Go to homepage
Catalogue
Wishlist
Request Basket
Skip image gallery

Properties

Verstellbereich in m: 2,3 - 4,0 m

Deckenstütze Euro (DO) nach EN 1065

Product number: 25S3EUVA
Verstellbereich in m
Product request
Stk
Deckenstütze Euro (DO) nach EN 1065
Verstellbereich in m: 2,3 - 4,0 m

Fields marked with asterisks (*) are required.

(Product number: 25S3EUVA)

Description

Produced and tested according to EN 1065, with visible thread (DO).

With failure protection and accident proof.

  • Headplate: 120 x 120 x 8 mm, with borehole Ø 40 mm
  • Headplate: * 140 x 140 x 8 mm, with borehole Ø 40 mm
  • G-hook: Ø 15 mm (no loosing).

Properties

Verstellbereich in m: 2,3 - 4,0 m
Filter products
Variants

With the help of our variant list you can find your article faster and easier.

Product Nr.
Product
Verstellbereich in m
25S0EUVA
 Deckenstütze Euro (DO) nach EN 1065
1,55 - 2,50 m
25S1EUVA
 Deckenstütze Euro (DO) nach EN 1065
1,77 - 3,00 m
25S2EUVA
 Deckenstütze Euro (DO) nach EN 1065
2,05 - 3,50 m
25S3EUVA
 Deckenstütze Euro (DO) nach EN 1065
2,3 - 4,0 m
25SA07
 Deckenstütze Euro (DO) nach EN 1065
3,0 - 5,50 m
Skip product gallery

Ähnliche Artikel

Dreifuß-Ständer für Stützen
Dreifuß-Ständer für Stützen
Suppliable with a galvanised or lacquered surface.
Skip product gallery

Customers also viewed

Deckenstütze Euro (DO) nach EN 1065
Deckenstütze Euro (DO) nach EN 1065
Produced and tested according to EN 1065, with visible thread (DO). With failure protection and accident proof. Headplate: 120 x 120 x 8 mm, with borehole Ø 40 mm Headplate: * 140 x 140 x 8 mm, with borehole Ø 40 mm G-hook: Ø 15 mm (no loosing).
Synthetic engagement 22 mm
Synthetic engagement 22 mm
Plastic engagement to connect spreader and concrete tubes.
Deckenstütze Euro (DO) nach EN 1065
Deckenstütze Euro (DO) nach EN 1065
Produced and tested according to EN 1065, with visible thread (DO). With failure protection and accident proof. Headplate: 120 x 120 x 8 mm, with borehole Ø 40 mm Headplate: * 140 x 140 x 8 mm, with borehole Ø 40 mm G-hook: Ø 15 mm (no loosing).
Baustütze - Mini (DC)
Baustütze - Mini (DC)
With covered thread (DC). Headplate: 120 x 120 x 5 mm, with borehol ø 40 mm G-hook: Ø 12 mm (no loosing) with bearing ring (loose) Failure loads tested at concentric load, pay attention to security factor!
Abstandrohre mit aufgerauter Oberfläche von Ø 20mm bis Ø 40mm in Bunden. Standardlänge ist 2,0 Meter.
Spacer tubes with a roughened surface
Spacer tubes with a roughened surface from Ø 20mm to Ø 40 mm in bundlesØ 20mm to Ø 22mm 100 running meters per bundleØ 26mm to Ø 32mm 50 running meters per bundleØ 40mm 30 running meters per bundle
Baustütze - Mini (DC)
Baustütze - Mini (DC)
With covered thread (DC). Headplate: 120 x 120 x 5 mm, with borehol ø 40 mm G-hook: Ø 12 mm (no loosing) with bearing ring (loose) Failure loads tested at concentric load, pay attention to security factor!
Deckenstütze Euro (DO) nach EN 1065
Deckenstütze Euro (DO) nach EN 1065
Produced and tested according to EN 1065, with visible thread (DO). With failure protection and accident proof. Headplate: 120 x 120 x 8 mm, with borehole Ø 40 mm Headplate: * 140 x 140 x 8 mm, with borehole Ø 40 mm G-hook: Ø 15 mm (no loosing).
Tripod for props
Tripod for props
Suppliable with a galvanised or lacquered surface.
Formwork oil Prägnit ST300
Formwork oil Prägnit ST300
Tested formwork oil suitable for all formworks. Good degradable with certificate Mixture of mineral oil and plant-based oil Apply a thin layer for best effect with protection of the formwork. No cleaning of the formwork neccessary.  Degredable for 81% within 21 days.
Exposed concrete plugs for pressure cone
Exposed concrete plugs for pressure cone
The high-quality exposed concrete cones are bonded, with contact adhesive X1, in the remaining opening after removing the pressure cones. Apply the contact adhesive on the backside to obtain a clean visible area.  
This website uses cookies to ensure the best experience possible. More information...