Collecting tray 210 lt

Barrel frame (FB1) for drip tray 210 lt

U-shaped bar spacer made of plastic used for the efficient rearrangement of the reinforcement. Mill length 200 cm.  Other lengths on request.

VIBA-Trenn - Multi Elio 28 ist ein gebrauchsfertiges Betontrennmittel, dessen physikalischen Eigenschaften eine einfache Entschalung des Betons nach dem Aushärten ermöglichen.Das Schalöl bildet einen nicht klebrigen Film, der die Trennung des Betons von der Formund eine glatte, perfekte Betonoberäche ermöglicht.Multi Elio 28 ist besonders geeignet für Stahl und nichtsaugende Holzschalungen sowie für Betonelemente die vertikal betoniert werden. Verbrauch:Stahlschalungen : 50 m/l Holzschalungen : 30 m/l

Biological architectural concrete release agent Ricon (Art. No.: 52W3) is an environmentally friendly release agent emulsion based on renewable raw materials. It has been specially developed for producing high-quality architectural concrete surfaces in precast and in-situ concrete construction. The special formulation ensures very light-colored and high-quality concrete surfaces. After application, the emulsion forms a milky white film, which disappears after the water component has flashed off. Once this evaporation process is complete, concreting can begin. Depending on weather conditions, the flashing-off time is approx. 10–30 minutes at 20°C and 60% relative humidity. Properties: Based on renewable raw materials Excellent release performance For visually high-quality and light-colored concrete surfaces Solvent-free and mineral oil-free Low odor Ready to use Easy to spra

VIBA-Trenn - Multi Elio 28 ist ein gebrauchsfertiges Betontrennmittel, dessen physikalischen Eigenschaften eine einfache Entschalung des Betons nach dem Aushärten ermöglichen.Das Schalöl bildet einen nicht klebrigen Film, der die Trennung des Betons von der Formund eine glatte, perfekte Betonoberäche ermöglicht.Multi Elio 28 ist besonders geeignet für Stahl und nichtsaugende Holzschalungen sowie für Betonelemente die vertikal betoniert werden. Verbrauch:Stahlschalungen : 50 m/l Holzschalungen : 30 m/l

The machine SR 1000 is a robust stone cutting machine for wet cutting. Provided with a diamond dividing disc it is used for cutting bricks, Ytong, concrete, lime sand brick, clinker and similar material. Robust, powerful and longliving due to its very stable construction.   Technical data: engine:                 7,5 kW 400 V 50 HZ<?xml:namespace prefix = "o" /> water pump:        TB 16 0.07 kW 400 V 50 HZ dividing disc:       Ø 900 or 1000 mm Bo 60 mm cut depth:             max. 365/420 mm cut height:            650 mm feed:                     automatic with handrail Dimension: overall length       1150 mm overall width         860 mm overall height       2000 mm weight                   415 kg

for fast coating of surfaces (formwork boards, etc.) metal housing

De-icing agent: Sno N Ice is an alternative to conventional road salt for use on concrete surfaces. An additive reliably prevents concrete from spalling and surface scaling (dusting).

Comply with the requirements for covering vertical reinforcement bars in accordance with § 6 (4) BauV. The protective cap is made of special plastic and it is made in one piece. The cap has a steel insert for optimal safety. The hourglass-shaped body minimizes wear and tear and ensures optimal grip on the iron. The head is optimized for the Austrian market. Therefore, it can also be attached without any problem even when the iron gaps are smaller . Advantages: Narrow head for small iron gaps Reusable Weatherproof PVC - free

CEM805 is a one-component, neutral-odor sealing and bonding compound based on MS hybrid polymer technology. It is solvent-free, silicone-free and isocyanate-free, cures neutrally, is paint-compatible, weather-resistant and offers good chemical resistance. Applications:Contact adhesive CEM805 is used as a system sealant and installation adhesive for hydrophilic waterstops, joint sealing sheets and concrete plugs. Typical applications include: Sealing and bonding in concrete construction for interior and exterior use Tested for watertightness up to 5.0 bar hydrostatic water pressure (= 50 m water column) in the DualProof System (PVC-P), at product transitions and on concrete surfaces Crack-bridging up to 2.50 mm down to -35°C (crack-bridging class A5) Crack-bridging sealant up to 50 m water column Suitable for use on plaster, gypsum, ceramic, glass, wood, metal and various plastic substrates, as well as galvanized steel and aluminum Well suited for bonding construction foils and membranes Suitable for sealing and bonding applications requiring silicone-free systems on site Butt joint bonding of SilverSeal using CEM805 has been tested and proven watertight up to 2.5 bar (= 25 m water column) Hydrophilic joint tapes (Art. No. 61L) and swelling rubber profiles can be installed in a backflow-proof manner with CEM805 in accordance with German general building authority approval (abP) Also suitable for use with fresh concrete bonded waterproofing systems and joint sealing metal sheets. Note: Do not apply on substrates such as bitumen, tar or coatings that may cause incompatibilities and plasticizer migration. Standards and certification CEM805 contact adhesive is tested as a sealant in accordance with EN 15651-1 and certified as EC1Plus according to EMICODE. Product features and advantages:  Ready-to-use MS polymer installation adhesive and sealant, free of silicone, isocyanates and solvents, with a broad adhesion spectrum Elastic Non-corrosive Neutral odor Weathering and aging resistant Good UV resistance Virtually no shrinkage No bubble formation Paint-compatible