Injection resin - PROTECT Injection resin - PROTECT Expansive polyurethane resin for crack and hose injection in wet areas. Consumption hose compression: ca. 1,5L per 10 m Approved for drinking water applications, low viscosity and permanently elastically, long...
Gun foam 750 ml Pistol foam well B3 is a permanent, one-component assembly foam based on polyurethane for bonding well manhole rings and pipes made of concrete, clay and ceramics. The foam seals and fills the joints and hardens with humidity and...
Reinforcement clamp for connecting the flat... Reinforcement clamp for connecting the flat conductor Version: galvanized M10 screw, flat conductor up to 40 mm, mild steel Ø 6-22 mm
Gun cleaner 500 ml The PU foam cleaner is a highly active cold cleaner for rinsing PU foam guns and removing fresh PU foam contamination. Field of use: PU foam cleaner was specially developed for removing fresh PU foam residues and for cleaning PU foam...
PU foam gun The assembly pistol for comfortable, effective work. The plastic tubes included in the original box are only to be used for exposed areas that cannot be reached directly with the foam gun.
Gun well foam 750 ml Pistol foam well B3 is a permanent, one-component assembly foam based on polyurethane for bonding well manhole rings and pipes made of concrete, clay and ceramics. The foam seals and fills the joints and hardens with moisture from the...
Seal "onion ring" technology Ø 100 mm -... Super segment ring technology for cables and pipes Open the pipe seal. Cut into the selected segment rings at the predetermined separation point with a sharp knife and tear off 5 segment rings with a diameter of 25 - 63 mm segment ring...
Insulation board adhesive 750 ml gun foam The insulation board adhesive is a moisture-curing one-component polyurethane adhesive with low expansion for bonding and for the assembly of facade insulation boards (ETICS). After hardening, the insulation board adhesive is insoluble,...
Ankerstab Ø 20,0 mm (160 kN) schwarz Schalungsanker gewalzt, blank schweißbar. Werkslänge: bis zu 6m Andere Längen möglich - auf Anfrage
Sylodyn NF Violett Einsatzbereich Druckbelastung Verformung formfaktorabhängig, die angegebenen Werte gelten für Formfaktor 3 Statischer Einsatzbereich (statische Lasten) bis 1,50 N/mm² ca. 11 % Dynamischer Einsatzbereich (statische und dynamische Lasten)...
Viewed