thread (DC). Headplate: 120 x 120 x 5 mm, with borehol ø 40 mm G-hook: Ø 12 mm (no loosing) with bearing ring (loose) Failure loads tested at concentric load, pay attention to security factor!
Lower-Prop head, galvanised
Suitable for props for hole Ø 40 mm. For wood formwork beams H 20
Deckenstütze Euro (DO) nach EN 1065
Produced and tested according to EN 1065, with visible thread (DO). With failure protection and accident proof. Headplate: 120 x 120 x 8 mm, with borehole Ø 40 mm Headplate: * 140 x 140 x 8 mm, with borehole Ø 40 mm G-hook: Ø 15 mm (no loosing).
Protection cap VIBAProtect H
Comply with the requirements for covering vertical reinforcement bars in accordance with § 6 (4) BauV. The protective cap is made of special plastic and it is made in one piece. The cap has a steel insert for optimal safety. The hourglass-shaped body minimizes wear and tear and ensures optimal grip on the iron. The head is optimized for the Austrian market. Therefore, it can also be attached without any problem even when the iron gaps are smaller . Advantages: Narrow head for small iron gaps Reusable Weatherproof PVC - free
Deckenstütze Euro (DO) nach EN 1065
Produced and tested according to EN 1065, with visible thread (DO). With failure protection and accident proof. Headplate: 120 x 120 x 8 mm, with borehole Ø 40 mm Headplate: * 140 x 140 x 8 mm, with borehole Ø 40 mm G-hook: Ø 15 mm (no loosing).
Exposed concrete plugs for pressure cone
The high-quality exposed concrete cones are bonded, with contact adhesive X1, in the remaining opening after removing the pressure cones. Apply the contact adhesive on the backside to obtain a clean visible area.  
Slanted props (DC)
All versions with failure protection, accident proof. Universally usable as pressure- and traction props to support and adjust prefabricated concrete elements and formwoks. Flexible head- and baseplate Headplate: 140 x 100 x 6 mm, with hole ø 20 mm G-hook: Ø 14 mm (no loosing)
Baustütze - Mini (DC)
With covered thread (DC). Headplate: 120 x 120 x 5 mm, with borehol ø 40 mm G-hook: Ø 12 mm (no loosing) with bearing ring (loose) Failure loads tested at concentric load, pay attention to security factor!
Baustütze - Mini (DC)
With covered thread (DC). Headplate: 120 x 120 x 5 mm, with borehol ø 40 mm G-hook: Ø 12 mm (no loosing) with bearing ring (loose) Failure loads tested at concentric load, pay attention to security factor!